What does the Manually Close the Power Liftgate message mean?

What does the Manually Close the Power Liftgate message mean?
Experienced mechanics share their insights in answering this question :
The Manually Close the Power Liftgate message can appear on your driver information center (DIC). When the DIC displays this message, it means that there is something obstructing your trunk and keeping the power liftgate from functioning.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

Manually pushing or pulling the liftgate may activate the system`s obstacle detection feature and stop the power operation or reverse its direction, replicate a strut failure, or damage mechanical components.
Power Liftgates Defined

Essentially, a power liftgate gives a vehicle owner the ability to open their car`s rear door with the push of a button. Said button is installed on the key fob and/or inside the car itself at the front and rear of the vehicle.

A manual liftgate is a bit different from a traditional door, though. The hinges are at the top of the frame (rather than on the side). That means a manual liftgate opens upwards. On each side of a manual liftgate, you`ll find a lift cylinder. The lift cylinders support the liftgate while it`s open.
As long as you`re not slamming it shut, closing it yourself is fine. You may even (every so slightly) lengthen the life of the motors that control the automatic closing this way. But do not try to manually open/close it if the automatic operation is in progress, or you may damage it.
The most common liftgate issues can be traced back to the motor or motor start solenoid. If you hear a clicking noise when the switch is activated, more than likely you have a bad solenoid. Using a small jumper cable, bypass the solenoid by putting direct power to the motor to see if it will run.
Open the liftgate. (On some models, you select the ¾ setting on the liftgate switch to open.) Manually adjust the liftgate to the desired height. Press and hold the button next to the liftgate latch for three seconds.
This feature can be turned on or off with just a few steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed on the instrument panel, then press the OK button. 2. Press the Up/Down buttons until Convenience is displayed, then press the OK button.
Power liftgates can be operated manually, but the process varies depending on the vehicle. In some cases, you don`t need to do anything and can open and close the liftgate manually. However, on many vehicles, you have to disable or override the power liftgate function.
If you look at it in terms of convenience, power liftgates are really helpful, especially if you are someone who frequently uses your vehicle`s cargo or backdoor. The prospect of having to open your vehicle`s rear door without having to put down whatever you are carrying makes it seem really worth it.
As stated, a hands-free liftgate is just a power liftgate with the added feature of not having to use your hands to open your rear door. Much of the conveniences you have with a power liftgate can be found with a hands-free one.
They are not required for floor loaded shipments so long as the individual freight items do not weigh more than 150 pounds each. If the individual freight items weigh more than 150 pounds each a forklift or liftgate is typically required.
For power tailgate

Press the tailgate handle switch and tailgate close button at the same time for more than 3 seconds. (the chime will sound). Close the tailgate manually. Open the tailgate using the tailgate handle switch and allow it to fully open.

According to Charley, “If you don`t have either the sufficient voltage or sufficient time, you`re going to discover that your liftgate batteries are in a low state of charge and, of course, that leads to issues with poor battery life, as well as poor liftgate operation.”
In most cases, the total for having a liftgate replaced will be between $2,000 and $10,000 for an installation, and the removal of the old liftgate may be included in that total depending on the shop you use.
This feature can be turned on or off with just a few steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed on the instrument panel, then press the OK button. 2. Press the Up/Down buttons until Convenience is displayed, then press the OK button.
To leave your car door open without seriously impacting your battery, you`ll need to look at the age of your car and its battery health. . To help prevent the draining, you can either get a new battery or remove your interior lights.
Note: Do not leave the liftgate open when you are driving. This could damage the liftgate and its components.
If you look at it in terms of convenience, power liftgates are really helpful, especially if you are someone who frequently uses your vehicle`s cargo or backdoor. The prospect of having to open your vehicle`s rear door without having to put down whatever you are carrying makes it seem really worth it.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

What does the Manually Close the Power Liftgate message mean?
ANSWER : The Manually Close the Power Liftgate message can appear on your driver information center (DIC). When the DIC displays this message, it means that there is something obstructing your trunk and keeping the power liftgate from functioning.

I am replacing my power brakes booster and need some advice about removing the power unit from the bell crank.
ANSWER : Hi there. When removing the brake booster from a vehicle, you will need to remove the master cylinder and cap off the hydraulic lines. Then go in the cab and remove the pin from the bell crank and unbolt the 4 bolts that hold the booster on. Then remove the booster. Do the opposite to install the booster. If the bell crank pin had a cotter pin to secure it, make sure that you use a new cotter pin. If you need further assistance with removing and installing a brake booster in your vehicle, then seek out a professional, such as one from Your Mechanic, to help you.

My car is having power issues. I get a message that says engine power reduced/ service traction along with headlights flickering and engine cutting out.
ANSWER : Hi there. Check the battery and alternator to the vehicle. With all of the electrical issues that you are having, it sounds as if the battery is not charged and making the engine stall out due to lack power. Check the battery for a 12.6 volt reference and load test the battery. If the battery fails, then replace the battery. If the battery passes, then check the alternator and see if its putting out the full amount of amps. If you need further assistance with electrical issues, then seek out a professional, such as one from Your Mechanic, to help you.

I had a warning message in my 2013 Ford Fusion that the power steering assist failed. I have power steering capability now. Is it safe to drive?
ANSWER : Some 2013 Ford Fusion models are part of a safety recall involving loss of steering assist. Contact your dealer with the Vehicle Identification Number (VIN) or check your VIN number on safercar.gov to verify if this recall applies to your vehicle. Loss of steering assist can be dangerous if you are caught off guard. It would be best to not drive the vehicle. Contact your dealer to have it towed to their location.

What does it mean if the message center shows a warning saying “Sensor blocked see manual?”
ANSWER : Your car has a significant number of sensors that play vital roles in a wide range of different systems. If you see the warning “Sensor blocked see manual” come across your message center, it’s natural to feel a little nervous. Really, it means that the Blind Spot Information system (BLIS) and the Cross Traffic Alert system sensors (they’re tied together) have been blocked by something. You’ll need to remove the blockage before the system will operate correctly.

What does the Service Power Steering message mean?
ANSWER : The Service Power Steering message can appear on your driver information center (DIC). When the DIC displays this alert, it means that there is an issue with the power steering system, and the system should be serviced as soon as possible.

Reduce engine power / check engine light is on
ANSWER : Hi there. Most of the time, reduced engine power is caused by a restriction of fuel, or the throttle body’s inability to efficiently mix air and fuel. This could be caused by a failing mass air flow sensor, EGR valve or other fuel system components. Since the check engine light is on, you should have a professional mechanic complete an inspection at your location to determine what codes are stored and which components require repair. This should resolve your issue.

What does it mean if the “Service power steering” warning is displayed in the message center?
ANSWER : Your car’s Power Steering system is an integral part of the vehicle. While the system can fail and you’ll still have the ability to steer, you’ll find that the wheel is much harder to turn. Obviously, it’s important to have the system serviced and maintained properly. If you see a warning in the message center that reads, “Service power steering,” it means that there’s a condition that has been detected requiring immediate service. Have your car inspected immediately.

Tip

If you see the “Service power steering NOW” warning, you need to take your vehicle immediately to a mechanic.