How do I customize the Vehicle Locator Lights?
How do I customize the Vehicle Locator Lights?
Experienced mechanics share their insights in answering this question :
The vehicle locator lights can be turned on or off with just a few steps:
1. Turn on the infotainment system.
2. Press the CONFIG button to select the Configuration Settings menu.
3. Rotate the MENU/SELECT knob to Vehicle Settings, then press the knob to select.
4. Rotate the MENU/SELECT knob to Lighting, then press the knob to select.
5. Rotate the MENU/SELECT knob to Vehicle Locator Lights, then press the knob to select.
6. Use the MENU/SELECT knob to choose between On and Off.
1. Turn on the infotainment system.
2. Press the CONFIG button to select the Configuration Settings menu.
3. Rotate the MENU/SELECT knob to Vehicle Settings, then press the knob to select.
4. Rotate the MENU/SELECT knob to Lighting, then press the knob to select.
5. Rotate the MENU/SELECT knob to Vehicle Locator Lights, then press the knob to select.
6. Use the MENU/SELECT knob to choose between On and Off.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
This function allows to locate the vehicle, e.g., in weak lighting conditions using the remote control. The headlights come on and the turn lights flash for 10 seconds. Press.
Vehicle Locator Lights.
This feature will flash the exterior lamps and allows some of the exterior lamps and most of the interior lamps to turn on briefly when on the Remote Keyless Entry (RKE) transmitter is pressed to locate the vehicle.
The Vehicle Locator Light option is how you disable the reverse lights. With it off, no reverse lights come on; with it on the reverse lights flash when you hit unlock.
There are two types of headlights—low beam and high beam. These lights allow the driver to see the roadway in the dark, while also signaling to other motorists that a car is present.
When the Unlocked Door Anti Lock Out feature is turned on, then the driver door cannot be locked when it is open. When the feature is turned off, the driver door can be locked when open, and will set the lock on a delay after the door is closed. Turning the feature on or off is easy: Turn on the infotainment system.
Chevy MyLink is designed to create a seamless sync between your Chevy entertainment system and your smartphone via Android Auto™ or Apple Carplay® or so you can enjoy streaming options and your favorite apps at your fingertips! You can use your smartphone synced with MyLink to access: A vast app library.
What is the ESP® warning light on a Mercedes-Benz? The Mercedes-Benz ESP® warning light is there to warn you that either ESP® is actively working to stabilize your vehicle (when flashing), or that the system is disabled (when the light stays on).
Cameras and sensor systems in the vehicle detect other road users, powerful computers evaluate the data plus digital navigation maps in milliseconds and give the headlamps the commands for best possible adaption of the light distribution in all situations.
Parking lights are sometimes referred to as sidelights. They are not headlights but do appear outside of them and are located at the front of the vehicle. Some cars have a similar pair of lights located at the rear of their vehicle, though those should not be confused with brake lights.
Passive Unlocking — Determine which doors unlock upon the first press of the button on the driver`s door. Remote Door Unlock — Changes which doors unlock when you use the key fob Unlock button. Remote Left in Vehicle Alert — Horn chirps if you accidentally leave your key fob in the vehicle after exiting.
It is an added security feature that is used to set up all functions. The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
Tail Lights
These lights are positioned between the back axle and must have a clear or red lens with a red light. They are usually mounted with a stainless steel bumper. You can choose between LED or incandescent lights.
The traction control system light should illuminate for 1 to 2 seconds and then go out as the vehicle starts and begins to run. If the light stays on, it either means that the system is deactivated, or there is a problem in the traction control system.
Purpose of clearance lights on large pickup trucks
These amber-colored lights have a major use to help you out as you drive. The first purpose of clearance lights is to alert drivers to a larger truck`s presence on the road.
Purpose of clearance lights on large pickup trucks
These amber-colored lights have a major use to help you out as you drive. The first purpose of clearance lights is to alert drivers to a larger truck`s presence on the road.
If it has a GVWR over 8,500 pounds, then it counts as a heavy-duty truck even if the truck itself weighs under 10,000 pounds. For example, the Chevrolet Silverado 1500 is a light-duty pickup truck. The Silverado 2500HD and 3500HD are heavy-duty pickup trucks.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Abs light, emergency brake light, steering wheel assist light, engine light, EPC light, traction control light
ANSWER : Hello, thank you for writing in. The vehicle does utilize a lot of the same sensors for these systems. Are there any other codes that are coming up when this code appears? If so you will want to take these into consideration when processing the repair and making a diagnosis. The module may be bad, and replacing it should fix the problem. The lights should turn off once the main computer recognizes the new module and the sensors sync up. If you believe the sensors need to be cleaned you may do so. Do as minimal as possible to make sure you are not damaging the sensor or disrupting the wiring inside. A bad connection would make the lights stay on. With so many lights that are effected by the module being illuminated, the module is likely bad or does not have a connection. Check the connection first and then resort to replacing the unit. For more help with these electrical tests, contact our service department.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
No dash lights, back right tail light is out, no parking lights. Brake lights work though as does head lights.
ANSWER : Hi there. In many cases, when you have electrical problems like you’re describing, it’s caused by multiple electrical component failure. It’s likely that a few electrical relays are not working; especially if you have systems that utilize the same components (such as your brake light and tail lights). I would recommend having a professional mobile mechanic come to your location to complete an electrical problems inspection first, so they can pinpoint what is damaged and recommend the right repairs.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
2012 equinox reduced power light engine light and traction light came on. Lost a lot of power got home and all light except engine
ANSWER : Your car has what is called a "safe mode" that will be engaged by the computer when it detects that something critical has gone wrong related to any of the major components in your engine chassis or power train. This may be related to a number of things, most of which should have been registered in the computer when the check engine light came on. I recommend having an expert from YourMechanic come to your location to inspect your check engine light and diagnose any codes registered by your vehicle’s computer.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
Brake lights are not working. replaced brake light swtch still no brake lights. the third brake light the connection was melted at
ANSWER : The first thing to do is to repair third brake light and replace the brake light fuse and then see if the third brake lights work and the lower lights start working? If only the 3rd brake light starts working then you may need a further checks on the turn signal flasher or switch could be bad.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
Okay so when I turn my lights on at night my brake lights do not work, when I don’t have my lights on they work fine.
ANSWER : Hi there. Based on your inquiry, it’s highly probable that you have a damaged light switch or some electrical fault inside the turn signal relay. However, it’s also possible that the brake switch above the brake pedal could also be the source of your problem. Due to the fact that multiple electrical components might be causing this issue, it’s a smart idea to first have a professional mobile mechanic complete a brake lights are not working inspection, so they can determine what’s causing all of these issues and recommend the right repairs.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
How do I customize the Vehicle Locator Lights?
ANSWER : The vehicle locator lights can be turned on or off with just a few steps:
1. Turn on the infotainment system.
2. Press the CONFIG button to select the Configuration Settings menu.
3. Rotate the MENU/SELECT knob to Vehicle Settings, then press the knob to select.
4. Rotate the MENU/SELECT knob to Lighting, then press the knob to select.
5. Rotate the MENU/SELECT knob to Vehicle Locator Lights, then press the knob to select.
6. Use the MENU/SELECT knob to choose between On and Off.
1. Turn on the infotainment system.
2. Press the CONFIG button to select the Configuration Settings menu.
3. Rotate the MENU/SELECT knob to Vehicle Settings, then press the knob to select.
4. Rotate the MENU/SELECT knob to Lighting, then press the knob to select.
5. Rotate the MENU/SELECT knob to Vehicle Locator Lights, then press the knob to select.
6. Use the MENU/SELECT knob to choose between On and Off.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
signals, daytime running lights are not working, park brake light on dash is on steady and chime is dinging steady 4×4 wont engage
ANSWER : This is likely a brake light switch problem. I would suggest testing the brake light switch which should be located down by the brake pedal. This may also be a computer problem as well as indicated by the other lights on in the dash. I would recommend having an expert from YourMechanic come to your home to possibly replace the brake light switch and diagnose with a scanning tool which will download useful data from the truck’s computer indicating what specifically the problem may be.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
First, the fuse 19 keeps blowing. When I hit the brake pedal my dash lights up. The third brake light acts like a running light.
ANSWER : Hi there. Check the wiring on the vehicle to the tail and brake lights. There is a cross short that is causing the lights to blow the fuses and make the tail lights brighter than normal. If you need further assistance with your electrical issues, then seek out a professional, such as one from Your Mechanic, to help you.
Read Full Q/A … : How do I customize the Vehicle Locator Lights?
