how can i get replacement keys for the mechanical key blades attched to the 2 remote control keys of my ford explorer 2014 model
My car is a ford explorer 3.5 L V6 limited edition i lost the mechanical key blades and the master key together with their code number tags how could i get the replacement of the said mechanical key blades and the master key as well.
My car has 11000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Unfortunately, the only way to get a replacement Intelligent Access key for your vehicle is from the Ford dealer. The keys will need to be programmed with an OEM capable scan tool as well, before the vehicle will recognize them.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
If you have a new Ford key fob or are experiencing problems with remotely locking and unlocking your car, SUV, or pickup truck, don`t panic. You`ll find that Ford key fob programming is very straightforward and easy to do on your own.
As long as you can prove ownership of your vehicle a car key can be made with the Vehicle Identification Number aka VIN number.
If your coded keys are lost or stolen, and you do not have an extra one, new coded keys may be obtained from your Ford Dealer.
Replacing a lost car key for a “keyless ignition” vehicle
If you don`t have an extra key, you`ll likely need to get a replacement at a dealership and provide proof of ownership, according to Carfax. The dealership will then program a new key to work with your car.
Many locksmiths can cut and program a key for about half the cost of a dealership replacement. Some dealers even utilize the services of outside locksmiths for replacement keys. An experienced locksmith will be able to make a replacement key for you even if you do not have the original.
Call a Locksmith or Roadside Assistance
They will drive to you and make a car key on the spot, even if you don`t have the original. If you need a more technologically advanced key, like a key fob, key fob with switchblade key, transponder key or smart key, call roadside assistance instead of a locksmith.
How does this work? Well, most desks, cabinet and small locks have numbers etched on or near the key hole. That number can be used to get a code and that code is used to cut a key. As for car keys, with a vin number and proof of ownership, we can get a code and cut a key.
1. An Auto Locksmith. Cheapest – This is usually the least expensive as an auto locksmith will have all the equipment to replace all types of keys and for most vehicle manufacturers models as well.
Factors in Car Key Cost
Modern keys feature advanced transmitters, codes and programming, which leads to a higher cost because they take more time to duplicate and the actual hardware is more expensive.
Conclusion. Reprograming your key fob is paramount to keeping your car secure for only authorized ignition and entry. Fortunately, car owners can reprogram key fobs themselves. The probability of this procedure working is high but except for some more luxurious and complex vehicle models.
Transponder key programming starts at $50 – $75. This includes keys for GM, Ford, Dodge, Honda, Toyota, Nissan. Remote or fob programming starts at $65.
Conclusion. Reprograming your key fob is paramount to keeping your car secure for only authorized ignition and entry. Fortunately, car owners can reprogram key fobs themselves. The probability of this procedure working is high but except for some more luxurious and complex vehicle models.
Yes, you can take a used key fob and reprogram it for your car. You will need to have the key fob programmed by a professional, but it is possible. The key fob reprogramming process will vary depending on the make and model of your car.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
how can i get replacement keys for the mechanical key blades attched to the 2 remote control keys of my ford explorer 2014 model
ANSWER : Unfortunately, the only way to get a replacement Intelligent Access key for your vehicle is from the Ford dealer. The keys will need to be programmed with an OEM capable scan tool as well, before the vehicle will recognize them.
If I replace the ignition switch, can I use my existing BMW Keys with remote and valet key?
ANSWER : Yes, you can. The ignition switch is separate from the EWS system, so replacing the switch will still allow you to use the current keys you already have. Only if you have to replace a faulty key or EWS module will you have to possibly order all new keys.
One other possibility is there is an EWS issue where the key is not being properly identified not allowing the starting sequence. This would mean ordering an EWS module or keys from the dealer. Try out all keys you have to see if any will commence in the starting sequence. If none of the keys will start the vehicle, faults should be checked to ensure there are no EWS key identification faults. If no faults are present, then most likely the ignition switch is faulty. If there are key identification faults, then it’s either a key, module, or receiver that is the issue. You may want to consult with a mechanic who has the equipment to read out the Powertrain and EWS fault memories before replacing parts.
How to replace an ignition cylinder? do I also have to replace ignition switch? cause key has a chip that’s specific my dodge.
ANSWER : In some cases i have seen the outer ignition housing okay and just the key lock cylinder damaged. In others they damage the housing and ignition lock cylinder. In either case you cannot use your key; it will be a problem since the chip is programmed to your vehicle and will require programming. You may have to replace the entire housing on the column and have the new ignition key reprogrammed to start the car.
Before you purchase any parts, have it inspected to see the damaged parts so you get what is needed. You will need a qualified mechanic to install parts and program the key with a factory scanner. This may mean the dealer will have to do the programming of the new key or a specialized locksmith.
Key always is getting stuck in the ignition
ANSWER : The ignition key lock cylinder on the 2001 to 2007 Ford Focus is prone to binding and sometimes will not release, causing the key to get stuck. The fix is to replace the ignition key lock cylinder in the steering column. The old key and new key need to be cut to match so the same key will open the doors and work the ignition. The new ignition key lock cylinder comes with new keys which can be cut at any locksmith. You can make an appointment with a certified mechanic such a one from YourMechanic to have the key lock cylinder replacement done at your home or office.
Recently got a Honda and told the mechanic the wrong model year when replacing a muffler
ANSWER : Your present engine has about 6% greater displacement than the engine used in the 2000 model year (1.7L versus 1.6L). Greater displacement means there is a higher volume of exhaust gases flowing through the system. As a consequence, the muffler used in 2003 was designed to be 15% larger in volume compared to that used in 2000. (The 2003 muffler is an oval 15 inches long by 7 inches by 9 inches. The model year 2000 muffler is an oval 13 inches by 7 by 9. That means there is 15% more interior space in the 2003 muffler.) The difference between the exhaust flow in the two cases, while not "trivial", is probably not significant enough to warrant changing the muffler particularly if you are not noticing any adverse effect on vehicle gas mileage. If you getting the EPA rated gas mileage or better, I wouldn’t worry about it. However, if you want to absolutely confirm the acceptability of this arrangement, simply measure exhaust back pressure. If back pressure at idle is around 1.5 PSI and holds steady and pressure rises to 3.0 PSI at 2,000 RPM and holds steady, then you are definitely in good shape (no restriction) and you need not change anything. Despite everything, if you do want the muffler changed out simply request exhaust system service – muffler replacement and the responding certified mechanic will get you restored to the status quo ante. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
2008 Ford Edge turned key on key off key on and displayed check brake system and went off but able to replicate every time
ANSWER : At key on, many dash warning lights will come on momentarily, and then turn off, as a system test as well as bulb check. If the brake warning light goes off immediately, that is normal. If you suspect a fault though, a mechanic can be dispatched to perform a warning light diagnostic, which would include a check for any trouble codes that might have set. The mechanic would also check to see if the light perhaps refers to required maintenance involving the brake pads. Finally, inasmuch as you have referred to a brake system related warning light, one thing you can and should do is check the level of brake fluid to be sure it is above the minimum level in the reservoir. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
Will the motor and transmission from a 95 Ford Explorer fit into a 2000 ford explorer sport
ANSWER : Hi there. If the engine size is similar and the transmission is identical (meaning an automatic w/automatic), then the motor mounts for the two vehicles should align. I would highly recommend consulting with a local engine replacement shop to confirm this, since it’s not a service we offer. There could be electrical / computer and sensor compatibility issues that should be verified before completing this service.
Replacing an ignition lock cylinder with no keys?
ANSWER : Hi there. Typically trying to get a key made to fit an ignition lock cylinder is next to impossible. The best advice we’d suggest is to replace your ignition lock cylinder; and make multiple copies of the keys (just in case this happens again).
