My car will crank but will not start.
Car was acting like it was missing while driving. Last week, died in the middle of the road. Changed fuel pump, filter, distributor and timing chain. Car still will not start.
My car has 200000 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
Thanks for writing in about your 1994 Buick Roadmaster. There are many things that can cause a no start condition. You may want to have this thoroughly looked at in person by a professional before moving forward with any other repairs. Some basics in the charging or ignition systems may have been overlooked in this case. A qualified technician, such as one from YourMechanic, can come to your car’s location to pinpoint the cause of the no start and help you have this repaired correctly.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
The most common reasons a Buick Roadmaster won`t start are a dead battery, an alternator problem, or failed starter.
If you attempt to start up your car but the engine won`t turn over and the dashboard lights up, then you most likely have an issue with your battery. You could have a damaged or corroded battery terminal, which is stopping the engine from starting up when you fully turn the key.
One of the most common reasons your car can fail to start is because of degraded spark plugs. So, can spark plugs cause your car not to start? You bet. The spark plugs work with ignition coils to ignite your engine.
Dead car battery: A dead battery is the most common reason why a car won`t start. If you have a battery tester, check your battery to see if it`s weak. If you don`t have one, try to jump start your car with jumper cables.
The most common reasons a Buick Encore won`t start are a dead battery, an alternator problem, or failed starter. Search our network of RepairPal Certified shops near you to speak with a technician about your issue.
The most common reasons a Buick Regal won`t start are a dead battery, an alternator problem, or failed starter.
Defective ignition switch If you know your battery is working properly, but your car doesn`t turn over on the first few tries, you might have a problem with the ignition switch. You can try to narrow down the cause of your issue by turning on your headlights.
A Bad Crankshaft Position Sensor The crankshaft position sensor monitors the position and rotational speeds of the crankshaft. Without the crank sensor, the engine control module (ECM) wouldn`t know when to fire the fuel injectors and ignite the spark plugs.
Hard start symptoms and starter failure may NOT be caused by the starter, but could actually be caused by the crankshaft position sensor. If your vehicle is experiencing one or more of these symptoms, the crankshaft sensor may be at fault.
The cause of this problem is usually one of 3 things – a failed starter motor, a bad connection between the battery and starter motor, or a blown fuse (if present) in line between the starter and the battery.
Check the battery if there is a slow crank and a clicking sound, and the car engine won`t start. However, if the check engine light illuminates, the issue could be the engine or fuel pump. If your vehicle doesn`t start, call AAA, roadside service, or another towing company to take your car to get it repaired.
The cause of this problem is usually one of 3 things – a failed starter motor, a bad connection between the battery and starter motor, or a blown fuse (if present) in line between the starter and the battery.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My car will not start Intermittently. I purchased a new battery 2 weeks ago and yesterday the car wouldn’t start. Got a jump and
ANSWER : The issue you are having is probably due to an intermittent fault in the starter motor itself or a deficiency in the starter electrical circuit, for example a large voltage drop due to a poor ground or a high resistance connection. These issues can be readily diagnosed and resolved on a mobile basis if you request a hard starting diagnostic. If you request that diagnostic, the responding certified mechanic will get this resolved for you promptly. Based on Toyota’s Factory Service Manual, the battery should not be disconnected if the vehicle engine is running. The battery acts as a large resistive voltage sink and consequently taking the battery out of the circuit, while the alternator is still running, can create a voltage spike on the car’s electrical system which is not good for voltage sensitive components such as the engine computer. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.
When I go to crank my car the key stays in the start position and the car is constantly trying to crank itself.
ANSWER : First, let’s make sure about some terminology before I proceed. I will assume the motor is actually turning over. If the car is trying to start, the motor has to be turning over or it is not trying to start. This is an important distinction when diagnosing the starting system. As a technician, I go to different parts of the system based on this description.
If the key is stuck in the start position, this is a ignition lock cylinder issue and the reason the starter continues to turn the motor over. If the starter is turning but the motor is not, then the starter is likely the problem. Either that or the teeth on the flex plate are all gone. This would require removing the transmission to repair.
If the car runs intermittently, this can be a big challenge. And it also means the starting system is working. It will need to be diagnosed when it is failing. A working car cannot be diagnosed because there is nothing wrong. Where you park your car should not have any affect. It certainly could be a wiring problem. Wiring problems hide really well and can happen anywhere in the miles of wires that are in your car. Isolating the system that is failing is really important here. At the moment I am unsure which system is failing. Starter system, ignition lock cylinder and or ignition switch electrical or something with the engine control system.
When the car is failing, you need to check for spark and fuel pressure. If neither is present, this is a clue. Usually the crank sensor will do this. Does your car have a tachometer? If so, does it move at all when cranking. This is a clue whether or not the cam and or crank sensor is working. Is there a Check Engine Light on with the key on? If there is a Check Engine Light, the code or codes can be used for specific diagnosis.
All of these concerns will send you down a diagnostic path. Be sure not to confuse yourself by misinterpreting multiple system failures. If the key does stick in the start position, this would be the first problem to solve. After that, does the motor actually turn when the starter turns? After that, the question of "Why won’t it start?" is first answered by finding what the motor is lacking. Fuel, spark etc… Good luck.
If you need assistance with these checks, contact a certified mechanic who has the tools and experience needed to properly diagnose this starting issue with your car.
Car won’t crank when it’s cold and now won’t start at all
ANSWER : Hi there:
Usually this issue is cased by low cranking amps inside the battery. If you’ve recently had the battery replaced, it’s possible that an electrical component that makes up the charging system might be damaged or faulty. It’s also quite possible that the main electrical relay or the starter relay is giving you fits. To know for certain what the exact issue might be on your 1989 Toyota Camry, you should have a professional mobile mechanic complete a car is hard to start inspection, so they can pinpoint the source of your issues and recommend the right repairs.
Map sensor car won’t start up good ?
ANSWER : Your MAP sensor is an important input for your computer. It helps determine the load on the engine to calculate the correct amount of fuel to inject. It sometimes takes a few seconds for the vehicle to realize that the sensor is not producing a good signal.
At that point, it will use other methods to determine the fuel rate, such as pre-programmed fuel maps, throttle position, etc. I would suggest replacing the MAP sensor and retesting. If you would like to have it checked first, a certified technician from YourMechanic will be able to scan your vehicle and test components to determine the root cause of your starting issue before making a repair.
My car starts fine but always like once a month it doesn’t start it cranks ok but it will not start if I let it sit for 6 hours
ANSWER : Hi There,
What you are describing sounds like an ignition coil that may be failing. Ignition coils are prone to this type of erratic functioning or heat cycling when they are beginning to fail due to the temperature fluctuations under the hood which ultimately cause them to shut down causing the car to only run after cooling down for 30-40 minutes. Ignition coils are coated with a varnish-like insulation that becomes brittle over time after being stretched then contracted repeatedly The insulation develops small fractures that open when heated and close when cooled. When open, they allow shorting of coil windings and decrease or eliminate the coil’s ability to function. This process will repeat itself continuously until the coil ultimately fails completely and must be replaced. I would recommend having a professional from YourMechanic come to your location to diagnose and inspect your ignition system.
The car is having trouble starting up ,70 percent of the time it starts right up. the other 30 percent, it randomly won’t start its
ANSWER : Hey there thanks for writing in about your 1998 Honda Accord. This could be a few things. A faulty ignition switch, a failing crank sensor, or possibly other faulty sensors could be the cause. To have this taken care of, consider having a certified technician, such as one from YourMechanic, come to your car’s location to diagnose and repair the hard start issue.
The car crank but won’t start
ANSWER : Hi there. This does sound like an issue with the wiring. If the check engine light is coming on every now and then this means that when it does not come on there is no power to the computer. This can be the wiring harness issue or an ignition switch problem. I would have to test for voltage to the computer when the problem is occurring to be able to find where the issue lies. If you need assistance, a certified YourMechanic technician can be dispatched to your location to inspect your vehicle’s non-start issue and suggest any necessary repairs.
car hesitates when trying to start the car ,but when started then i shut car off and start again it will start right up
ANSWER : Hi there:
Sometimes when you have problems starting an engine initially it is caused by a restriction in fuel flow; caused either by clogged fuel injectors or the throttle body that needs to be cleaned. Once the fuel starts to flow and engine warms up, it’s much easier to start. However, it could also be an air filter, EGR valve or other components that causes this issue as well, which is why it’s best to have a professional mobile mechanic complete a car is hard to start inspection so they can pinpoint the source of this issue.
