The OEM part number for the driver side (left) headlamp assembly that contains the adjusting mechanism is 55156351AK. The adjusting mechanism is not vended separately. The OEM assembly is about $300 and the aftermarket assembly (sold on Amazon for instance) is $100. You can also obtain an OEM used headlamp assembly by searching at Car-Part.com. Given the availability of a new aftermarket part at $100, I would not recommend spending more than $50 max on a used one and that would have to be in very good condition to make it worth it. If you want the headlight assembly replaced and adjusted by a certified Mechanic, dispatched by YourMechanic right to your location, please request headlight assembly replacement and the responding certified mechanic will get this taken care of for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
At Diode Dynamics, we offer LED upgrades for your Grand Cherokee from bumper to bumper. LEDs are a great way to increase nighttime visibility and you can find our most popular LED bulb replacements for your switchback LED halos, backup bulbs, and rear turn signal bulbs for your Grand Cherokee below.
Open the bonnet and look at the back of the headlight casing, on most models there will be two adjustment screws/bolts on the rear or top of each headlight-locate them and grab the right tool in order to turn them (check the owner`s manual to be sure they`re the right ones).
The top of the brightest part of your headlight beam should be right at the center of your plus marking, or just below. If that is not the case, grab your torx screwdriver, locate your vertical adjustment screw, and adjust either clockwise or counter-clockwise, depending on the direction you need the beam to move.
As you stand in the front of the car, have the assistant turn the headlights off. Next, put the dark cloth or cardboard over one headlight, and have the assistant turn the headlights on. Find the adjusting screw and turn the screws slowly clockwise to raise the height of the lights or counterclockwise to lower them.
LED headlights are the future and owners of the Jeep Wrangler are lucky enough to have a set of direct fit LED headlights for their Wrangler! There are two different sets of LED headlights for you to choose from, with a pair of standard LED headlights or a pair of switchback LED headlights.
Look at the beam pattern, and if it`s a yellow color, it has a typical power uptime that tends to be a halogen bulb. If you turn on your headlights and it flashes for a second, then over time (about seven to 10 seconds peak performance and tends to be white in color), that tends to be HID.
All vehicles fitted with halogen headlight bulbs from the factory are suitable for LED conversion. The main advantage is a massive increase in road illumination and therefore improved safety when driving at night. The kit I used features CREE LED bulbs that have an output of 3,200 lumens.
Yes, and it`s a great idea since old-school headlights are just awful compared to their modern cousins. LED and halogen options are easy-to-install upgrades that often plug right in. These Bright Driver headlights are from Detroit Speed, but it looks like they no longer offer them.
To adjust the beam height of your car`s headlights, locate the adjustment screws or levers on the back of the headlight assembly. Once you have these, you will need to work on raising the beam of your car`s headlights. To raise the beam, turn the top adjustment screw or lever clockwise.
Screw the new adjuster into the headlight assembly.
Just slide the new screw into the slot on the headlight assembly. If you removed the plastic cap, put it in first. It has a hole in the center for the screw. Then, rotate the screw clockwise with a Phillips screwdriver to lock it in place.
Vehicles have an adjustment screw or bolt on the headlight assembly for adjusting headlight height, and some also have a screw for horizontal aim. Some vehicles also have a bubble level to help with adjustments.
Over time, the inert gas within the halogen bulb creates a discoloring film (brown or gray). This builds up on the inside of the bulb and dims the light output. Replacing the bulb is generally the only option here. Bad Alternator: Another very common reason to see dim headlights is a failing alternator.
How Do Your Headlights Become Misaligned. There are a few factors which could affect the alignment of your headlights. A common one is that when you drive over speed bumps, uneven surfaces and general potholes in the road, it can throw your headlight aim off. Small impacts or hits can also cause this issue.
Turn the lights off and use a screwdriver to turn the screws until the headlight is at the level you require. Turn your headlights back on to see if further adjustment is required. There should be a screw to adjust the lamp vertically and another screw to align it horizontally. Do each adjustment one at a time.
Open the hood of your Jeep Grand Cherokee. Lift the headlamp covers to expose the alignment screws on the headlamp. Use the Phillips screwdriver, Torx tool head, or Allen wrench to rotate the alignment screws. You should adjust the headlight beam to be approximately three feet above the ground.
Size. While LED headlights are typically more compact than HID headlights, you`ll need to purchase a conversion kit before installing either option if you`re switching from halogen bulbs.
Changing a halogen bulb is very easy. In order to save on your energy costs, you can replace a halogen bulb directly with an LED bulb. In addition, LED lights last on average around 25 times longer than a halogen bulb. There are various LED lamps that are suitable for replacing halogen lighting.
You can, but you`ll need to make sure they aren`t too bright for other drivers. There are some significant benefits to choosing LED bulbs — they last much longer than traditional bulbs and they use a lot less energy, so many drivers want to take advantage of those benefits.
LED bulbs are more energy-efficient than xenon bulbs and last up to 25 times longer. LED bulbs also produce a much brighter, whiter light than xenon bulbs, and they are much safer as they produce very little heat. LED bulbs are also more cost-effective in the long run, as they require less electricity to run.
A bulb running 55W will usually last about half as long as a bulb running 35W. Brightness: 35W bulbs driven by a true 35W ballast will provide at least 3200 lumens. This is over double the brightness of a factory halogen bulb, and plenty of light for night-time driving.
One reason xenon lights have gained in popularity is their extreme brightness. It`s often brighter than both an LED light and a standard headlight. These brighter headlights do come with a trade-off, though. They use much more energy than LED light.
HID and halogen lights are not interchangeable, as the lights require separate bulbs. Cars and vans that come equipped with high and low beam functions generally contain two pairs of headlight bulbs. However, headlights are available that can be switched between high and low functions.
The reality is that Xenon bulbs are really no more difficult to change than any other type of bulb. Many people believe this myth, and end up paying a small fortune to their dealer to do the job for them, but Xenon bulbs can be replaced in much the same way as a standard halogen bulb.
An LED light does not require a ballast because it uses a component called a “driver” to regulate the power going into the bulb.