Car doesn’t start only when it wants to
I bought this camaro second hand obviously. It starts only when it wants to and with a super fresh battery sometimes I need to attach a jump start battery aswell. I have no idea but it seems like it's pulling too much voltage when I turn the key. When I turn the key I here a click inside the car and I hear another click I'm assuming from the starter but nothing turning over just clicks. Thank you for your time.
My car has 100000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
It sounds like you need to have the battery cables and starter checked. If all the cables are okay, including the engine grounds from the engine to the body, then the starter is most likely drawing too many amps and needs to be replaced. A starter draw test and starting amperage test will show if the cables and starter needs repairs. I’d recommend having a mechanic check the vehicle out for you, they will able to run these tests and accurately fix your starting problem.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
The most common reasons a Chevrolet Camaro won`t start are a dead battery, an alternator problem, or failed starter.
Your relay for the starter should be located on the drivers side under the dash above the kick panel.
DETROIT – After nine strong model years in the market, with hundreds of thousands sold, the sixth generation Chevrolet Camaro will retire at the conclusion of model year 2024. The final sixth generation Camaros will come off the assembly line at the Lansing Grand River Assembly Plant in Michigan in January 2024.
The suit claims the 2010-present Chevrolet Camaro has inadequate heat shields that fail to protect the starter motor from engine bay heat. The additional heat allegedly puts resistance on the electrical conductors inside the motor, which forces it to use more power than usual to start the engine.
If the car cranks when you turn the key, but the engine won`t start, it could be because fuel isn`t getting to the engine. One potential reason for this could be dirty fuel injectors. Over time, the fuel injector nozzles can become clogged with rust, corrosion or debris.
If the car clicks when trying to start, but still won`t start, this can be caused by a weak battery, dirty battery terminals, a worn starter motor or a stuck solenoid. If might just need a jump start, but there are a few tricks to try before breaking out the jumper cables or electric jump starter.
Though the first Chevrolet Camaro was released in 1966, it was considered a 1967 model. This generation of the Camaro was the shortest-lived of all other generations that came after it. Of all the first-generation Camaro`s engine options, the most common was a 230-cubic inch V-6 with 140 horsepower.
Fact number 1: Did you know that the term Camaro came from the French word camarade, meaning friend/pal? (Now you do) The name suggests the camaraderie of good friends as a personal car should be to its owner.
2017 Chevrolet Camaro ZL1 (Gen 6) | 11.5-Second ¼ Mile
Combined with a top speed of 198 mph, the sixth-gen ZL1 sits on the throne as the quickest and fastest production Camaro model we have ever tested.
The most common reason a Chevy car (or any car) won`t start is a dead battery. If you have a battery tester, check your charge to see if it`s low. A dead battery can also be jumpstarted with jumper cables.
The most common reasons a Chevrolet Camaro key won`t turn are a binding steering column/lock, an ignition switch issue, or a problem with the ignition key. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.
Description. The Blown Camaro is based off of the actual production model from the 1980s. It first appeared with a blown engine and a sunroof however those features (even the interior) vanished and the casting was named `80s Camaro.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My car will not start Intermittently. I purchased a new battery 2 weeks ago and yesterday the car wouldn’t start. Got a jump and
ANSWER : The issue you are having is probably due to an intermittent fault in the starter motor itself or a deficiency in the starter electrical circuit, for example a large voltage drop due to a poor ground or a high resistance connection. These issues can be readily diagnosed and resolved on a mobile basis if you request a hard starting diagnostic. If you request that diagnostic, the responding certified mechanic will get this resolved for you promptly. Based on Toyota’s Factory Service Manual, the battery should not be disconnected if the vehicle engine is running. The battery acts as a large resistive voltage sink and consequently taking the battery out of the circuit, while the alternator is still running, can create a voltage spike on the car’s electrical system which is not good for voltage sensitive components such as the engine computer. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
My car want start and when it do it shut down and want start until 30 minute or so. Now it want do nothing
ANSWER : When a car turns and won’t start, it is called a "crank no start". When this occurs, the first thing you need to do is see what is missing. All internal combustion motors need spark, fuel, injector pulse and camshaft timing to run. If one of these is missing, you have a crank no start. Diagnose the car and see what is missing.
The GM 3.8l motor has been installed in Buicks, Pontiacs and Chevrolets for decades. Particularly during the 90’s and early 00’s, these motors have used an ignition module with three coils mounted to it. This module is prone to just this type of failure. When it gets too hot, it quits working. When it cools off, it starts again. It can also display intermittent no start conditions. This is a pattern failure on this particular motor. Before I would ever replace the module, I would check for spark and injector pulse. If it just lacks spark, I would check for a crank sensor signal and replace the ignition module.
Before we get too far ahead of ourselves, do a few tests first:
Check fuel pressure. If there is none, check the fuse and the relay.
Check for injector pulse with a noid light. If this is missing, I would suspect a crank sensor. It could be a bad Power Control Module (PCM). (PCM’s are very rare to fail. I have never changed a PCM on one of these cars.)
Check for spark with a spark tester. If it is lacking spark but has injector pulse, suspect the ignition module.
If all these are present, I would take a compression test of all the cylinders. If camshaft timing is off, several of the cylinders will have significantly lower compression. Also, camshaft timing won’t start sometimes then not others; it will either start and run bad or it won’t start at all. It may sound like it is trying to start, but it won’t start.
If all of this sounds to daunting, I recommend booking a car is not starting inspection with YourMechanic
Good luck!
Charging warning light comes on when i turn the key and try to start the car and the car want start but when someone tried to give
ANSWER : Hi there:
If you recently replaced your battery, the issue may be caused by a malfunctioning alternator or other electrical component that comprises the charging system on your Nissan Sentra. The best way to find out which item specifically is faulty, is to have a professional mobile mechanic complete a car is hard to start inspection. This will allow the mechanic to determine the precise source of what’s going on with your Sentra and recommend or complete the right repairs.
car hesitates when trying to start the car ,but when started then i shut car off and start again it will start right up
ANSWER : Hi there:
Sometimes when you have problems starting an engine initially it is caused by a restriction in fuel flow; caused either by clogged fuel injectors or the throttle body that needs to be cleaned. Once the fuel starts to flow and engine warms up, it’s much easier to start. However, it could also be an air filter, EGR valve or other components that causes this issue as well, which is why it’s best to have a professional mobile mechanic complete a car is hard to start inspection so they can pinpoint the source of this issue.
Map sensor car won’t start up good ?
ANSWER : Your MAP sensor is an important input for your computer. It helps determine the load on the engine to calculate the correct amount of fuel to inject. It sometimes takes a few seconds for the vehicle to realize that the sensor is not producing a good signal.
At that point, it will use other methods to determine the fuel rate, such as pre-programmed fuel maps, throttle position, etc. I would suggest replacing the MAP sensor and retesting. If you would like to have it checked first, a certified technician from YourMechanic will be able to scan your vehicle and test components to determine the root cause of your starting issue before making a repair.
My car starts fine but always like once a month it doesn’t start it cranks ok but it will not start if I let it sit for 6 hours
ANSWER : Hi There,
What you are describing sounds like an ignition coil that may be failing. Ignition coils are prone to this type of erratic functioning or heat cycling when they are beginning to fail due to the temperature fluctuations under the hood which ultimately cause them to shut down causing the car to only run after cooling down for 30-40 minutes. Ignition coils are coated with a varnish-like insulation that becomes brittle over time after being stretched then contracted repeatedly The insulation develops small fractures that open when heated and close when cooled. When open, they allow shorting of coil windings and decrease or eliminate the coil’s ability to function. This process will repeat itself continuously until the coil ultimately fails completely and must be replaced. I would recommend having a professional from YourMechanic come to your location to diagnose and inspect your ignition system.
Push start will not start on a 2012 Dodge Journey after hooking up subwoofers and amp car did start after hookup but never started
ANSWER : Hi there. Unfortunately, we’re unable to offer technical assistance when aftermarket components or electrical upgrades are installed, as there are simply too many different things that could be causing your ignition problem. I would recommend contacting a local audio visual installation company or local automotive shop that completes electrical repairs to get some ideas, or purchase a service and repair manual for your Dodge to review the relay schematic to determine which ones you need to check and replace. This video might help you learn how to check for damaged relays – so you might want to watch it.
EPC light on and started losing power as well as taking longer to start the car. now the car wont start
ANSWER : Hi There,
The EPC light is typically related to the ECM (computer) not receiving the proper signal from the crankshaft position sensor. A crankshaft position sensor is an electronic device used to monitor the position or rotational speed of the crankshaft. This information is used by engine management systems to control the fuel injection or the ignition system timing and other engine parameters. When this is faulty or not working properly, this will cause problems with the ignition system and generating spark transmission to the spark plugs resulting in starting problems and other performance issues causing misfires. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.
