My car won’t start, it crancks but won’t start engine?

I just have a brand new battery installed , so when I try to start my car lights come on windows work but it just won't start the engine.
Thank you
Sonia

My car has 60000 miles.
My car has an automatic transmission.

Experienced mechanics share their insights in answering this question :
Hi Sonia,
You may possibly have a faulty starter relay. The starter relay directs power from the battery to the starter solenoid which then engages the starter when you turn the key. When this is not working properly, you may notice intermittent starting problems including no response when turning the key to start. Generally, when this does fail, it does so very randomly and usually without warning other than intermittent starting. The power from the battery will still power other accessories such as radio, horn, etc., but you may not have any power to the starter. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

The most common reasons a Kia Forte won`t start are a dead battery, an alternator problem, or failed starter.
If the car cranks when you turn the key, but the engine won`t start, it could be because fuel isn`t getting to the engine. One potential reason for this could be dirty fuel injectors. Over time, the fuel injector nozzles can become clogged with rust, corrosion or debris.
The most common reasons a Kia Soul won`t start are a dead battery, an alternator problem, or failed starter. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.
The most severe problem with the Kia Forte is with the Theta II engine found in 2012 to 2015 models. This engine design is known to be highly problematic, with serious issues affecting Fortes equipped with the 2.0L or 2.4L engines. Engine problems include oil leaks, knocks, and complete engine failure.
If your car won`t start but the battery is good, the most common cause is a faulty starter – though it could also be to do with your fuel. You may have insufficient fuel to get the car going.
With a cranking system, symptoms are divided into one of three possible troubleshooting categories: Click — No-Crank (solenoid clicks but starter doesn`t crank) No-Click — No-Crank (solenoid doesn`t click/starter doesn`t crank) Slow Crank (starter cranks, but engine RPM slow to start vehicle)
The engine won`t turn over. The most common signal that your starter has a problem is if nothing happens when you turn the key or push to start. Unusual noises, such as clinking, grinding and whirring. If you ignore these sounds, it can eventually lead to damage to the engine flywheel.
I believe that with a little TLC, these cars can last up to 300,000 miles. It is a Kia, so the fit and finish is not 100%, and also they do not like to be neglected on maintenance. Other than that it was a great vehicle and if you need a little car and you`re on a budget then look no further.
Complaints include an inability to accelerate, a sudden loss of power, erratic tachometer readings, and issues when trying to shift gears. In this article, we are looking at the most common problems identified in consumer complaints to NHTSA. Currently, there are a total of 14.
If you`ve replaced your battery but the engine still won`t start, it could actually be an engine problem. A seized engine won`t turn over, and that often resembles a bad starter or dead battery. If you suspect that your problem stems from an engine issue, it could take hours to diagnose and repair.
The crankshaft position sensor monitors the position and speed of the crankshaft and other parameters that play an important role when starting the engine. If the crankshaft position sensor is having a problem, the vehicle may have intermittent starting issues or not start at all.
A dead battery is the most common reason why engines fail to start up. A common reason for batteries to fail is drain. Your car`s battery typically expends a small portion of its storage to start your car up, and then recharges from your alternator as you move.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Car won’t start. The check engine light, battery light, and oil change light are coming on. I tried jumping the car and nothing happened. Why won’t my car start?
ANSWER : Hi and thanks for contacting Your Mechanic. If sometimes your vehicle will start with the new alternator and sometimes it won’t, then there is a loose connection in your charging system. Check all of the wires to the alternator and to the battery. Make sure that the battery cables are clean and tight. Make sure that the wires to the starter are clean and tight. A loose ground to the ignition system will cause the vehicle to not crank over. Check all of the ground wires from the battery to the starter. Make sure that they are clean and tight. If you need further assistance troubleshooting your no start situation, then seek out a technician, such as one from Your Mechanic, that can assist you.

The car crank but won’t start
ANSWER : Hi there. This does sound like an issue with the wiring. If the check engine light is coming on every now and then this means that when it does not come on there is no power to the computer. This can be the wiring harness issue or an ignition switch problem. I would have to test for voltage to the computer when the problem is occurring to be able to find where the issue lies. If you need assistance, a certified YourMechanic technician can be dispatched to your location to inspect your vehicle’s non-start issue and suggest any necessary repairs.

My car will not start Intermittently. I purchased a new battery 2 weeks ago and yesterday the car wouldn’t start. Got a jump and
ANSWER : The issue you are having is probably due to an intermittent fault in the starter motor itself or a deficiency in the starter electrical circuit, for example a large voltage drop due to a poor ground or a high resistance connection. These issues can be readily diagnosed and resolved on a mobile basis if you request a hard starting diagnostic. If you request that diagnostic, the responding certified mechanic will get this resolved for you promptly. Based on Toyota’s Factory Service Manual, the battery should not be disconnected if the vehicle engine is running. The battery acts as a large resistive voltage sink and consequently taking the battery out of the circuit, while the alternator is still running, can create a voltage spike on the car’s electrical system which is not good for voltage sensitive components such as the engine computer. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Map sensor car won’t start up good ?
ANSWER : Your MAP sensor is an important input for your computer. It helps determine the load on the engine to calculate the correct amount of fuel to inject. It sometimes takes a few seconds for the vehicle to realize that the sensor is not producing a good signal.

At that point, it will use other methods to determine the fuel rate, such as pre-programmed fuel maps, throttle position, etc. I would suggest replacing the MAP sensor and retesting. If you would like to have it checked first, a certified technician from YourMechanic will be able to scan your vehicle and test components to determine the root cause of your starting issue before making a repair.

My car won’t start, neither does my auto. Start. Sometime it might start if I jump it sometimes it won’t.
ANSWER : Hi there. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem. Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair. You might want to have a mobile mechanic complete a car is hard to start inspection so they can pinpoint the source of the issues you’re having and recommend the right repairs be completed.

My polo 3 won’t start when engine is warm or exposed to the sun for a long time
ANSWER : Hi there,
The problems you are having with your vehicle, may not be easy to diagnose. Apparently, under hood temperature and ambient temperature both create the no start condition. Components can act-up with temperature change. Assuming no check engine light is on. The no start condition will have to be duplicated and inspected at the time of no start. This will help identify what is wrong. So many things can keep the vehicle from starting. I recommend having the vehicles no start condition be inspected and diagnosed by a certified technician from YourMechanic.

My car won’t start, it crancks but won’t start engine?
ANSWER : Hi Sonia,
You may possibly have a faulty starter relay. The starter relay directs power from the battery to the starter solenoid which then engages the starter when you turn the key. When this is not working properly, you may notice intermittent starting problems including no response when turning the key to start. Generally, when this does fail, it does so very randomly and usually without warning other than intermittent starting. The power from the battery will still power other accessories such as radio, horn, etc., but you may not have any power to the starter. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.

Whenever I drive 1.5 miles, the s3 light starts blinking and then when I stop my car and come back to it, the car won’t start.
ANSWER : Hello, thank you for writing in. It is difficult to determine the issue without some more information. To start, when the check engine light illuminates, you want to scan the vehicle for diagnostic codes. These are what set the check engine light off, and are meant to tell the driver what the computer has detected is wrong. Codes can be pulled at most automotive parts stores, and by most technicians. Once you have that information you can focus in on one component or system. If the engine is truly overheating, then you want to start by checking your coolant and fluid levels. For more help with diagnosing and resolving the issue, contact our service department to schedule an appointment.