my car check engine light suddenly blinking and after sometime car starts vibrating. Is this a serious issue. what should i do now

my car check engine light suddenly blinking and after sometime car starts vibrating.Is this a serious issue. what should i do now.I hope i'll hear from you soon

My car has 251000 miles.
My car has an automatic transmission.

Experienced mechanics share their insights in answering this question :
The Check Engine Light is blinking most likely because the engine is misfiring in one or more cylinders. You will need to have the computer system tested to see what code was stored. The code can then be diagnosed to find the reason your light is blinking and the vehicle is vibrating. You may have other problems besides a misfire and only a diagnostic check will further reveal the problem. If you decide to get this fixed, consider YourMechanic, as a certified technician can diagnose your Check Engine Light and make the necessary repairs.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

The check engine light will come on when any of the following issues are detected by your vehicle`s computer. Shaking or vibration may be caused by things such as faulty spark plugs, poor fuel pressure or misfires.
The Check Engine light on your Toyota Camry (also known as a Malfunction Indicator Light, MIL), when illuminated, usually means there`s a problem with the vehicle`s emissions system. If the onboard computer gets a reading that`s a bit out of whack, the check engine light comes on.
If your check engine light is flashing in your Toyota Camry, we highly recommend not to drive the vehicle and schedule Toyota service today. Below is a list of the most common reasons your check engine light can come on: Issues with any aftermarket items.
While the check engine light can definitely be indicative of serious problems, the most common cause of the flashing is usually an engine misfire. There are many reasons why an engine misfire might be occurring. To run smoothly, an engine must be receiving the correct amount of power from the cylinders in your vehicle.
The most prevalent cause of vibration is problems with your wheels or tires. The potential problems include improper wheel and tire balance, uneven tire wear, separated tire tread, out of round tires, damaged wheels and even loose lug nuts.
Worn or dirty spark plugs can cause a petrol car`s engine to misfire in one or more cylinders, which can cause vibrations when the car is idling or at running speeds. The easiest solution is to replace your spark plugs and check the related wiring. Engine vibrations can also be due to the air and fuel systems.
The simplest way to describe the difference is that the Service Engine light informs us of upcoming expected maintenance. On the other hand, the Check Engine light informs you of an unexpected problem occurring in your engine or exhaust system.
The emissions/exhaust system is the most likely culprit for many check engine lights being illuminated. There could be an exhaust leak or a problem with the catalytic converter. The mass airflow sensor (MAF) is another sensor that is easily tripped or can fail.
How long can you drive with the check engine light on? Once you see the check engine light, it is safe to drive with the light on for 50 to 100 miles. This is because if the issue is with the sensors, then this will buy some time for it to reset, turning the check engine light off.
The reasons for a check engine light turning on can range from something minor like a loose gas cap to something more serious like a faulty catalytic converter. It could even be a sign of internal engine failure. Ignoring the problem can turn a potentially quick fix into a costly and time-consuming repair.
The most common causes of misfires are worn, improperly installed, and mishandled spark plugs, malfunctioning ignition coils, carbon tracking, faulty spark plug wires and vacuum leaks.
Some simple warning signs that the transmission is having problems: Transmission is slow to respond when shifting. Grinding, shaking, vibrating.
To help confirm that the vehicle has an engine speed related vibration, with the vehicle stopped, put it into park or neutral and raise the engine speed to the RPM at which the vibration occurred to see if the vibration can be reproduced. If reproduced, diagnosis should begin with engine speed related components.
Installing new spark plugs is the best way to resolve such vibration related issues. The timing belt ensures the accurate functioning of many critical components of the engine. Any issues with the timing belt can cause your car`s engine to vibrate.
If the Check Engine light/Service Engine Soon light illuminates while you are driving, the car`s on board computer sees a fault in the engines management system that is causing an excess amount of pollutants to be emitted from your car. This could result in engine damage if left neglected.
Particularly, in this case, a flashing check engine light unanimously means that there is a misfire in one of your cylinders. You should not proceed to drive your vehicle, but first assess the problem. Things like frayed wires or loose connections can cause a misfire, similar to how faulty parts can cause one.
Check your gas cap first. Many vehicles have a loose gas cap indicator that will be triggered before your check engine light comes on. If your gas cap is loose or the seal is not tight, the vapor leakage can cause your fuel system to trigger the check engine light.
The odometer method lets you read a check engine light code without a scanner or code reader.
Oxygen sensors are a common cause of “check engine” lights. This sensor is located in the emission control system of your car, and is standard on all vehicles manufactured after 1980. The oxygen sensors are used to ensure that your engine is burning the correct amount of fuel, and running at peak performance.
While the damage may seem small initially, the longer you drive with a bad oxygen sensor, the worse the damage will become. Eventually, you may experience rough idling, poor acceleration, engine misfires, an illuminated check engine light, and failed emission tests.
One of the most common reasons your check engine light may come on is that your oxygen sensor is failing. Your local auto repair shop in Western Washington can replace it for you quickly, which will restore your vehicle`s ability to measure unburned oxygen in its exhaust system.
To reset a check engine light without a scanner, disconnect the negative battery cable and wait a few moments. This will reset the diagnostic system in your vehicle, and if the underlying issue has indeed been resolved, the light should go off immediately.
So why is the light still on? Here`s something you probably don`t know: after clearing the car`s computer you will need to drive for about 50 to 100 miles. As you drive your car the computer will monitor all the sensors and register the results.
The check engine light is constantly on: Your vehicle`s onboard diagnostic system has determined something is wrong and needs to be fixed. Although your vehicle may seem to be operating fine, it`s best to bring it in for service as soon as possible to prevent additional issues.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

my car check engine light suddenly blinking and after sometime car starts vibrating. Is this a serious issue. what should i do now
ANSWER : The Check Engine Light is blinking most likely because the engine is misfiring in one or more cylinders. You will need to have the computer system tested to see what code was stored. The code can then be diagnosed to find the reason your light is blinking and the vehicle is vibrating. You may have other problems besides a misfire and only a diagnostic check will further reveal the problem. If you decide to get this fixed, consider YourMechanic, as a certified technician can diagnose your Check Engine Light and make the necessary repairs.

Car won’t start. The check engine light, battery light, and oil change light are coming on. I tried jumping the car and nothing happened. Why won’t my car start?
ANSWER : Hi and thanks for contacting Your Mechanic. If sometimes your vehicle will start with the new alternator and sometimes it won’t, then there is a loose connection in your charging system. Check all of the wires to the alternator and to the battery. Make sure that the battery cables are clean and tight. Make sure that the wires to the starter are clean and tight. A loose ground to the ignition system will cause the vehicle to not crank over. Check all of the ground wires from the battery to the starter. Make sure that they are clean and tight. If you need further assistance troubleshooting your no start situation, then seek out a technician, such as one from Your Mechanic, that can assist you.

Car started to slow down and then the check engine light, battery, and engine oil light came on. What could cause this?
ANSWER : Hi there. It is possible that the battery cable came loose or the wires to the oil pressure sensor has came loose or failed. Check the battery cables and make sure that the terminals are tight and clean. Check the wires to the oil pressure sensor and make sure that they are connected and not broken. If everything looks good, then the oil pressure sensor may have failed. Plus, check the computer for codes and see what is stored. This will lead you to the part that could have failed. I recommend replacing the oil pressure sensor then checking to see if the lights will go out. If you need further assistance troubleshooting your vehicle, then seek out a technician, such as one from Your Mechanic, that can assist you with the warning lights that came on.

Was driving on the expressway and my car started shaking, check engine light turned on, oil light turned on and off
ANSWER : Hello, thank you for writing in. Shaking and vibrating typically comes from a misfire, or poor engine performance. A lack of oil will absolutely contribute to these symptoms and amplify them, if not cause them to begin with. You want to turn your attention to the cause of the oil leak. If external (you can see the leaking oil), then you will want to trace the leak to the component which has failed. If the leak is internal (or the engine is consuming oil), the leak will be harder to find. It will also explain the poor engine performance due to excess oil in the combustion chamber. A head gasket is one of the main components that will fail and cause these issues. It is however not common for a vehicle this age to have these kinds of problems. You will also want to scan the computer, and see what codes are triggering your check engine light. These diagnostic tools will help you determine what system(s) is to blame for the malfunction. For more diagnostic help, contact our service department to schedule an appointment.

Car not speeding up smoothly, service engine light on when first start driving and car vibrating
ANSWER : Hi There,
It sounds like you may have a dirty or faulty mass air flow sensor. The problem this can cause may also be compounded when the engine is cold due to the change in air density in cooler weather. The mass air flow sensor monitors air intake as it is mixed with fuel prior to being injected into the motor. This sensor relays information about fuel and air temperature, air speed entering the motor and many other things to the ECM which uses this to make adjustments to fuel supply to the motor. A dirty or faulty sensor can cause an imbalanced air/fuel load to be supplied to the motor which results in an over fueling or under fueling situation depending on the conditions. This type of inconsistent fuel supply to the motor may cause a hesitation, loss of power, a jerking reaction, potentially a bit of black exhaust smoke and typically a strong smell of fuel when this sensor is malfunctioning. I would suggest having a professional from Your Mechanic come to your home to diagnose and inspect your vehicle.

While driving at a speed of 40 mph all at a sudden the car speed dropped to 10 mph and stopped with solid check engine light
ANSWER : Hello. Warning lights accompanied with stalling can be caused by many things. If the oil is low I would go ahead and top it off to prevent the possibility of engine damage, however, it is unlikely that low oil is what caused the stalling. Stalling is most commonly caused by issues with the ignition, engine management, or fuel systems. If one of the components, such as a major sensor, the fuel pump, or the ignition coil, go out or have an issue they can cause the engine to stall. If the vehicle is no longer starting then it may be possible that there is an issue with the electrical system as well, perhaps a faulty battery or alternator. If the alternator goes out it will eventually drain the battery, which could also cause stalling. Scanning the computer for trouble codes, once the vehicle is started, will likely reveal some insight into what the issue may be. As the possibilities could be many, I would recommend having a professional technician, such as one from YourMechanic, come to your location diagnose what may have caused your vehicle to stall.

Honda Civic 2008. AC stopped working suddenly and engine check light came ON for a day.Next day AC worked and no engine light.
ANSWER : Hi there. In both cases, when an AC system is not working and a warning light is coming on the dashboard, typically a professional mechanic will complete the same initial inspection, which is to download the stored error codes that triggered the warning light initially. This tends to give them an idea as to what is causing the problems. This could be something as simple as an electrical relay that is faulty or loose or an indication of a computer related "glitch". Either way, the best way to move forward is to have a professional mobile mechanic complete a check engine light inspection.

Check engine light refuses to go off after engine replaced
ANSWER : Hello there, you have a long series of issues going on with your 2013 Hyundai Sonata. If you keep getting a repeating oil light on than there is likely a fault in that system.

Since this fault has lasted after the engine was replaced it could be a oil pressure sensor, wiring harness fault, ECU fault, oil pump, oil strainer clogged, or low oil pressure.

To diagnose this issue properly you need a complete vehicle inspection to start from square one and identify the root cause of all this.