signs

ABS encircled sign seen on the dashboard
Experienced mechanics share their insights in answering this question :
The anti-lock brake system uses sensors in the wheels and other inputs to help control the wheels from sliding, locking up, and to help control the car under certain driving conditions. Issues with the system could include these sensors, any issue with brake fluid pressure, worn brake pads, and various other components. When the ABS light illuminates, it means there is an issue with the system and the computer has detected it. Thankfully the computer has detected the issue and diagnosing the exact problem will be easier. You need to have the vehicle scanned for diagnostic troubleshooting codes. Once you have the codes, look into the cause and make an appropriate repair.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

Examples include the ABS brakes system, the engine diagnostic controls, the emissions systems, among others. All these systems can cause the check engine light to come on. The reason could be a simple harmless issue or a major complicated issue that can be termed as an emergency.
If both the ABS and the brake system light come on at the same time, your vehicle is no longer safe to drive. This means there is a serious problem with the car`s braking system and continuing to drive puts yourself and others at risk.
When you get this combination of warning lights and symptoms it is typically the result of a battery that has failed. If the battery voltage gets low enough then the check engine light and the brake light can come on as they can no longer function without suitable power.
The ABS warning light is an icon on a vehicle`s dashboard that alerts the driver to a potential problem with the ABS (Anti-lock Braking System). The ABS on a car, truck, or SUV prevents the wheels from locking up when a driver slams on the brake pedal in an emergency situation or on a wet or slippery surface.
A loose gas cap is one of the most common reasons for the check engine light to go on. Check that your gas cap is screwed on securely and that it`s in good condition. If you have a tank of bad gas in the car, your check engine light may come on.
When an issue arises with your vehicle, a corresponding light will illuminate on your dashboard. If the ABS system detects a problem, a fault code will be generated and then stored in the system memory.
The average cost for ABS module replacement is $1174 to $1301. Enter your vehicle`s information to see how much ABS module replacement costs in your local area.
If your brake service warning light is always on, it could be due to a need for parking brake adjustment, worn brake pads, or hydraulic issues. If your brake service warning light turns on when you hit the pedal, it could be due to hydraulic loss on one side of your vehicle or low brake fluid in the master cylinder.
In some cars, a yellow check engine light means there is a problem that needs to be investigated and a red or flashing light means there is a serious problem and you need to stop right away. Your gauges will help you to determine problems like overheating and low oil pressure.
The most common ABS problems occur when sensors become contaminated with debris or metal shavings. Malfunctions also occur when sensor wiring becomes damaged, resulting in intermittent or no continuity.
If the TCS and the ABS warning lights both come on, along with the red main brake warning light, you should not drive the car until the problem has been fixed. Your entire braking system is affected, and may not be able to stop your vehicle when you need it to. Have your vehicle towed to a repair shop.
Can you drive a car with the engine light on? It`s okay to drive for a few miles, but be sure to schedule an inspection of the engine as soon as possible. If the check engine light comes on while you`re driving, don`t panic! Pay attention and see if the car is driving any differently than normal.
The short answer is, “Probably not.” There`s no need to panic, as the reason for the check engine light is to alert you to something that needs attention. Sometimes, the cause of this light is something as minor as a loose gas cap.
In certain cases, depending on the model of vehicle, when the ABS module fails, the brake pedal may become unresponsive. This is an obvious problem, as an unresponsive brake pedal will not stop a vehicle, or will not be able to do so in an adequately safe manner. In most cases, this will happen slowly, over time.
Reason #4: Anti-lock braking (ABS) and traction control components are sensitive to moisture and small particulates from contaminated fluid. We recommend flushing the brake fluid before it has a chance to ruin these expensive brake parts.
If your ABS warning light came on alongside the brake warning light then it is not recommended to drive the vehicle as both brake monitoring systems are experiencing issues and need immediate attention. We recommend towing the vehicle to a shop at this point and avoid driving it.
The ABS module is like most electronic components in your car – it can be damaged by impact, electrical overloads, or extreme temperatures. Under most conditions, though, the ABS module should last the life of your car.
In general, you can still continue driving even if your car`s ABS light is on. This is because your car`s brakes still function as usual and can still slow your vehicle down.
If you happen to be driving when the brake warning light first comes on, carefully pull over in a safe area and turn your car off. The first and easiest thing to check is your emergency brake. If the E-brake is fully released, get out of the car and check your brake fluid level.
How long can you drive with the check engine light on? Once you see the check engine light, it is safe to drive with the light on for 50 to 100 miles. This is because if the issue is with the sensors, then this will buy some time for it to reset, turning the check engine light off.
An illuminated check engine light is the first warning sign that your vehicle needs an oil change. It can activate because the oil is too dirty or when there`s not enough flowing throughout the engine.
Removing a wheel speed sensor will disable ABS—and sometimes, stability control. If your car has a yaw sensor, you can unplug that for results. You can also try simply unplugging the ABS module, though that could adversely affect your car`s braking performance.
Disguised sensors are usually located internally in the wheel hub and usually don`t need to be cleaned because they`re protected from dirt. If you are having a problem with a disguised ABS sensor, you`ll need to take it to a mechanic.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

engine and transmition signs on the dashboard..
ANSWER : Hi there:

The two lights you’re referring to are service light indicators that illuminate when routine service is due or has recently been completed. These service lights can be reset by following instructions listed in the owner manual. If you don’t have this or would prefer somebody to determine if there is still an issue with your Saab, please set up a service light is on inspection and one of our local mechanics can come to your home and complete this service for you.

Read Full Q/A … : signs

Not sure my car have ABS or not 2011 Nissan Sunny
ANSWER : Hello – yes, your Nissan Sunny has Anti-lock Brakes System. It would appear that yours is inoperative, and the ABS light in the dash cluster has burned out, or one or more fuses have blown. Check for blown fuses first. Next, I recommend a brake inspection ASAP performed by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, diagnose this problem, and give you an accurate assessment of damage and cost estimate for repairs.

Read Full Q/A … : signs

Check engine sign on
ANSWER : Most Check Engine Lights are illuminated when an error code is triggered and stored in the ECM. Even if you’ve repaired what was broken or damaged, you still need to clear those codes in order for the light to go away. If you have a professional digital scanner you can complete this on your own. Otherwise, you might need to contact a local mechanic, like one of our professionals at YourMechanic to complete this service for you.

Read Full Q/A … : signs

Airbag & seat belt signs come on and off continually
ANSWER : There is a sensor in the seats of your BMW 545i that signals the computer there is someone in the seat and will turn on or off the passenger air bag. If you have leather seats that are not soft anymore, or you put something in the front seat it may cause the sensor to think someone is in the seat. You may need to have the sensor repaired or the seat repaired to correct the condition. If you need help figuring out how to repair this, a certified technician from YourMechanic can come to your home or office to diagnose these signs.

Read Full Q/A … : signs

(08 f150 4.6L) Truck is cutting off when making a complete stop at red light or stop sign.
ANSWER : Check the Idle Air Control (IAC) valve and see if its dirty or not functioning correctly. I recommend removing the IAC and cleaning it out. If the valve was sticking before, the computer could have caught it and adjusted the idle to accommodate the issue. After having the battery cable off, the computer is in a learning cycle which means that if the IAC is not working properly, the computer will have to relearn and may learn to shut off due to a faulty valve, even though the computer says its good. If you need further assistance with your engine stalling out at stops, then seek out a professional, such as one from Your Mechanic, to help you.

Read Full Q/A … : signs

Brake Fluid Level Insufficient Warning Sign Error
ANSWER : This may suggest that your brake pads are worn and due to be replaced or that you have a leak somewhere in your brake hydraulic system. The brake reservoir has a sensor inside that detects when the brake fluid reaches a certain point which generally indicates that it is time to replace the pads. As your pads wear thinner and thinner over time, the brake lines require more and more brake fluid to maintain the same amount of hydraulic pressure in the brake lines. As a result, the brake fluid level sensor will trigger a warning light indicating that the brake fluid level is low. I would recommend having an expert from YourMechanic come to your location to diagnose your braking system to determine what may be causing this light to come on.

Read Full Q/A … : signs

Airbag & seat belt signs come on and off continually
ANSWER : Hello there,

A few different problems can cause airbags faults such as these. The most common problems are with the seat passenger sensor, wiring, or the seatbelt pretensioner.

The wiring for the seatbelt can be very sensitive and any change can cause faults such as this. I’d suggest having your car looked at by a qualified technician, who will be able to diagnose this electrical issue and perform any repairs that are required.

Read Full Q/A … : signs

Stop at stop sign, give it the gas, it want go, let up, push down agin it goes,the engine does not die.!!!!
ANSWER : What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. This valve is controlled by the vehicle’s computer and will adjust idle speed based upon other measurements such as engine temperature, intake air temperature and electrical system load or voltage. This is also an important function when starting the motor as it allows the motor to run and idle on it’s own once the motor fires. When you accelerate, the engine RPM increases, and as you let off the gas, the RPM slowly returns to the normal idling speed with the help of the idle air control valve making the transition from a higher RPM back down to idle speed while adjusting the air/fuel ratio constantly to allow this to happen smoothly. When the engine RPM drops below the normal range of about 800 RPM, this often times will cause the engine to stall indicating a dirty or faulty idle air control valve. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.

Read Full Q/A … : signs