What does the Service StabiliTrak message mean?

What does the Service StabiliTrak message mean?
Experienced mechanics share their insights in answering this question :
The Service StabiliTrak message can appear in the driver information center (DIC). When the DIC displays this alert, the StabiliTrak system is not properly working, and needs to be serviced. When the StabiliTrak issue is resolved, the alert will go away.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

What is Stabilitrak? Stabilitrak helps you drive in a straight line by monitoring and adjusting the steering, braking, and traction of your vehicle. Using sensors to figure out the position of the steering wheel and tires, this system will check that they match the direction your vehicle is moving.
If you`re getting a service StabiliTrak warning on your Chevy Equinox or Chevy Cruze, then it is signaling some issues that need your attention. The Stabilitrak system is connected to a few different systems, and potential issues that could cause this service light to come on include: E85 Fuel. Active Fuel Management.
The “Service StabiliTrak” warning light indicates a problem with the stability control system; hence, it is not recommended to drive a vehicle while it is illuminated. Particularly when driving in hazardous situations, this technology aids in maintaining the vehicle`s traction and stability.
When this warning indicator light comes on in the dashboard, this could be an indication of several issues such as faulty wheel speed sensors, a faulty steering angle sensor, a faulty rotational speed sensor or a problem with the steering rack.
While your car is typically safe to drive with the traction control light on, you should not drive it under certain conditions. If the traction control light, anti-lock braking system light, and red brake-warning light illuminate, your entire braking system may be affected.
Despite being such a complicated system, Stabilitrak repairs are surprisingly affordable. A typical Stabilitrak repair costs between $80-$200. That`s not bad for a car repair, especially considering how complex these systems can be.
In essence, Stabilitrak can help you stay safer and maintain better control of your GM vehicle during any conditions that may result in loss of control, collision, or even death.
Hard shifting usually occurs from low transmission fluid, which means the metal components inside the transmission are rubbing on each other with a lot of friction. However, in the service stabilitrak situation, it generally has nothing to do with low fluid levels.
Remember that not having traction control does not affect the safety standard of a vehicle unless you are driving on slippery roads or turning corners at high speeds. The truth is no person in their right mind would try to drive that fast around corners.
To turn StabiliTrak/ESC off, select Stability, then press ✔. The StabiliTrak/ESC icon on the DIC will change from On to Off. If TCS was on when StabiliTrak/ESC was turned off, both will turn off and and illuminate. To turn StabiliTrak/ESC back on, select.
To turn StabiliTrak/ESC off, select Stability, then press ✔. The StabiliTrak/ESC icon on the DIC will change from On to Off. If TCS was on when StabiliTrak/ESC was turned off, both will turn off and and illuminate. To turn StabiliTrak/ESC back on, select.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

What does the Service StabiliTrak message mean?
ANSWER : The Service StabiliTrak message can appear in the driver information center (DIC). When the DIC displays this alert, the StabiliTrak system is not properly working, and needs to be serviced. When the StabiliTrak issue is resolved, the alert will go away.

2010 Cadillac SRX Service StabiliTrak message
ANSWER : Hello. If the vehicle is displaying a service message for the traction control system then it has detected an issue with the vehicle’s traction control system. If the vehicle has also been put into a power reduced mode then it is likely that the issue detected is considerable enough to potentially cause harm to the vehicle’s components, and so power reduced mode has been activated to reduce the possibility of damage to any components. If the issue has returned after a check of the ABS system then it is very possible that the two are related. The ABS system provides the signal that the traction control system uses to operate, and can cause symptoms similar to those you are experiencing if an issue occurs. If the light is back on then retrieving the trouble codes will likely shed some light on what the issue could be. As the issue present is affecting engine performance, I would recommend having a professional technician, such as one from YourMechanic, visit your location to diagnose what may be causing your issue.

First the service traction control message came up and after it was the service stabilitrak. Two days later the reduced engine power light came on.
ANSWER : Hi there. There is an issue with the traction control system and it may be active with the loss of power happens. Check the brake system for any loose or damaged wheel speed sensors. The traction control system works when a wheel is spinning differently than another when driving straight. When the system acts up, the computer (ECM) will put the engine into limp mode to stop the vehicle from driving under a slippery condition even there is none. Also, check the computer for any codes to give you a starting location for diagnostics. If you need further assistance with your traction control being active, then seek out a professional, such as one from Your Mechanic, to help you.

Service stabilitrak and service traction control
ANSWER : Hello. The stability control and traction control warning lights can trigger for several reasons. The first step you will want to take will be to have the vehicle scanned for diagnostic troubleshooting codes. This will tell you what about the systems is malfunctioning. The ABS system works hand in hand with the traction control and it may have more to do with the ABS system then the traction control. Due to the lights flashing on and off, you may simply have a loose connection or wire. The service tire monitor is realistically the most important warning. If the tire monitoring system is failing on one or more tires, the traction control and stability control systems will not have the input from that sensor to make calculations. Start by having the vehicle scanned, and use that information to help the diagnosis.

"Service Stabilitrak" has come up on my dash and I do not know what it means?
ANSWER : Hey there. These messages are there to tell you that the main computer has detected an issue with the systems. The warning lights are very general. They can mean the system is malfunctioning, the system has been turned off, or the system is receiving a bad signal.

Due to your traction service light being on as well, there is likely an issue with the system. You are absolutely fine to drive the vehicle. Just know these devices to help control the vehicle in a sliding situation are off, and you will need to drive accordingly if in certain conditions.

The best option is to have a technician look at the system. You may want to attempt to have the vehicle scanned for diagnostic troubleshooting codes. They may give you a better idea of what exactly has failed in the system if you are wanting to perform the repairs at home. The common issues with these systems are a reading from an input sensor, a faulty controller, or a bad connection. All are relatively easy to repair, but may take some time to diagnose. To pinpoint the problem, a certified professional from YourMechanic can assist with a diagnosis of the traction control system so that this can be correctly addressed.

What does the service AdvanceTrac® warning mean in the message center?
ANSWER : AvanceTrac is the electronic stability control (ESC) system used in Ford vehicles. It may also be referred to as “traction control” or “vehicle dynamic control” is other vehicle models. This system monitors the steering stability of the vehicle and engages when skidding has been detected, or the loss of traction.

The AdvanceTrac system counteracts oversteering and understeering by reducing power and/or applying brakes to specific wheels. This is done by the use of electronic sensors that communicate with the Powertrain Control Module (PCM) regarding steering performance and stability in adverse weather conditions. The are several components that are necessary for the AdvanceTrac system to work properly.

Anti-Lock Brake System-When/if the brakes lock up, this may cause a loss of control and the vehicle may slide. The anti-lock brake system prevents this from happening by preventing the brakes from locking up, as well as preventing oversteering and/or understeering when the vehicle starts to slide.

Traction Control System-The traction control system works by reducing engine speed and determining which wheel to apply brake pressure to in order to prevent the vehicle from sliding.

Electronic Sensors-The Powertrain Control Module (PCM) receives information from electronic sensors regarding the rotational speed of each wheel, the horizontal motion of the vehicle, and the vertical motion of the vehicle.

If the “service AdvanceTrac” warning indicator light comes on in the dashboard, this could be an indication of several issues.

A faulty wheel-speed sensor
A faulty steering-angle sensor
A faulty rotational-speed sensor
An issue with the steering rack
Something that is lodged in one of the wheels
The AdvanceTrac system needs to be reprogrammed

If you need assistance diagnosing the service AdvanceTrac warning light, contact a certified techncian for help.

What does the Service Power Steering message mean?
ANSWER : The Service Power Steering message can appear on your driver information center (DIC). When the DIC displays this alert, it means that there is an issue with the power steering system, and the system should be serviced as soon as possible.

What does the Service AC System message mean?
ANSWER : The Service AC System message can appear on your driver information center (DIC). When the DIC displays this alert, then there is an issue with your air conditioning system, and the system needs to be serviced.