What do the iPod error messages mean on the audio system?

What do the iPod error messages mean on the audio system?
Experienced mechanics share their insights in answering this question :
Your Accord’s audio system is designed to provide some information in the form of error messages if a problem is encountered while connected to your iPod. You’ll find a brief summary below.

USB Error: This means there’s a problem with the adapter.
Bad USB Device Please Check Owner’s Manual: This means the device is incompatible. Disconnect the iPod, turn off the audio system and then turn it on again. Do not reconnect the iPod.
No Files in iPod: This indicates that there are no files stored on your iPod.
Unsupported Ver.: This indicates that the audio system does not support your iPod’s operating system version. You may need to update the iPod.
Connect Retry: This indicates a bad connection, and the iPod should be reconnected.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

If the radio displays and error (ERR) message, disconnect the black negative under hood battery cable for 1 to 3 minutes to reset the system). TURN THE RADIO BACK ON AND LOOK FOR THE WORD “CODE”. ENTER THE 5 DIGIT RADIO CODE. THE RADIO SHOULD COME BACK ON.
Entering Your Honda Accord Audio System Code

For example, if your Honda Accord audio system code is “22271,” you would press “2” three times, “7” once, and “1” once. This will unlock and reset your car`s audio system.

If the car stereo display says error e, you had a power loss to the stereo and the error e means the wrong 5 digit code for the stereo was input incorrectly 9 times and now is locked. Disconnect the car battery for 1 minute and reconnect battery and now the stereo displays “code”.
A dying battery or even changing the battery will reset your radio the same way a power outage resets your home clocks. Usually, when your battery is changed, all you need to do to reset your Accord radio is to hold the power button for a few seconds until the radio starts up. No code is needed.
Press and hold the audio system`s volume/power knob for about 3 seconds or until the system resets. Press and hold down the audio system`s volume/power knob for at least 7 seconds.
The Honda System Message Indicator (i light) will come on along with a beep to indicate that there`s a problem. On the driver information interface, a message will appear detailing the problem. While the light is on, press the display/information button to see the message again.
What Is A Radio Error E? An E error code on a radio indicates a problem with a car`s audio system. Several reasons exist, including a loose connection, a new accessory, or software problems.
E0 can be caused by an incoming power issues, such as a low voltage condition or excessive power consumption. On occasion this can be resolved by unplugging the unit for 10 minutes.
Retrieving Your Honda Radio Code

Check inside your glovebox where the radio code will be on a sticker that`s placed inside or the sticker will be your vehicle owner`s manual for the code. Your Honda radio code will also have a specific serial number along with similar credentials for your Honda Navigation system.

Turn your car on, but do not start the engine. Turn the radio off. Hold the radio power button down for a few minutes until it resets.
Restore Your Data

To recover data after factory reset Android, navigate to the “Backup and Restore” section under “Settings.” Now, look for the “Restore” option, and choose the backup file you created before resetting your Android phone. Select the file and restore all of your data.

Remove the faceplate from your car stereo. Press the RESET button on the front panel using a pointed object, such as a ball-point pen.
If you`re experiencing issues with your audio, resetting your PC may help resolve the issue. A reset will restore your PC to its default settings, which can help fix audio problems. However, a reset will also erase any personal files and data on your PC, so be sure to back up your files before resetting.
A system message is a neutrally rendered message, shown to all users in a conversation. System messages support wiki-style formatting.
System Message Indicator Light: The System Message Indicator Light is a yellow letter “i” inside a circle. This lets you know when there`s a message regarding your vehicle`s condition on the multi-information display.
Check the inside of Your Glovebox for Your Radio Code

Many Honda models will have the radio code listed on a small white sticker inside the glovebox. The five or six digit code will be labeled “Anti-Theft Radio Code.” Enter this code through the preset radio buttons on your radio.

Retrieving Your Honda Radio Code

Check inside your glovebox where the radio code will be on a sticker that`s placed inside or the sticker will be your vehicle owner`s manual for the code. Your Honda radio code will also have a specific serial number along with similar credentials for your Honda Navigation system.

Alternatively called the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

What do the iPod error messages mean on the audio system?
ANSWER : Your Accord’s audio system is designed to provide some information in the form of error messages if a problem is encountered while connected to your iPod. You’ll find a brief summary below.

USB Error: This means there’s a problem with the adapter.
Bad USB Device Please Check Owner’s Manual: This means the device is incompatible. Disconnect the iPod, turn off the audio system and then turn it on again. Do not reconnect the iPod.
No Files in iPod: This indicates that there are no files stored on your iPod.
Unsupported Ver.: This indicates that the audio system does not support your iPod’s operating system version. You may need to update the iPod.
Connect Retry: This indicates a bad connection, and the iPod should be reconnected.

Read Full Q/A … : What do the iPod error messages mean on the audio system?

What does the check brake system warning mean in the message system?
ANSWER : Your car is equipped with a number of different sensors designed to monitor critical systems for malfunctions and problems, including your brakes. If you see a warning message that reads “Check brake system” come on in your message center, it means that the computer has detected abnormal operation in the brakes. It does not mean that you immediately need to have your car inspected, but if the warning does not go away or continues to come up, you should have the entire system inspected and repaired.

Tip

If you see this warning, test the system carefully to determine if it feels differently (soft, spongy, harder than usual, etc.).

Read Full Q/A … : What do the iPod error messages mean on the audio system?

Intermittent random faults showing up on dash and I drive system. One at a time. Mainly transmission error and lighting system err
ANSWER : Hello. When it comes to power issues while driving, it is typically related to the charging system in some way. A miscommunication with the battery would effect the performance. Before getting too technical, start with the simple stuff. Check the alternator output with a voltmeter, or have it tested at your local automotive store. If both the battery and the alternator are in good working condition, then you can turn your attention to a control module or a programming issue. The warning codes that are being triggered should be read and used to help in the diagnosis. If several different systems are failing, you will likely have a charging system error, or a malfunctioning control module. Further testing is needed.

Read Full Q/A … : What do the iPod error messages mean on the audio system?

How do I use the audio system with a navigation system?
ANSWER : If you have an Accord with an in-dash navigation system, there’s good news. Most of your audio system functionality still comes from the standard buttons on the interface. However, there are some things you can only do by using the “interface dial”. This is the large knob on the lower center portion of your system. It combines three different elements:

The enter button
The rotating knob
The selector direction pad (up, down, left and right)

The selector pad is what lets you access the menu system, and scroll through lists, menus and other items.

To access a menu item, use the arrows or knob to highlight it, and then press enter.

Read Full Q/A … : What do the iPod error messages mean on the audio system?

What does the Service Battery Charging System message mean?
ANSWER : The Service Battery Charging System message can appear on your driver information center (DIC). When the DIC displays this alert, then the charging system for your battery is not operating properly and needs servicing.

Read Full Q/A … : What do the iPod error messages mean on the audio system?

What does the system message notification mean?
ANSWER : If your car is equipped with an information center, you’ll occasionally see messages come across the screen. These range from things like maintenance reminders to information about problems with your vehicle’s systems.

You should see the notification system come on during startup, and then turn off again.
The light may come on accompanied by a beeping sound and a warning in the message center if there is something wrong with the system.

You can cycle through the messages by pressing the information button (i). This will allow you to see old messages, as well as determine if there is a problem.

Read Full Q/A … : What do the iPod error messages mean on the audio system?

What do the error messages mean when playing a USB device?
ANSWER : Your car’s audio system can display a number of different error messages when something goes wrong while playing files or connecting to your USB flash memory device. Below, you’ll find a brief summary of these.

USB Error: This means that there’s a connection problem with the adapter.
Bad USB Device Please Check Owner’s Manual: This means that the device is not being recognized as compatible. Disconnect it, turn off the audio system, and turn it on again. Don’t reconnect the device.
Unplayable File: This means the file type is not supported or is protected.
USB No Song: This message indicates that the flash drive is empty.
Unsupported: This means that the device is not supported. Reconnecting can help if you are using a device you know is supported.

Read Full Q/A … : What do the iPod error messages mean on the audio system?

What does the Service AC System message mean?
ANSWER : The Service AC System message can appear on your driver information center (DIC). When the DIC displays this alert, then there is an issue with your air conditioning system, and the system needs to be serviced.

Read Full Q/A … : What do the iPod error messages mean on the audio system?

Eric smoalih

I am a certified master technician with the National Institute for Automotive Service Excellence (ASE), and I have been working as an auto mechanic for over 15 years. I am passionate about my work, and I take great pride in helping people keep their cars running smoothly.