Why won’t the screen on the driver information center will not return to the original screen?
The driver information center screen will not return to its original setting. Why?
My car has 5700 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Most driver information systems should have a back button of some sort. If you are pressing the back button and nothing is happening, it is possible that your driver information center could be malfunctioning. If this is the case, I would recommend visiting your local dealership to have it diagnosed as they have the proper testing equipment for vehicle features such as this. It is possible that the whole unit may require replacement for the system to work properly. You may also try turning the vehicle off and restarting it to see if it will automatically reset to the home screen.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
Under certain conditions, an error in the vehicles` engine control module (ECM) software. can cause data used by the ECM to become corrupted. When this occurs, the ECM may. send a signal disabling the engine`s fuel injectors.
The most common reasons a Chevrolet Malibu won`t start are a dead battery, an alternator problem, or failed starter.
General Motors. Includes Cadillac, Chevrolet, Buick, and GMC vehicles. Press the home and fast-forward buttons for at least 10 seconds. Press the Onstar call button, then hang up.
A cracked touch screen is one of the main reasons that lead to an unresponsive car stereo screen. Check out for visible damages. If the screen has cracks or visible damage, you probably need to repair it. Sometimes, even minute scratches can lead to a faulty touch screen for your car stereo.
To solve this problem, you`ll need to make sure the battery is fully charged or replace it if it`s bad. Bad Electrical Connection: Occasionally, an electrical connector or wire will work itself loose. If the problem is with the electrical wires connecting your MyLink, you can splice them or tighten the connectors.
Most likely the battery was disconnected. There may be a code and the info on how to reset it in the owners manual. If you can`t find it you will have to take it to the dealer and have them reset it. 16 people think this is helpful.
The myChevrolet Mobile App† enables you to use your smartphone to interact with your vehicle from wherever you are. You can remote start, unlock and lock your vehicle, view your fuel life and tire pressure and more on properly equipped vehicles.
A malfunction in the power source of the car can also cause the infotainment system to fail. Some of the common reasons why the infotainment system won`t turn on because of the power source failure include blown car fuse, wiring issues, blown valves or lack of power to operate the system.
Conversely, shopping for and installing aftermarket infotainment systems can also be a possibility, though it will come at a cost. Most infotainment systems found in vehicles are only compatible with tech made by or specifically for the automaker. However, some are open to working with aftermarket upgrades.
First, long press the power button for a few seconds. Next, open the menu tab. From here, select “Factory Reset.” Now, wait till the factory reset is complete and the car stereo turns on again.
Here are a few troubleshooting steps you can take to fix the issue with your car`s touch screen: Clean your touchscreen. Reboot the touchscreen by turning it off and back on again. Recalibrate the screen from the settings menu.
Key Points. The 2017 Chevrolet Malibu`s leading problem has to do with loss of engine power owing to fidgety computer control modules. “Shift to Park” message may pop on at random, draining batteries overnight. The 2017 Malibu`s most concerning recall has to do with a potential fracture in the fuel pump flange.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Why won’t the screen on the driver information center will not return to the original screen?
ANSWER : Most driver information systems should have a back button of some sort. If you are pressing the back button and nothing is happening, it is possible that your driver information center could be malfunctioning. If this is the case, I would recommend visiting your local dealership to have it diagnosed as they have the proper testing equipment for vehicle features such as this. It is possible that the whole unit may require replacement for the system to work properly. You may also try turning the vehicle off and restarting it to see if it will automatically reset to the home screen.
How do I use the Blank Display feature in the driver information center (DIC)?
ANSWER : The Blank Display feature in the driver information center (DIC) allows you to select a blank display for the DIC. This can help keep a driver from being distracted, or make for a cleaner display. To set the Blank Display feature, press the MENU button until the DIC displays Trip/Fuel Information Menu, then use the toggle buttons to select Blank Display.
How do I use the Fuel Range feature in the driver information center (DIC)?
ANSWER : The Fuel Range feature in the driver information center (DIC) displays approximately how many miles you can drive your vehicle before you next need to refuel. To access the Fuel Range feature, press the MENU button until the DIC displays Trip/Fuel Information Menu, then use the toggle arrows to select Fuel Range.
How do I use the Driver Information Center?
ANSWER : A small screen that is located at the bottom of the tachometer on the instrument panel is called the Driver Information Center, DIC for short. This system allows the driver to select what data is being displayed in front of the driver. Some vehicles have controls for the DIC next to the instrument panel in the form of 4 buttons stacked vertically. Others simply rely on the stem that also resets the trip odometer. The stem is located in the instrument cluster.
If your vehicle has DIC buttons, then there are 4 buttons that make up the DIC controls. From top to bottom, there is:
A button with a road depicted on it, used to switch between:
The odometer, which depicts total mileage of the vehicle.
The trip odometer, which can be reset at any time to track mileage for one trip.
Average fuel economy, which can also be reset to track economy for a single trip.
A timer.
Temperature of the transmission.
Overall fuel use, which can be reset as well.
Current fuel economy.
A digital speedometer.
When one of these items is selected, the screen will also display the direction the truck is facing, via the compass, and the temperature.
A button with a car depicted on it next to a large letter ‘i’. Pressing this will select between:
Air pressure in the tires.
Life of the oil, which can monitor the amount of stress the engine oil endures between changes.
Oil pressure.
Standard and Metric numbers for information displays.
Compass zone, which can be changed depending on the truck’s location.
Trailer brake control, which is useful for towing.
Compass calibration info, to keep the compass precise.
Battery voltage.
Hours of engine use, which cannot be reset.
A button with two boxes depicted on it in which one box contains a check mark. This is the customization menu button that allows the driver to select between the custom settings in their truck.
A button with a large “check” mark on it. This resets things like the trip odometer or the average fuel economy.
The stem that controls the odometer can also be used to change the language that the displays use. English, French, and Spanish are available.
If your vehicle does not have DIC buttons by the instrument panel, then the stem by the odometer, mounted to the instrument panel itself, can be used to change what the screens display:
Pressing the stem allows the driver to switch between the various numbers that can be displayed. These numbers are:
The odometer
The trip odometer
Temperature of the transmission
Trailer brake system
Speedometer
Battery voltage
Oil pressure
Compass zone
Compass calibration info
Life of engine oil
How do I use the Digital Speedometer feature in the driver information center (DIC)?
ANSWER : The Digital Speedometer feature in the driver information center (DIC) allows the speedometer to be displayed in digital format through the DIC. To view the Digital Speedometer, press the MENU button until the DIC displays Trip/Fuel Information Menu, then use the toggle buttons to select Digital Speedometer.
How do I use the Average Vehicle Speed feature in the driver information center (DIC)?
ANSWER : The Average Vehicle Speed feature in the driver information center (DIC) allows you to see the average speed at which you have been driving your vehicle. This feature can be reset at any point. To view the Average Vehicle Speed feature, or to reset it, only takes a few steps:
1. Press the MENU button until the DIC displays Trip/Fuel Information Menu.
2. Use the toggle buttons to select Average Vehicle Speed.
3. When in the Average Vehicle Speed feature, press the SET/CLR button to reset.
How do I toggle in the driver information center (DIC)?
ANSWER : When using the driver information center (DIC), you have to toggle between options. Doing so is very easy, and makes the DIC an easy feature to use. To toggle in the DIC, simply press the up or down arrow buttons on the control center.
How do I use the Compass feature in the driver information center (DIC)?
ANSWER : The Compass feature in the driver information center (DIC) allows you to have a compass displayed on the DIC. To access the Compass feature, press the MENU button until the DIC displays Vehicle Information Menu, then use the toggle buttons to select Compass.
