Car leaking and overheating.

ANSWER : Coolant leaks can occur because of cracked hoses, leaking gaskets, faulty water pumps, or damaged radiators. When the coolant level goes low, the engine will start to overheat due to the low coolant level. I would first recommend giving the cooling system a visual look over. If it is not obvious where the coolant leak is coming from, I would recommed having the cooling system pressure tested in order to determine the leak source. If you would like to have your cooling system pressure testedcoolant is leaking inspection, consider YourMechanic, as a certified technician can come to your home or office to inspect your cooling system.

ANSWER : Hi Ricardo. We answered your question earlier. However, if you didn’t receive the reply, here is what we stated earlier. In most cases, an EVAP leak will create an OBD-II trouble code. The best way to detect an EVAP leak is by having a professional mobile mechanic complete a check engine light inspection, they will be able to download the code and determine the source of the leak. That’s the best advice we can offer you. Thanks.

ANSWER : Hello,
There are a number of things that could make an engine noisy when starting up. Depending on the specific type of sound you are referring to, this will determine how to properly diagnose. If there is a bit of a hissing sound, this may be a sign of a vacuum leak. If this is more of a shrieking sound, this may be a sign of a worn out or out of adjustment serpentine belt. If there is a bit of a howling or growling sound, this may be a sign of a worn out or low on fluid power steering pump. A rattling or pinging sound may be caused by an ignition problem. An engine can ping (or knock) due to an improper combustion process. A "spark knock" is the result of combustion occurring too early. Early combustion can occur from carbon buildup inside the combustion chamber, a lean air/fuel mixture, and advanced ignition timing (spark plug firing too soon). A clattering type sound may be a result of improper lubrication in the valve train which could be a more serious problem and should be addressed as soon as possible. I would suggest having an expert from YourMechanic come to your location to diagnose and inspect your vehicle to ensure everything is in proper working order.

ANSWER : Hi there. In most cases, an EVAP leak will create an OBD-II trouble code, which is the best way to detect an EVAP leak. By having a professional mobile mechanic complete a check engine light inspection, they will be able to download the code and determine the source of the leak. In most cases, it’s an EVAP purge solenoid that is faulty.

ANSWER : Hi there – you may have 2 related events here, a coolant leak, and a problem with the heater system. The current issue may be air inside the cooling system, which can cause overheating, and a lack of heater function. The lack of heater function could have 5 causes: the engine is not getting up to correct temperature (center of the gauge) due to a malfunctioning thermostat, the heater control valve is not letting hot coolant into the heater core, there is a restriction in the heater system that is preventing adequate hot coolant flow through the heater core, the heater fan is not working to transfer heat from the heater core to warm air for the passenger compartment, or the air blend doors inside the heater are not working properly to route warm air to the desired vents. I would recommend a heater system inspection](https://www.yourmechanic.com/services/heater-is-not-working-inspection) by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, diagnose this problem, give you an accurate assessment of damage and cost estimate for repairs.

ANSWER : Going by your description and the age of the car, I’m going to guess you have a problem with your water pump. The water pump has a rotating seal that often doesn’t leak unless the engine is running. If your water pump is leaking you might be able to see a drip from the bottom of the engine front cover. Before jumping to any conclusions though, you should have a professional pressure test the system to be sure. If you contact Your Mechanic. they can send a technician to your home or office to check out your leak and tell you what it will take to solve it.

ANSWER : The heater AC (air conditioning) case has a drain to let out condensation from the case. The heater core is positioned in the case that allows it get out through the case drain on the outside of the engine firewall between the center toward the passenger side of the car in the case of a leak. Bypassing the heater core has stopped the leak but the heater and defroster is not inoperative along with the automatic temperature control of the air conditioner. I recommend having the heater core inspected and replaced to fix the system.

ANSWER : Hi there. What had happened is the wrong key set the security to the vehicle. This is to prevent the vehicle from starting with the wrong keys. Try removing the battery cables (+) and (-) for 13 minutes. During that time, put the original key in the ignition and turn it on. Activate everything in the car even though there is no power. Then remove the key and hook up the battery cables. The computer should have reset and reset the security. If the security is still being tripped, then I recommend seeking out a professional, such as one from Your Mechanic, to help you