My idler pulley bolt snapped off on my 98 ford contour, what does the pulley bolt go into so I can get that part
The bolt snapped off from my idler pulley and I need to replace whatever the pulley bolts into in my 98 ford contour. What is this part called?
My car has 108000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
The part is a bracket and due to the age of the car the part is almost undoubtedly no longer available from Ford and there is no aftermarket for this part. The normal practice in a case like this is to simply drill the bolt out, re-thread the hole (with a heli-coil insert if necessary) and the problem is solved. This can sometimes be done without removing the part from the car (compact right angle drills) but even if you have to unbolt a bracket, once you have the bracket off it becomes even easier to just drill it out and thus will be much cheaper to fix what you have, and less time consuming than running around to junkyards trying to find a used part. Repair of broken bolts is no big deal and is a routine occurrence in the field. I would recommend you simply request repair service for the bolt repair and this can be resolved quickly by a mobile mechanic who travels right to your location. If you have further questions or concerns as you decide what to do, do not hesitate to re-contact YourMechanic because we want you to make the most of your repair dollars and help you get the best possible results.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
A broken or seized pulley can quickly lead to a torn belt, or in less serious cases, the belt falling off of the engine. An engine without a belt can quickly run into issues such as overheating and stalling, as it`s the drive belt that allows the engine accessories to function.
Idlers regulate belts that are attached to the crankshaft and generate movement in several unique engine accessories ranging from the air conditioner`s compressor to the steering pump and the alternator.
The bracket that holds the pulley can become damaged. Damage can be caused by vibrations. Since the bracket can no longer hold the pulley in place, the belt can fall off. The good news is pulley brackets are easy to replace.
You can easily drive your vehicle for tens of thousands of kilometres with a bad idler pulley, until the engine components continue to function normally. But, if the engine belt slips then you may lose control of the vehicle while driving.
Hi – a failing idler pulley can certainly keep your alternator from charging properly, resulting in a dead battery, which would prevent the engine from starting of course.
So, how long can you drive with a bad idler pulley? The safety recommendation is not to drive the car at all and take it to a mechanic immediately. You should be concerned if the vehicle makes squeaking or rattling noises. The car can still run for months or break after a few days.
Signs of a Worn Idler
A squeaking noise often means that the bearings or surface of the idler pulley are worn. The engine warning light may illuminate on your dashboard. Your power steering may not work. Your engine may often overheat.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My idler pulley bolt snapped off on my 98 ford contour, what does the pulley bolt go into so I can get that part
ANSWER : The part is a bracket and due to the age of the car the part is almost undoubtedly no longer available from Ford and there is no aftermarket for this part. The normal practice in a case like this is to simply drill the bolt out, re-thread the hole (with a heli-coil insert if necessary) and the problem is solved. This can sometimes be done without removing the part from the car (compact right angle drills) but even if you have to unbolt a bracket, once you have the bracket off it becomes even easier to just drill it out and thus will be much cheaper to fix what you have, and less time consuming than running around to junkyards trying to find a used part. Repair of broken bolts is no big deal and is a routine occurrence in the field. I would recommend you simply request repair service for the bolt repair and this can be resolved quickly by a mobile mechanic who travels right to your location. If you have further questions or concerns as you decide what to do, do not hesitate to re-contact YourMechanic because we want you to make the most of your repair dollars and help you get the best possible results.
I can’t figure out how to get a quote for bolt repair on snapped idler pulley bolt on my 4 cylinder 98 ford contour
ANSWER : Hi there. As of right now, we don’t have a specific service for completing this task. The best way to receive a price estimate for this is to begin by requesting a quote for the idler pulley replacement by clicking this link. Once we receive your data and you are in contact with our sales team, let them know what exactly you need and they should be able to figure out an estimate for this; if this is something that the local mobile mechanic can complete for you.
Ignition coil bolt can’t bolt down
ANSWER : The valve cover on that side of the engine has the broken bolt boss. The only way to secure the coil is to either replace the valve cover so you have the bolt boss to bolt down the coil, or to change the coil involved in the misfire.
Can I use a bigger top idler pulley on my SHO?
ANSWER : You will need to remove the original idler pulley and install the new one and see if it turns freely and does not interfere at all. You will need to use the next longer serpentine belt to make room for the bigger pulley.
My car won’t go past 35mph
ANSWER : Hi there. From the description you provided, your vehicle has problems with the transmission again. You stated it will not shift into 3rd gear again, like before the transmission was rebuilt. If the transmission is again the problem, it should be covered under warranty. It could be a faulty shift solenoid. The shift indicator not reading properly could be a faulty transmission position sensor. If this is an overall lack of performance issue, according to your last statement, then possibly you have a restriction in the exhaust system. I recommend having your vehicle’s problems inspected and diagnosed by a certified technician from YourMechanic.
Will the under body parts get corroded? 2003 Ford F-150
ANSWER : Hello. It all depends on the part that is corroded. The frame can take some corrosion before it will cause a problem. Most other parts would need to be looked at on an individual basis. The brake lines are the first thing that gets damaged and needs replacement. If you are concerned of a faulty component, have a certified professional, like one from YourMechanic inspect the under body, brakes, steering, and suspension to see if there is any work that should be done.
Crankshaft pulley bolt is tight and won’t come loose even with impact 2015 Dodge Dart
ANSWER : Hello – the crankshaft damper pulley bolt on many engines is installed with more than 400 ft lbs of torque. This is tough for us mere mortals to deal with. The first task is to install the correct crankshaft locking device so the engine is not rotated backwards while removing this bolt. Most often, a pin is inserted to lock the flywheel. Use a 3/4" breaker bar with a 4 ft section of pipe extending it and the correct socket. (It is easier than you think to break a 1/2" bar doing this). This may seem extreme, but will also be required when you install your new pulley as well. Caution – this bolt may NOT be re-usable as well – so be sure you have a new one on hand to install. Good luck!
I bought a used car 2010 nissan versa and when I go uphill it slows down alot. When going uphill it says go 60mph I am at that sp
ANSWER : Hi there. When a car is slow to accelerate it can be caused by multiple issues, ranging from fuel systems that are clogged or damaged to an ignition system component failure. It is also possible that something in the driveline system is dragging which causes the lack of acceleration. Since there are so many different possible issues, the best way to start the diagnosis process is to have a professional mobile mechanic from our team come to your location and complete a car is slow to accelerate inspection.
