How much does it cost to replace the lug nut stud on a 2006 Honda Pilot EXL

How much does it cost to replace the lug nut on a 2006 Honda Pilot

My car has 157000 miles.
My car has an automatic transmission.

Experienced mechanics share their insights in answering this question :
The cost depends on whether it is in the rear or the front and also on whether there is space behind the wheel hub to push out the stud and draw in a new one. If the wheel hub does not have to be removed from the vehicle (due to no space) the cost is minimal, amounting to the cost of a mobile service call (the stud itself is around $2). On your vehicle, though, if the stud is in the front, the wheel hub probably has to be removed from within the wheel bearing to replace a stud and to do that the steering knuckle has to be removed from the car. Unfortunately, the technology is such that once you press that hub out of the bearing (the bearing is retained in the knuckle; the hub must be pressed out), the races of the bearing get indented by the ball bearings and if you put that now damaged bearing back in service, you will get noise and eventual bearing failure. So, as a practical matter, to replace that $2 stud, you are essentially looking at the cost of wheel bearing replacement. Also, if you do have to remove the knuckle and have the hub out, ALL of the studs should be replaced because the only reason studs break, or are damaged, is if they are over tightened. Not likely that just that one was over tightened. At a part cost of $2 per stud, better to replace all than to put it all back together and have the next one break. As a practical matter, if you schedule wheel bearing replacement – wheel studs the responding certified mechanic will FIRST check to see if the stud(s) can be replaced without the disassembly that I have described. If not, and if you still desire replacement of the stud(s), the mechanic will remove the hub in the general procedure that I have indicated. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you .

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

The average cost for a Wheel Lug Stud Replacement is between $67 and $82. Labor costs are estimated between $57 and $72 while parts are priced between $11 and $11.
M12 x 1.5. 3/4 Hex.
You can fix tire bolts yourself in about an hour and for less than $50. You`ll need to buy a tie rod end remover (OTC No. 7315A, at tooldiscounter.com), or rent one from an auto parts store. Then buy a new stud and two new lug nuts (yes, two of them).
The studs are what the lug nuts attach too, and hold the wheel on. So if the stud snaps, the wheel could fall off. Normally the studs have fractures before they snap, but once the fractures get too large they will snap. This can be dangerous to you and the vehicles around you.
Depending on the type of vehicle it is and the age, the lug nuts may need to be replaced anywhere between five and 15 years. The cost of lug nuts or lug bolts can range from $2 to $7 or $8 a piece on most vehicles.
You can change out the single lug nut without jacking up the car. The other four lug nuts will keep the wheel in place.
M14x1. 5 XXL Bulge Acorn Wheel Lug Nut (7/8″ Hex – Conical Seat)
If your wheel stud has been damaged, stripped, or broken, you will need to replace the stud to ensure the security of your wheels and maximize the safety of your vehicle. A mechanic will usually charge between $60 and $120 to replace a wheel stud because it takes less than an hour.
All of the lug nuts are necessary. Leaving even one off could result in warping of the brake rotors or drums, necessitating their replacement.
Studded Tires

A studded rubber would cost you around $75-$550 or more per tire. For two pairs, you can expect to pay between $300 and $2,200. What is this?

On average, new wheel lug studs cost $4 to $12. This cost does not include labor (which would likely set you back *$61 to $77). If only one stud is missing or damaged, you can drive it safely when traveling a short distance to a repair shop or auto parts dealer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How much does it cost to replace the lug nut stud on a 2006 Honda Pilot EXL
ANSWER : The cost depends on whether it is in the rear or the front and also on whether there is space behind the wheel hub to push out the stud and draw in a new one. If the wheel hub does not have to be removed from the vehicle (due to no space) the cost is minimal, amounting to the cost of a mobile service call (the stud itself is around $2). On your vehicle, though, if the stud is in the front, the wheel hub probably has to be removed from within the wheel bearing to replace a stud and to do that the steering knuckle has to be removed from the car. Unfortunately, the technology is such that once you press that hub out of the bearing (the bearing is retained in the knuckle; the hub must be pressed out), the races of the bearing get indented by the ball bearings and if you put that now damaged bearing back in service, you will get noise and eventual bearing failure. So, as a practical matter, to replace that $2 stud, you are essentially looking at the cost of wheel bearing replacement. Also, if you do have to remove the knuckle and have the hub out, ALL of the studs should be replaced because the only reason studs break, or are damaged, is if they are over tightened. Not likely that just that one was over tightened. At a part cost of $2 per stud, better to replace all than to put it all back together and have the next one break. As a practical matter, if you schedule wheel bearing replacement – wheel studs the responding certified mechanic will FIRST check to see if the stud(s) can be replaced without the disassembly that I have described. If not, and if you still desire replacement of the stud(s), the mechanic will remove the hub in the general procedure that I have indicated. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you .

2006 Honda Pilot EXL-Navigation; 100K miles.
ANSWER : Hi there. In general, the parts for these services you’re looking for can be purchased for around $500 (as long as you don’t go to the dealership). However, I would recommend not purchasing them from E-Bay or Amazon. If you are going to complete these repairs on your own, it’s best to purchase parts from a local auto parts store; so that if they are the wrong size or application, you can easily return them and get the right parts. If you need a professional mechanic to complete these services for you, feel free to start this process by requesting a quote for the water pump replacement; as this would likely be the most expensive one to complete. Once you are communicating directly with the sales department, you can put together a repair package that will resolve all these issues.

I have a 2006 Mazda 3 and the front bumper is damaged, how much would it cost to replace, paint, and install a new one? 2006 Mazda 3
ANSWER : Hello – unfortunately, this is not a service YourMechanic offers at this time. This task is best handled by a collision repair estimator at a reputable paint and body shop. S/he is trained to evaluate visible and not-so-visible damage, and the costs to repair. Contact a reputable paint and body shop in your area for an estimate and repair.

Driving while missing a lug nut and stud
ANSWER : Hello there, driving your 2014 Ford F-150 with a missing lug nut and wheel stud is not safe. Without all the lug nuts attaching the wheel it cannot be properly torqued in a safe manor. Your vehicle should not be driven until the wheel stud is replaced and the lug nut reattached. A qualified Technician such as one from YourMechanic will be able to inspect your wheel stud and make any repairs required to make your truck safe again.

how much would it cost to replace a aluminal nut that head broke off that sit behind oil filter to stop oil leak, & replace starte
ANSWER : Considering that a bolt head has broken off, additional labor may be required than what would normally be necessary to remove the oil filter housing. This can often times involve using a drill to extract the old bolt. If there is not sufficient room for a drill, other parts will require removal in order to gain access for a drill. This could potentially result in an entire day worth of labor depending on what needs to be removed to access the broken bolt. As for the starter, I would recommend having the starter tested. This would invovle using a digital multimeter to make sure that battery voltage is reaching the starter. If battery voltage is reaching the starter, the starter has failed. If battery voltage is not reaching the starter and the battery is 100% good, the battery cable from the battery to the starter has failed. Once this inspection has been done is when an accurate quote can be given for this repair.

Do I need to replace the hubs to go back to factory wheel bolts.
ANSWER : You’re wise to go back to factory fasteners. While there are a few good quality aftermarket products out there for your car, most of the options are a kind of one-size-fits-all that involve spacers and adapters that change the design offset and lead to all kinds of suspension and wheel bearing problems. you should not need to replace the hubs as long as the threads are not damaged. It should be possible to extract the studs through conventional means. If a hub IS damaged, then there is no choice but to replace it. This will involve replacing the wheel bearing as well so it can get expensive. If this project is more than you want to take on, you can contact Your Mechanic to have a technician come to your home or office and change out your wheels for you

I have a 2008 Honda Accord. The dealership just told me I need to replace the battery cables. How much should that cost?
ANSWER : Hi there:

The best way to get a price quote on having the battery cables replaced on your 2008 Honda Accord is to submit a quote from YourMechanic.com. In most cases, our prices are about 30% less than most mechanic shops and dealerships.

Air suspension is not working on a range rover 2006 sport. How much will it cost to be replace
ANSWER : Hi there. The air suspension on Land Rovers is pretty complex; which is why this repair is one best completed by a professional Land Rover certified repair facility. Unfortunately, we would not be able to offer this service and unable to provide you with an accurate estimate.