How do I set the clock?

How do I set the clock?
Experienced mechanics share their insights in answering this question :
Setting the clock is very easy, and only takes a few steps:
1. Press the Trip Computer switch until the settings menu shows up.
2. Rotate the Trip Computer switch to Clock, then press the switch.
3. Rotate the Trip Computer to Set Clock, then press the switch.
4. Rotate the Trip Computer switch to adjust the hour, then press the switch.
5. Rotate the Trip Computer switch to adjust the minute, then press the switch.
Tips
The clock can only be adjusted when the vehicle is not in motion.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

2008 – 2012 Models

Locate the “Clock” button on the audio system or the instrument panel. Press and hold the clock button until the time starts to flash. Use the tuning knob or buttons (usually labeled “Tune” or “Seek”) to adjust the hours.

CLOCK SET/ADJUSTMENT

Press and hold the CLOCK button for approximately 2 seconds. The display will show “H-Seek M-Tune.” Press the SEEK/TRACK button to adjust the hours. Press the TUNE/FF·REW button to adjust the minutes. Press the CLOCK button again to exit the clock set mode.

Press and hold the CLOCK button for approximately 2 seconds. The display will show “H-Seek M-Tune.” Press the SEEK/TRACK button to adjust the hours.
Set your phone`s date and time manually
  1. On your Android phone, open Settings, then: Android 9 select System > Date and Time. Android 8 select General Management > Date and Time. …
  2. Select Set date, then the desired date on the calendar, and tap Done.
  3. Select Set time, then set the desired time on the clock, and tap Done.
Set the Time
  1. Turn on the car`s ignition.
  2. Locate the “Settings” button on your car`s audio system. …
  3. Press the “Settings” button to access the menu.
  4. Use the arrow buttons to navigate to the clock setting and select it.
  5. Use the arrow buttons to adjust the hour and minute until the correct time is displayed.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My new gas gauge should read from about 10 o’clock for empty and about 2 o’clock for full. My needle goes to about 5 o’clock.
ANSWER : You would need to see if the sending unit is shorted to ground. If you test it with an ohm meter you should get somewhere between the 5 and 30 ohms. If you are getting 5, then the gauge will be at full; and if you get 30, it should be at empty. If you are reading too low on ohms, then you have a shorted sender. If you’d like some help looking at this, a technician from YourMechanic can come to your car’s location to inspect your electrical system in person and let you know how to best proceed.

Read Full Q/A … : How do I set the clock?

How do I set the clock?
ANSWER : Setting the clock on the sound system is very easy, and only takes a few steps:
1. Press the Clock button.
2. Use the Up/Down buttons to adjust the hour, then press the OK button.
3. Use the Up/Down buttons to adjust the minute, then press the OK button.

Read Full Q/A … : How do I set the clock?

How do I set the clock?
ANSWER : You can set the clock through your infotainment system, with just a few steps:
1. Turn on the infotainment system.
2. Press the CONFIG button.
3. Select Time and Date Settings.
4. Select Set Time.
5. Turn the MENU or MEN/SEL knob to adjust whichever value is currently highlighted.
6. Press the MENU or MENU/SEL knob to confirm the adjustment, and move to the next value.
7. Repeat steps 6-7 until the time is set.
8. Press the BACK button to save the settings.

Read Full Q/A … : How do I set the clock?

How do I change the Language settings for the main display? The language settings only seem to change in the small upper display.
ANSWER : This can be very difficult when your vehicle is set to a language that is unfamiliar to you. I would recommend looking in your owner’s manual for information relating to the radio interface. This will help to determine how to switch languages on the screen. If not, I would recommend asking a spanish speaking friend if they can navigate the menu for you and change the language back to engish. If all else fails, I would recommend visiting your local Honda dearship as they should certainly be able to help you.

Read Full Q/A … : How do I set the clock?

How do you set the clock?
ANSWER : Your car’s audio system display can show a wide range of information, from the station you’re listening to, to track information for the CD in the player. It can also show you the time, but you’ll need to set the clock to do that. Not sure how? Here’s what you need to know:

Press the button labeled “Clock#.”
Make sure the audio system display has changed to “set time.”
Using the Preset buttons, set the time. Start with the hour and then set the minutes.
Press OK.
Make sure that the clock accepts the time.

Tip

If you have a built-in navigation system, you’ll need to follow different directions for setting the clock. They can be found in your navigation system manual.

Read Full Q/A … : How do I set the clock?

How do I set the clock?
ANSWER : Setting the clock is very easy. It requires just a few simple steps.

Hold the “TIME” button until the numbers on the clock begin to flash.
Rotate the “TUNE/SCROLL” knob on the right side of the entertainment console, until the correct hour is shown.
Press the “TUNE/SCROLL” button to set the hour. At this point, the minutes should begin to flash. Rotate the “TUNE/SCROLL” knob again, until the correct minute is selected.
Press the “TUNE/SCROLL” button to set the time.
Wait five seconds, or press any other button, and the clock will be set.

Read Full Q/A … : How do I set the clock?

How do you set the clock with a navigation system?
ANSWER : Setting the clock on a car with a navigation system is just as simple as one without the nav system. It might actually be a little easier. Here’s what you need to do:

Press the setting button.
Choose clock.
Choose your format (12 or 24 hour).
Choose to offset the hour.
Choose to offset the minute.
Choose whether daylight savings time should be active.
Select your time zone.

Tip

The clock automatically sets itself, so there should be little to no need to actually set it. It does so based on GPS connectivity.

Read Full Q/A … : How do I set the clock?

How do you set and use the clock?
ANSWER : If your car doesn’t have a navigation system, then you’ll need to manually set and adjust your clock. Doing so is easy – here’s what you should know:

Press the clock button.
Hold it for a few seconds.
Use the seek button to adjust the hours. Use the tune button to adjust the minutes.

Both have up/down arrows that let you add or subtract minutes or hours.

Once you have set the clock, just press the clock button again to accept the time.

Read Full Q/A … : How do I set the clock?