My car vibrates when I’m waiting at the light . It drives fine . And it vibrates more when I turn on the ac? Can itvtve motor moun
My car was driving fine . Well I believe it started yesterday I notice when I turn on my ac my car will vibrate so I turn it off. This morning dropping my daughter off at school I tried to turn on the ac and my car was vibrating I turned it off . It stopped but when I stopped at the light it continued to do it . It drives fine but when I stop my car will continue to vibrate. Not sure if it's the transmission or the motor mounts .
My car has 72000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
There are two principal possibilities: faulty motor/transaxle mounts, or an engine operating or mechanical condition including the possibility of a faulty harmonic balancer. To obtain a conclusive diagnostic, please simply request an engine vibration diagnostic and a certified Mechanic, dispatched by YourMechanic right to your location, will get this resolved. If you do need new motor/transaxle mounts, genuine OEM Nissan mounts are recommended in order to maximize the chances of resolving the problem. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
Common reasons for this to happen:
Loose connections at the positive and negative battery terminals. Very dirty or clogged air filters can also cause your engine to underperform. Loose timing belts are another likely cause. A mechanic will check these and replace them if they appear loose and worn.
Motor mounts: It`s the job of the motor and transmission mounts to dampen vibration. When they break, you`ll feel excessive vibration, especially at idle. You can diagnose this yourself by putting your car in neutral. If the shaking lessens, you very well could have broken mounts.
Engine mounts are made of a hard rubber material which allows them to absorb these vibrations. When a motor mount is damaged or broken, not only will you feel excess vibration in the car, other parts in the engine can get misaligned and ultimately break since the engine is not in its precise location.
Increased Vibrations
One of the most common engine mount symptoms is increased vibrations while using your vehicle. If you start your engine and notice that it is making more noise than usual and you can feel more vibrations than usual, this is a key sign of a worn engine mount that may need replacing.
The more your fuel intake system is clogged, the less efficient your engine uses fuel, which can cause it to shudder when you`re at a stop. Fuel is delivered to your engine by fuel intake valves, and these should be cleaned regularly to prevent clogs and a shaky sit at a red light.
One common cause of shaking while idling can be loose engine mounts. Engine mounts are the connections between your engine and your car — they keep your motor safely attached while dampening vibrations produced by your engine.
` Over time, the noise then starts to become an unmistakeable `clank` or `bang` before resulting in the failure of the mount or even worse – the engine. In summary, inferior or damaged engine mounts can cause vibration and damage, whilst replacing your engine mounts can eradicate all the above issues.
When an engine or transmission mount fails, the result usually is harsh vibration from the movement between the body and drivetrain. When a mount fails, the rubber inside typically either has broken or deteriorated enough that it no longer will dampen movement, creating violent shakes or shutters.
There are a few reasons your car may shake when accelerating but not coasting. The most common reason is that the engine is misfiring. When the engine misfires, it doesn`t run as smoothly as it should and can cause the car to shake. Another possible reason is that the spark plugs or ignition coils are dirty or damaged.
Usually, when you have a vibration that occurs while in gear, it will be caused by either an engine misfire, something bent inside the driveline (like a damaged CV axle or input shaft) or perhaps internal damage inside the automatic transmission.
If your vehicle is shaking when you are idling at a complete stop, the problem is likely to be damaged or broken motor mounts or transmission mounts. Broken motor or transmission mounts can result in severe motor shaking and should be fixed before causing other serious mechanical problems.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My car vibrates when I’m waiting at the light . It drives fine . And it vibrates more when I turn on the ac? Can itvtve motor moun
ANSWER : There are two principal possibilities: faulty motor/transaxle mounts, or an engine operating or mechanical condition including the possibility of a faulty harmonic balancer. To obtain a conclusive diagnostic, please simply request an engine vibration diagnostic and a certified Mechanic, dispatched by YourMechanic right to your location, will get this resolved. If you do need new motor/transaxle mounts, genuine OEM Nissan mounts are recommended in order to maximize the chances of resolving the problem. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
2007 Nissan Altima motor mounts are new the motor vibrates a lot went the car is in drive with the ac on went I turn the ac off it
ANSWER : Hi there. It is possible that you have a vacuum leak or perhaps the transmission mounts are loose, as usually these symptoms are common with worn out motor mounts. When the AC is activated, it does create additional drag on the motor, which can make a small vibration even worse. It’s probably a good idea to have a professional mechanic come to your location and try and replicate the symptoms you are describing by completing a car is shaking or vibrating inspection.
As I’m driving, all my lights inside/out of the car turn off and the car still stays on. But when I turn the car off it won’t turn over
ANSWER : Hello there. The charging system on the car may not be charging the battery as you drive and the systems that keep the engine running are priority so the engine will stay running until the voltage drops below about 9 volts but the lighting and some other accessories may cut off above this voltage first. You should have the charging system tested to see if the alternator needs to be replaced.
Car won’t turn over. No lights come on when I turn it. Can’t even lock my doorsvor push the seat up or back.
ANSWER : Your probably correct, it sounds as though your battery is done. But it also sounds like you have charging system issues. I’m not sure that fixing your battery and charging system will solve the problem with the car shutting off, but it’s possible that it will and it’s a darned good place to start. By contacting Your Mechanic, you can have a technician come to your home or office to check out your car and help you figure out what to do next.
Low coolant light comes on when AC, defrost or heater is on, but only if the car is in gear and stopped, what’s wrong with my car?
ANSWER : First, you want to make sure your cooling system is full. Check the radiator not the coolant jug. And check it when it is cold. If it needs coolant, add some. Of course, I don’t feel this problem is an actual low coolant condition. I would expect to find an electrical failure in the instrument cluster or from a component or wiring harness that is connected to the instrument cluster.
As a technician, I have access to reports from technicians across the country. I could not find any reports of this problem, so diagnosing this will require an experienced tech as this is not a common problem. In addition, this happens at intermittent times making it difficult to recreate. The most challenging part of this diagnosis will be recreating the symptom. I suspect it has something to do with the brake switch circuitry because it only seems to happen when you have your foot on the brake. I would begin my diagnosis there with a wiring diagram and test light in hand. The brake switch, instrument cluster, and environmental controls all interact with each other. Something is crossed either because of a failed module or damaged wiring in a harness.
Aside from making sure the coolant is full, this will not likely leave you on the side of the road. If you take it in to be diagnosed, be prepared for them to spend more time than usual to figure it out. Since it isn’t a key problem, you may need to live with it until it completely fails making it much easier to diagnose. Either way, I do recommend having a certified mechanic diagnose the warning light to make sure there isn’t anything serious going on.
Good luck.
Okay so when I turn my lights on at night my brake lights do not work, when I don’t have my lights on they work fine.
ANSWER : Hi there. Based on your inquiry, it’s highly probable that you have a damaged light switch or some electrical fault inside the turn signal relay. However, it’s also possible that the brake switch above the brake pedal could also be the source of your problem. Due to the fact that multiple electrical components might be causing this issue, it’s a smart idea to first have a professional mobile mechanic complete a brake lights are not working inspection, so they can determine what’s causing all of these issues and recommend the right repairs.
Was driving on the expressway and my car started shaking, check engine light turned on, oil light turned on and off
ANSWER : Hello, thank you for writing in. Shaking and vibrating typically comes from a misfire, or poor engine performance. A lack of oil will absolutely contribute to these symptoms and amplify them, if not cause them to begin with. You want to turn your attention to the cause of the oil leak. If external (you can see the leaking oil), then you will want to trace the leak to the component which has failed. If the leak is internal (or the engine is consuming oil), the leak will be harder to find. It will also explain the poor engine performance due to excess oil in the combustion chamber. A head gasket is one of the main components that will fail and cause these issues. It is however not common for a vehicle this age to have these kinds of problems. You will also want to scan the computer, and see what codes are triggering your check engine light. These diagnostic tools will help you determine what system(s) is to blame for the malfunction. For more diagnostic help, contact our service department to schedule an appointment.
Driving, then engine/oil light turns on, steering locks up, car dies; but just fine after turning off than on.
ANSWER : Any time loss of steering, or power assist to the steering is lost, it can be a safety issue and should be looked into as soon as possible. If the oil light and/or check engine light are flashing before it stalls, it can be a few different issues causing this. Also, a fault code may be stored in the system. Warning lights flashing after the engine stalls is normal. Most engine control units monitor readings from the oil pressure switch as well as the dozens of other sensors. Make sure the engine oil level is correct. If the oil pressure switch is intermittently losing it’s signal, then the ecu may think there is no engine oil pressure and shut down as a safety measure.
Have a certified technician look into the engine stalling as soon as possible. Losing steering and brake assist can be a safety hazard.
