Brake pads replacement
Hi,
Recently I had taken my car to the service station and was told that I would need a brake pad replacement in another 2K miles (front ones) and back ones in another 5K miles.
I was getting screeching noise when I apply brakes.
I wanted to check with YourMechanic team to get a better understanding if I need to change them.
If you could assist me regarding this, it will be really grateful.
Recently I had taken my car to the service station and was told that I would need a brake pad replacement in another 2K miles (front ones) and back ones in another 5K miles.
I was getting screeching noise when I apply brakes.
I wanted to check with YourMechanic team to get a better understanding if I need to change them.
If you could assist me regarding this, it will be really grateful.
Thanks & Rgds
-Nanda-
My car has 38000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Hello, thanks for writing in. Generally most brake pads have a specific thickness tolerance that is used to warn the owner of the vehicle of when it may be time to replace the pads. What this means is that you will hear a slight squeaking at a certain point when the pads wear down to this point. I would recommend having an expert from YourMechanic come to your home to perform a brake inspection on your car to be sure this is what the squeaking relates to. We can also perform a brake pads replacement for you if needed.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
Brake pads for a Subaru can cost anywhere between $150 per axle and $450 per axle depending on the type of brake pad desired.
Generally, brake pads are replaced after every 50,000 miles travelled. However, situations may arise when you need to get them changed earlier than that. Here are a few signs to look out for to identify whether your Subaru needs a brake replacement.
Brake pads usually need to be replaced after covering around 50,000 to 70,000 kilometres. It is important to note that some factors may trigger faster wear and tear of brake pads, such as high-speed driving, driving in stop-and-go traffic, or towing heavy loads.
While it might seem more cost-effective to just replace the worn pads, it can be dangerous and unwise in the long run as all four pads should always be replaced together. Regular brake maintenance is essential to ensure your vehicle`s performance and safety on the road.
How much does it cost to replace all 4 brake pads? To replace all four brake pads, including parts and labor the cost ranges between $230 and $600 for all four wheels. These materials range in quality from poor quality to premium.
Subaru brake pads usually last between 30,000 and 70,000 miles depending on your driving habits. If you commute in heavy traffic and use your brakes frequently, you`ll need to get an check more consistently.
At a basic level, cars like your Subaru use what are called “friction” brakes. These brakes use the contact between two types of material to bring the car to a halt. A friction brake may be either a disc brake or a drum brake.
Brake pads generally last between 30,000 and 70,000 miles, but some can last as long as 100,000 miles.
Brake pads can last anywhere between 30,000 and 70,000 miles. Their longevity depends on your driving style and typical driving conditions. Using data provided by Federal Highway Administration statistics on how many miles people drive annually, typical brake pads will last between 3 and 7 years.
Semi metallic pads have a better durability since they are 30%-70% metal. You can expect a semi metallic pad to last for about 50,000 miles. Ceramic pads are made from ceramic materials mixed with copper fibers. These car brake systems are usually found in luxury cars and are meant for comfortable braking.
Brake wear recommendations
We`ve heard that some local shops are recommending replacement with 30% left, and feel that is a waste. It might be helpful to hear at 30% that brake pad replacement should be coming soon, but there is still plenty of good wear at 30%.
Your front brake pads will also wear down faster than your rear pads. The front of your vehicle handles a lot more weight transfer as you brake, causing more wear. Over time heat and friction also contribute to brake pad wear. Which axle your brakes are on will also influence how much wear and tear your pads sustain.
Every car comes with two front brakes and two rear brakes. Older vehicles typically have drum brakes in both the front and rear. In contrast, modern cars tend to have either disc brakes on all four wheels or disc brakes in the front and drum brakes in the back.
If your brake pads are squealing or grinding, it might be time for a brake pad replacement. You will be pleasantly surprised to find that you can replace the pads in your car`s disc brake system quickly, easily and without specialized tools. Doing it yourself also will save you a lot of money.
Brake pads and shoes are generally thought to be good between 30,000-35,000 miles in urban use. In less demanding situations like highway driving in light traffic, brakes may last 80,000 miles or more.
The braking system is one of the most critical safety components of any vehicle, including Subaru models. However, Subaru owners may encounter brake problems that require attention to ensure optimal performance and safety.
Generally, your brake pads should all wear at the same time, which makes for an easy replacement. Typically, you should have both your front brake pads replaced at the same time, and your rear pads replaced at the same time, to ensure proper braking power.
You should check your brake pads every 6 months or every 15,000 miles. Most brake pads will wear out in about 25,000 to 65,000 miles, however, the wear and tear on your brake pads depends on a wide variety of factors including your driving style, what surfaces you`re driving on, and the weight of your vehicle.
Akebono brake products: trusted by original equipment manufacturers worldwide. Akebono`s OEM customers include Ford Motor Company, General Motors, Honda, Isuzu, Mazda, Mitsubishi Motors, Nissan, Stellantis, Subaru, Toyota and Volvo.
Standard on every Subaru, ABS keeps your wheels spinning during braking.
Your brake pads are designed to last up to 40,000 miles. However, depending on how you brake, this could shorten the mileage longevity—especially if you slam on the brakes often. If you`re an average driver who drives about 1,000 miles a month, you`ll want to change your brake pads about every three and a half years.
At your rate it will take 33/7 or about another 5K miles to wear another 1mm.
On many cars, the brake pad can be seen through the wheel. Look at it to determine its thickness. If it seems very thin, less than ¼ inch, it is likely in need of replacement, according to J.D. Power. Some brake pads have a slot in the center that serves as a wear indicator.
Unfortunately, what happens when your car brake pads are worn out is it exposes the metal, and the metal on metal grinding can further damage the entire braking system through heat and possible breakage. So, driving with worn out brake pads is a risky game you don`t want to play.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
EPC light on 2004 Jetta. Code said brake switch faulty, but brakes lights worked. Replaced brake switch, now no brake lights.
ANSWER : Hi there. The first thing that pops in my mind beyond of what you have listed is perhaps the electrical harness attached to the brake switch. Perhaps the harness itself is damaged or you have an exposed wire, loose ground wire somewhere. You might want to have a professional mobile mechanic come to your location and complete a brake lights not working inspection to help you diagnose this issue.
Read Full Q/A … : Brake pads replacement
I replaced the brake light switch. Gear lever unlocked because it had locked. Now the brakes feel hard.
ANSWER : Hi, thanks for writing in. You need to check the brake switch install adjustment. You may have the switch adjusted too tight and it is holding the the brake pedal partly down. This will cause the brake master cylinder to not release the brakes when you let off the pedal. Readjust the switch away from the pedal until you feel some free play again in the pedal. This should fix the problem. If you would like help, consider having an expert automotive technician from YourMechanic come to your home or office to inspect and diagnose this issue for you, and make or suggest any repairs as needed.
Read Full Q/A … : Brake pads replacement
Brake calipers needing replacement after brake pads and rotors were replaced?
ANSWER : I think you have it backwards. The pads and rotors do not cause bad calipers, but a sticking or binding caliper can cause the pads to wear excessively and cause the pads to dig into the rotors. The calipers may not of been binding until the caliper pistons had to be pushed back to install the new pads. It would be recommended to have the brake system flushed after replacing the calipers, pads, and rotors so the system has all new fluid. A certified technician from YourMechanic can come to your car’s location to perform any needed repairs with your brake system.
Read Full Q/A … : Brake pads replacement
Low brake pedal and anti-lock brakes are not kicking in.
ANSWER : The brake pedal is working to stop the vehicle, but there may be air in the controller unit causing the ABS brakes to not function. I recommend bleeding the brake system from the farthest location from the master cylinder to the master cylinder including the ABS unit. If the brakes are still spongy after a full bleed, then the controller will need to be replaced. If you need further assistance with your brake pedal being spongy, then seek out a professional, such as one from Your Mechanic, to help you.
Read Full Q/A … : Brake pads replacement
Have replace rear brake pads 6 times in three months.
ANSWER : Hi there:
It’s very possible that you have either a warped rotor that is causing your brake pads to constantly rub or the caliper is damaged; causing the same problem. You should have a professional mechanic complete a rear brakes inspection before the issue gets worse and creates a potential safety issue.
Read Full Q/A … : Brake pads replacement
Brake pads replaced but still feel soft
ANSWER : It sounds like your 2006 Freestar does have a legitimate brake issue and the mechanics you are currently going to have not identified it. You need to have confidence that your brakes are "working as designed" and will stop your vehicle! You may want to speak with management and give them one more try at making it right. Diagnosing and repairing brakes should be a fairly easy job for a trained mechanic. Make sure that you are using top quality parts and are following correct procedures. If you do not feel comfortable going back to the same shop, have a certified mechanic, such as one from YourMechanic, come to your home or office to diagnose and repair your brake issue.
Read Full Q/A … : Brake pads replacement
abs light on brake line broke have been replace I bleed brake line but brake pad still go to the floor now wheels lock up
ANSWER : Hello. If the brake pedal is going to the floor then that means that it is not building pressure. If the brake system has been fully bled and there is no air in it then most of the time it is a bad master cylinder or it can be caused by a bad ABS module. If the brake fluid was low and if air got into the system then the only way to properly bleed it is with a scan tool that would allow you to open and close the valves in the ABS unit. Air gets trapped in these easily if the brake fluid gets low. This can also explain why the brakes are locking up. I would usually use my scan tool to bleed the system out first before going any further. I would also scan the brake control module to see what it is reading as a fault. If there is no air in the system and if there is no prominent code then I would replace the master cylinder first. If you want to check out why your brakes are locking up, consider YourMechanic, as a certified mechanic can come to your home or office to diagnose and repair this.
Read Full Q/A … : Brake pads replacement
Rear brake job
ANSWER : Hello, thank you for writing in. These situations are understandably questionable. The service providers at a lot of common oil changing and tire repair centers will quote you for a variety of things that can be updated. This does not always mean you are in dire need for more repairs. If braking seems to be harder, spongy, or takes longer, then you have reason to be concerned. Otherwise, you should check the amount of brake pad material left on the calipers. This can be visually inspected without too much trouble. Remove the wheel and physically measure the amount left, compare them to your vehicle specifications. It is a little early to worry about brake fluid or the rotors. However if the brake fluid is low, the rotors are warped from a hard stop, or there are obvious issues you should look into the system further. Only further inspection will confirm or deny the recommendations. For a second inspection, contact our service department to schedule an appointment.
Read Full Q/A … : Brake pads replacement
