How do I decline an incoming call?

Touch SETTINGS, then VEHICLE. Select DRIVER ASSIST SYSTEM SETUP, and then touch DRIVER ATTENTION MONITOR. Choose either TACTILE AND AUDIBLE ALERT; TACTILE ALERT; or OFF to disable those alerts entirely.

Use your phone settings to turn Bluetooth® on. Next, locate the Settings button on the Honda Display Audio system and look through the options in the menu to connect to Bluetooth®. Press the Phone icon on the HandsFreeLink® system and allow the system to recognize your smartphone.

The possible cause could be the variable valve timing control (VTC) actuator is defective. Replace the VTC actuator. This procedure does not require the complete removal of the cam chain and associated parts, so repair time is shorter.

Select SETTINGS, then VEHICLE. You will need to select DRIVER ASSIST SYSTEM SETUP and then tap DRIVER ATTENTION MONITOR. The options are TACTILE AND AUDIBLE ALERT, TACTILE ALERT, or OFF for complete removal of those alerts.

While your car is in park, but running, go to “Settings” and then “Phone” on your Display Audio system. You should then be able to choose the Bluetooth® Device List. Your phone will either show up, or you will have to add it by hitting “Add Bluetooth® Device”. (Be sure that the Bluetooth® on your phone is enabled).

New for 2011

CR-V trims have been upgraded with Rear View Camera, Bluetooth Technology, and Navigation System as standard equipment this year.

If your car sounds louder than usual or you hear an unusually loud roaring noise when you start the engine, the problem could be with the exhaust system. Other symptoms like smoke in the cabin, rattling sound, excessive vibrations or loss of power can also occur.

Low Transmission Fluid: For both manual and automatic transmissions, the primary cause for whining when in gear is low transmission fluid. If the fluid is too low, then the internal components of the transmission are not lubricated properly.

When the Driver Attention Monitor is activated, the driver is first alerted by a coffee cup icon and a 4-level bar graph that is displayed on the MID below the speedometer and tachometer.

This feature uses an angle sensor to measure the degree of steering-wheel corrections by the driver to maintain a proper lane position. If it senses too much correction activity, it will notify the driver to take a break.

Driver Attention Warning monitors the driver`s eye position and head movements for signs of fatigue or inattentiveness while driving, then alerts them when they appear to be tired or distracted.

Intelligent Driver Alertness (I-DA) determines driver drowsiness or reduced attention based on changes in smoothness (roughness) of steering input by the driver. Using the steering angle sensors, the system calculates the roughness of steering input patterns by the driver, based on the steering angle.

The idle-stop function may not be desirable in certain traffic conditions, so the driver has the opportunity to easily switch off the system with a button located near the shift lever, identified by the letter “A” surrounded by a circular arrow.

Use the radio dial to scroll down until you see “System Clear”; Then select “Bluetooth Setup”; Scroll down once more until you reach “Delete Device”; Select this option and select “Yes” on the confirmation prompt to remove the device.

Yes, Bluetooth can be hacked. While using this technology has offered a lot of creature comforts, it has also exposed people to cyberattacks. Almost all devices are Bluetooth enabled—from smartphones to cars.

Muffler Delete is the process of removing the muffler from the exhaust system at whole in a vehicle or automobile. Most consumers want a quiet non-disturbed ride in their vehicles.

Choose phone setup and press the button on the center knob. Choose connection and press the button. Choose delete a phone.

Press and release the Talk button. After the beep, say “Phone setup. “ The HFL response is “Phone setup options are status, pair, edit, delete, and list.

Since up to six phones can be paired to your vehicle`s Bluetooth^® HandsFreeLink^® system, you might want to change which one is active at any given time. By default, the last phone connected to the system will have priority until you change to another one.

Trim levels with remote start for the CR-V include the EX, EX-L, and Touring.

Remote Start with HondaLink

This app, when used with a Remote subscription, allows you to start your vehicle with your phone from anywhere. You can also get notifications on your phone when your alarm is triggered, get your vehicle`s location using Find My Car, or send voice commands to your vehicle using Amazon Alexa.

Bluetooth came standard on all models from 2012 on, but as you`re shopping, keep in mind that earlier models with Bluetooth may not have Bluetooth audio streaming, only hands-free phone capabilities.

Honda Information Center – Bluetooth® HandsFreeLink® Phone Pairing.

The problem: Drivers may note a vibration at highway speeds due to the driveshaft and rear dampening support system not adequately absorbing the vehicle`s vibration. Corrective action: Dealers will replace the rear differential mounts and driveshaft in affected Honda CR-V vehicles.