What does the trip information display do?

What does the trip information display do?
Experienced mechanics share their insights in answering this question :
Your car is equipped with a screen that displays a wide range of different information pertinent to your trip called the trip information display. The information here ranges from the outside temperature to the average fuel mileage and more. To operate the system, just follow these steps:

Turn the ignition to on.
Press the display button on the right side of the steering wheel.
Cycle through the different fields by pressing the display button.

Tip

The trip information display will only work with the ignition in the on position or the engine running.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

Odometer and trip meter Odometer:Displays the total distance that the vehicle has been driven Trip meter:Displays the distance the vehicle has been driven since the meter was last reset.
The Toyota Multi-Information Display (MID) is a screen located in the instrument cluster that provides the driver with important information such as fuel economy, vehicle speed, and trip information. Depending on your Toyota model and year, you may be able to customize the information that is displayed on the MID.
Press the TRIP button until the specific trip you want to clear is selected and shown on your odometer`s display area. Push and hold the TRIP button on the dashboard. While holding the button, turn the car`s ignition to the second position.
Put your key in the ignition and turn it to position one, which is the position right before starting the car. Push and hold the trip meter reset button on the dashboard, then turn the key to position two. Keep holding the odometer button for 10 seconds. The light should then flash, beep, and then go out.
A trip computer is a computer fitted to some cars; most modern trip computers record, calculate, and display the distance travelled, the average speed, the average fuel consumption, and real-time fuel consumption.
Trip Odometer: Registers the distance you have traveled on an individual trip. Trip Timer: Keeps track of how long each trip takes. The timer stops when you turn your vehicle off and restarts when you restart your vehicle. Average Fuel: Shows the average fuel economy for a given trip.
The Technical Information System or TIS is your service support source for all Toyota produced vehicles marketed in North America.
The Trip 1 and Trip 2 feature in the driver information center (DIC) allows you to keep track of how many miles your car has traveled since the last trip odometer reset.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I cant find my owners manual for my 2004 toyota avalon xls and i have a question. I did a trip using trip a for a total of 19.7 mi
ANSWER : Hi there. If I understand your question correctly, you are saying that you completed a driving test; selecting trip "A" for the ride out and trip "B" for the ride back. Once you arrived back home, trip "A" was 39.2, which would be the distance of both individual trips. This is natural if the trip "A" was not deactivated or cleared when you started trip "B". When you begin a "trip" rating, it will continue until you shut off or clear that individual trip. The multiple trip settings is typically used to measure individual distances from one point to another. So, essentially, the trip meter will continue to add miles until it is deactivated; even if a second trip is activated. If you can’t find the owner manual, you can buy a new one from a dealership or even download them online in most cases.

What does the trip information display do?
ANSWER : Your car is equipped with a screen that displays a wide range of different information pertinent to your trip called the trip information display. The information here ranges from the outside temperature to the average fuel mileage and more. To operate the system, just follow these steps:

Turn the ignition to on.
Press the display button on the right side of the steering wheel.
Cycle through the different fields by pressing the display button.

Tip

The trip information display will only work with the ignition in the on position or the engine running.

How do I use Trip 1 and Trip 2 in the driver information center (DIC)?
ANSWER : The Trip 1 and Trip 2 feature in the driver information center (DIC) allows you to keep track of how many miles your car has traveled since the last trip odometer reset. Accessing Trip 1 and Trip 2 is very easy:
1. Press the MENU button until the DIC displays Trip/Fuel Information Menu
2. Use the toggle buttons to scroll to either Trip 1 or Trip 2, then press SET/CLR
3. To clear and reset the current trip odometer, press SET/CLR again.

What information is shown in the information display?
ANSWER : The following information is shown on the information display:

Vehicle mileage (total mileage for the vehicle)
Trip meter A (this can be reset at any point to track mileage)
Trip meter B (this can be reset at any point to track mileage)
Outside temperature
Coolant temperature gauge
Oil life (Maintenance Minder™)
Check Fuel Cap Message (indicates a loose gas cap)
Fuel Gauge

I can adjust the settings in the DIC info panel, but I cannot exit the DIC info panel to return to the informational displays.
ANSWER : Hi there. You can scroll through the areas and the item that you want to have visible like the speedometer or rpm’s, then press the check mark and the system will go to that setting. You cannot back out of the system while driving as the system is made for a display of features while your vehicle is in motion. If you need further assistance with your dashboard messages, then seek out a professional, such as one from Your Mechanic, to help you.

What items can be customized in the multi-information display?
ANSWER : While some of the items displayed can’t be changed (your primary odometer reading, for instance), many others can be customized. Here’s what you can change:

Maintenance Minder (reset or leave alone)
Trip meter (reset or change from elapsed time, fuel economy or range)
Clock (set or adjust)
Clock images (choose how the clock is displayed)
Wallpaper (delete or change wallpaper)
Turn by turn display (on or off)
Language (choose English, Spanish or French)
Temperature (choose how the outside temp is displayed)
Miles/Kilometers (change the unit of measure for your car)
Lighting (choose how long certain lights stay on)
Auto locking (change when the doors lock automatically)
Security relock (change the duration between unlock and auto relock)

How do you use the Maintenance Minder™ with the multi-information display?
ANSWER : Your car’s multi-information display gives you access to a lot of information about your vehicle, including the various services and when they’re due. Here’s how you use the Maintenance Minder™ on your car:

Turn the key to the on position.
Press the menu button
Choose vehicle menu
Choose vehicle information
Press the source button
Press the source button a second time
Choose maintenance info
The oil life should now be displayed as a number ranging from 0 to 100 (%)

How do I view the average fuel economy in the multi-information display?
ANSWER : The average fuel economy shows you the mpg that your vehicle has been averaging while you drive. The average fuel economy is tied to the trip meters, and will be reset when the trip meters are reset. You can access the average fuel economy through the multi-information display by pressing the display button until average fuel economy is shown on the display above the center console.