How do I remove the head restraints?

How do I remove the head restraints?
Experienced mechanics share their insights in answering this question :
Occasionally, you may want to remove the head restraint to haul a long piece of cargo that extends up to the front seat. To give you more room, you can remove it and replace it when you are done.

Pull the restraint up just as you would to adjust it higher. At the same time, you’ll hold down on the Lock Release button located on the left side of the restraint.
To put the head restraint back on, you will line up the restraint with the holes and push down on it. At the same time, you need to hold the Lock Release button.

Tip

Check that the restraint is locked in place by trying to move it up or down.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

It is best not to remove the headrest from the car, since in the event of a rearward movement, the head restraint of the child car seat will meet the headrest of the car, which will prevent the child car seat from bending backwards.
According to the National Highway Traffic Safety Administration, it is not legal to remove the headrests from a vehicle. It is unlikely that police would cite an individual for this infraction, as there is generally not much attention paid to it.
To prevent your head from yanking backward in a rear-end collision (reward hyperflexion), the headrest pushes your head forward and down to keep it close to your spine.
The reason for this design was because the car companies noticed drivers were not sitting with their head against the headrest. In result they pushed the headrest forward to prevent whiplash if a car crash were to happen.
It also reduces head injuries to front seat passengers in accidents where a rear seat passenger is thrown forward (which of course shouldn`t happen if the rear seat passenger wears his seat belt). It is impossible to remove head restraints in many cars.
There are two common reasons, 1. to get a better shot of passengers in the back, 2. to make blue screen shots easier (less often an issue these days). They remove head rests even when there are no passengers in the back so they can keep continuity between other shots that do.
Because newer cars have head restraints designed so that you either have to drive laying down, or you sit upright with the head restraint pushing your head forward so that you wind up looking at your knees.
There are two common reasons, 1. to get a better shot of passengers in the back, 2. to make blue screen shots easier (less often an issue these days). They remove head rests even when there are no passengers in the back so they can keep continuity between other shots that do.
Here`s how it`s done: Headrests should ideally be positioned two inches or less from the rear of the driver`s head, and never more than four inches. When adjusting for height, the bulk of the headrest should stand directly behind the driver`s head, at ear-level.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

can i remove cylinder head without removing engine from the car
ANSWER : It is possible to remove the head while the engine is in the car, but it’s going to be tight. This can be a difficult and even dangerous job. Unless you feel very comfortable with this type of work, you will probably want to enlist the help of a professional for assistance.

How do I remove the rear head restraints?
ANSWER : The rear head restraints are important safety features that should remain on in almost all circumstances. However, the rear head restraints can sometimes interfere with child restraint systems. If this is the case, you can remove the rear head restraints by doing the following:

Fold the rear seatback partially forward.
Press and hold both of the buttons on the rear head restraint. These buttons are located where the restraint meets the seatback.
While holding the buttons, pull up on the head restraint until it has been removed.
Lock the seatback back into place.

How do I remove and reinstall the head restraints?
ANSWER : For your comfort, your truck comes with adjustable head restraints. These head restraints can be easily removed and reinstalled. To remove and reinstall the head restraints.

Pull up on the head restraint until it cannot go any further.
Hold both the adjust/release button and the unlock/remove button while pulling up on the head restraint to remove it.
Place the two head restraint stems into the guide sleeve collars.
Push the head restraint down.

How do you remove the head restraints?
ANSWER : While you should never drive or ride without head restraints, there may be times that you need to remove them. For instance, if you’re lowering the second row seats, you’ll need to remove the two outside head restraints (the center can be pushed down to the lowest position). Here’s how to remove them when you need to:

Push the lock release button in.
Pull up on the head restraint.
Pull the head restraint out of the inserts.
Store it somewhere safe.

Tips

Never drive or ride without a head restraint in place.
Always replace the head restraints when you’re done.

How do you remove the head restraints?
ANSWER : The head restraints on your Accord are for both comfort and protection in the event of an accident. However, they’re also designed to be removed. To do so, just follow these steps:

Locate the tab/release button on the head restraint leg.
Push it in.
Without releasing the tab, pull the head restraint up until the legs come free.

To replace the head restraints, simply insert the legs back into the holes on the top of the seat backs. You’ll need to press the release button/tab to adjust it to your liking.

How do I remove the head restraints?
ANSWER : Both front head restraints, as well as the rear center head restraint, can be removed. Removing the restraints is very easy:
1. Lift the head restraint directly up until it is set to the highest setting.
2. Press and hold the release button, which is located at the base of the head restraint’s legs.
3. While holding the release, pull the head restraint up to remove it.

How do you remove and reinstall head restraints?
ANSWER : Your car’s head restraints serve and important purpose in providing better comfort, but also in ensuring safety during an impact. Of course, there may come a time that you need to remove them (and reinstall them when you’re done). Here’s what you need to do:

Pull the head restraint all the way up.
Press both the Unlock button and the lock release button (one on each shaft).
Pull the head restraint out of the seat back.
Store the head restraint somewhere safe.

To reinstall:

Insert both shafts into their holes (make sure the head restraint is facing the right way).
Slide the head restraint down until you feel the locks activate.
Adjust it to the height of the person in the seat.

Tips

Never ride without the head restraints in place unless absolutely necessary.
For the right adjustment, make sure the top of the head restraint is even with the top of the person’s head.

How do I remove the head restraints?
ANSWER : The head restraints can be removed very easily. To do so, simply press and hold the release button at the bottom of the restraint legs, and pull the restraint up until it is removed.