Missing fuse box cover.
1987 Horizon. Missing fuse box cover, need to know what the corresponding fuses are for and amperage. Also need to know spark plug torque specs.
My car has 75000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Hi there. When it comes to the torque on the spark plugs, most spark plugs are tightened to the stopping point and then an 1/8 turn more. If you need the specs of your spark plug, then measure the treads on the spark plugs and click here for the specs. For the fuse box cover illustration, click here for the diagram and to determine the fuses needed. If you need further assistance with your spark plugs and diagrams, then seek out a professional, such as one from Your Mechanic, to help you.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
Torque is one of the most critical aspects of spark plug installation. Torque directly affects the ability of the spark plug firing end to dissipate heat to the cylinder head. A spark plug that is under-torqued will not be fully seated in the cylinder head and heat dissipation will be slowed.
NGK builds two types of iridium spark plugs: OE Iridium and Iridium IX®. Every plug in the Laser Series was designed for an OEM application. All dual precious metal plugs are designed to provide maximum longevity.
Fit the spark-plug socket over the protruding plug and gently unscrew it from the engine using a counter-clockwise motion. Too much force can crack the plug and cause pieces to fall into the engine. Do your best to ensure no debris enters the spark-plug hole when you lift it out.
Spark plugs that haven`t been changed for a long time can become one with the cylinder head. Fortunately, it`s possible to repair damaged threads instead of scrapping the head.
Many factors can cause a spark plug to fail; from incorrect heat ranges to improper gapping, to chemical contamination. Yet 90% of spark plug damage claims are due to improper torque. Proper installation torque is critical in the plug`s ability to dissipate heat out of the combustion chamber and into the cylinder head.
Many spark plugs are tightened between 8-40nm (nanometer) and should be installed per the torque setting recommended by spark plug manufacturers. Moreover, it should also be done with a torque wrench (a particular socket wrench type) to avoid any over or under-tightening.
Platinum has better performance in terms of durability than other standard spark plugs. However, when compared with iridium, there`s a major difference. Iridium has better performance in igniting the air-fuel compression within the combustion chamber.
87% of mechanics` responses identified NGK as the preferred spark plug supplier. Since being established in Japan in 1936, NGK has always been at the forefront of innovation and technology.
But how tight should spark plugs be? Many spark plugs are tightened between 8-40nm (nanometer) and should be installed per the torque setting recommended by spark plug manufacturers. Moreover, it should also be done with a torque wrench (a particular socket wrench type) to avoid any over or under-tightening.
A completely loose plug, where it can freely turn, could cause damage to threads in the cylinder head, which is aluminum. The spark plug threads are steel, and are harder than the aluminum.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Moisture in fuse box causes fuel pump fuse malfunction
ANSWER : For this, Silicone spray is one tool I personally like to use especially on rubber or silicone seals. The spray will leave a water-tight film on the electrical component and offers a moisture resistant coating. If you would like to have this checked, an expert, like one from YourMechanic can come to your car’s location to inspect the electrical system in order to scope the problem out and pinpoint any problems.
Read Full Q/A … : Missing fuse box cover.
Passenger seat heater not working properly.
ANSWER : Hello and thank you for contacting YourMechanic. The book says that you can use a 15, 20, 25, or 30 amp fuse. The power to the heaters are operated through the wiring to the main harness. There could have been a wire tied into it to make the seat work on the same circuit as the driver seat. This is common to find in the vehicles.
You can try putting a 15 amp fuse in the slot and see if the seat works. Try to avoid using a high amp fuse for if there is a problem with the heater you don’t want to burn it. If nothing seems to work, then the heater in the seat has failed and needs replaced.
If you need further assistance troubleshooting your vehicle, then seek out a technician, such as one from Your Mechanic, that can assist you with a seat inspection at your home or office. Best of luck.
Read Full Q/A … : Missing fuse box cover.
Engine Fuse Box
ANSWER : Yes, you should replace the entire fuse box. The reason for this is that it is quite likely that when the box burned other connections inside the fuse box were also damaged. This will in fact affect the vehicle starting as well. I would suggest having an expert from YourMechanic come to your home to diagnose your starting issue and replace your fuse box if necessary.
Read Full Q/A … : Missing fuse box cover.
Car blows ecm run/start fuse after starting and then dies replaced fuse and repeats
ANSWER : Hi there. Typically when this issue occurs, damage will be instant – meaning if it’s going to damage the ECU, replacing the fuses would not help start the vehicle. So, at first glance, I would assume the ECU is OK. What is more likely is that you have an exposed wire somewhere that is causing the fuses to pop. Trying to diagnose these issues can be tricky sometimes, so it might be a good idea to have a professional mechanic complete an electrical problems inspection to isolate why you’re having these issues and recommend the right repairs.
Read Full Q/A … : Missing fuse box cover.
Missing fuse box cover.
ANSWER : Hi there. When it comes to the torque on the spark plugs, most spark plugs are tightened to the stopping point and then an 1/8 turn more. If you need the specs of your spark plug, then measure the treads on the spark plugs and click here for the specs. For the fuse box cover illustration, click here for the diagram and to determine the fuses needed. If you need further assistance with your spark plugs and diagrams, then seek out a professional, such as one from Your Mechanic, to help you.
Read Full Q/A … : Missing fuse box cover.
FORD CMAX Fuse question. 2014 Ford C-Max
ANSWER : Hello,
Ford (and other manufacturers as well) usually offer the small, specialized electrical parts for repairs such as you describe. Check with www.fordparts.com for your specific needs. For assistance with this project, I would recommend an electrical system problem inspection by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, diagnose this problem, give you an accurate assessment of damage and cost estimate for repairs.
Ford (and other manufacturers as well) usually offer the small, specialized electrical parts for repairs such as you describe. Check with www.fordparts.com for your specific needs. For assistance with this project, I would recommend an electrical system problem inspection by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, diagnose this problem, give you an accurate assessment of damage and cost estimate for repairs.
Read Full Q/A … : Missing fuse box cover.
Cant find the 33rd fuse in fuse box for drivers power seat
ANSWER : Hello, thank you for writing in. There are two fuse boxes located on the vehicle. One is under the hood in the main fuse box. It controls and protects the engine components. The other fuse box is located inside the cab of the car. This interior fuse box controls the components inside the cab, which includes the radio, windows, seats, and other driver controls. It is located below and to the left of the steering wheel. You will find fuse 33 there, and it too will have a diagram on the cover to show you which fuse it is.
Read Full Q/A … : Missing fuse box cover.
I got a code P0191 for the fuel rail pressure and a code P0237 for turbocharger boost.
ANSWER : Hi there. When the battery was arched, the power surge had went through the vehicle and caused some circuits to fail. If right after the power surge happened and now you have a code for the fuel pressure and the turbo, I recommend replacing the fuel pressure sensor on the fuel rail and the barometric sensor on the intake. This should take care of the idle issue and the cut outs along with any problems with performance issues. If you need further assistance with your engine stalling after arching the battery, then seek out a professional, such as one from Your Mechanic, to help you.
Read Full Q/A … : Missing fuse box cover.
