Car won’t turn over

ANSWER : Hello there. The charging system on the car may not be charging the battery as you drive and the systems that keep the engine running are priority so the engine will stay running until the voltage drops below about 9 volts but the lighting and some other accessories may cut off above this voltage first. You should have the charging system tested to see if the alternator needs to be replaced.

ANSWER : Your probably correct, it sounds as though your battery is done. But it also sounds like you have charging system issues. I’m not sure that fixing your battery and charging system will solve the problem with the car shutting off, but it’s possible that it will and it’s a darned good place to start. By contacting Your Mechanic, you can have a technician come to your home or office to check out your car and help you figure out what to do next.

ANSWER : Hi there. The symptoms you’re describing with your boyfriend’s 2002 Grand Cherokee appear to be related to a broken or worn out ignition switch or relay. The ignition switch on the inside of the steering column is attached to multiple electronic connections that send signals to a relay box; which in turn, sends the signal to the individual components. The issue could be related to the ignition switch, the relay, or any of the components in between. If you want to have the fault pinpointed in person, I would have this starting issue inspected by a trained professional to ensure that the correct repair is made.

ANSWER : A possibility is a faulty ignition switch. If the switch opens after the car starts, the engine will shut off. But, that is just a possibility and a diagnostic would have to be performed to rule that in or out. Be sure you have a fully charged battery that passes a load test. Starters motors can display intermittent operation if they are faulty. With a fully charged battery, if the starter motor does not run that signifies an electrical problem in the starter circuit (includes the ignition switch) or a problem with the starter motor itself. If there is power to the starter motor and yet it doesn’t run, the starter is condemned and replaced. Alternatively, if there is no power to the starter, or there is a big voltage drop anywhere on the circuit to the starter, then the circuit has to be traced until the fault in the circuit is found. Notably, faults can include high resistances, due to corrosion, wire strand breaks, or loose terminals, which can only be diagnosed using a voltage drop test. Regardless of what the underlying cause of the no start condition is, if you desire that a certified mechanic resolve this promptly, please simply request a no start diagnostic and the responding mechanic will get it diagnosed and repaired for you. Please let us know if you have further concerns or questions as we are always here to help you.

ANSWER : The steering lock may not be unlocking either due to a faulty ignition lock housing or more commonly as the cars age a faulty spring at the steering wheel on the under side of the column. If the ignition lock housing is the issue the housing can be replaced. It s a bit tricky as the mounting bolt has break off heads and generally need to be driven out with a punch. If the lock is not disengaging because of a faulty spring on the ignition lock many owners have had the spring removed by having it drilled out of the housing. However, removing the spring may permanently disable the steering lock. The last option would be to replace the steering column. You may want to enlist the help of a mechanic who can recommend the proper repair for your situation.

ANSWER : If your vehicle was not starting but was turning over, I would have advised against the starter replacement. If the engine will turn over, the starter is doing its job. If you have an aftermarket security system on your vehicle, are unable to start your car, and are unable to lock and unlock the doors, I would recommend having the aftermarket security system inspected. The best place to have this done would be the place that it was originally installed as they would have the best knowledge of the system. This could be related to wiring, control modules, or other related components. Once the security system has been inspected, the repair procedure will be more clear.

ANSWER : Hi there. It is quite possible that the starting issue you’re currently having with your Ford Focus is not related to the starter replacement. However, it could be due to might be due to your battery problem. When your battery does not have enough power to engage the starter, it also impacts other important systems critical to maintaining ignition, ranging from the ignition coils to fuel system components. It might be a good idea to have a professional mobile mechanic from our team come to your location to compete a car starts then dies inspection, so they can correctly diagnose this issue and ensure the right repairs are made.

ANSWER : Hi there. This type of electrical glitch can be very difficult to pinpoint or diagnose without a physical inspection. However, in general, the most common causes of this issue is an exposed electrical wire within the ignition system. It is best to have a professional mechanic complete an electrical problems inspection first in order to correctly diagnose and resolve this issue.