How do I install a child seat using the seat belt?

How do I install a child seat using the seat belt?
Experienced mechanics share their insights in answering this question :
It is very important that a child seat is properly installed before driving with a child in your vehicle. To properly secure a child seat in your vehicle, follow these steps:
1. Place the child seat on one of the rear seats.
2. Follow the child seat’s instruction manual to properly run the seat belt through the child seat, and buckle the seat belt latch.
3. With the seat belt buckled, slowly pull on the shoulder strap until the entire belt has been extracted. This process activates the seat belt lockable retractor.
4. Release the seat belt, which will retract until it is firmly securing the child seat. Pull on the seat belt to make sure that the retractor worked. If there is still slack in the belt, then the retractor did not activate; you should not be able to pull the belt out at all.
5. Pull the shoulder strap of the seat belt up, to make sure to release any slack that remained in the lap strap of the seat belt.
6. Try and move the child seat to make sure that it is firmly secured.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

In the 2012 CR-V, the rear outboard seating positions are fitted with dedicated LATCH attachment points. The LATCH system features built-in, ready-to-use anchors and tethers allowing compatible child safety seats to be installed without using the vehicle`s seat belt system.
Locate the anchor marks affixed to the base of the seat cushion. 2. Place the child seat on the vehicle seat, then attach the child seat to the lower anchors according to the instructions that came with the child seat. Make sure that the lower anchors are not obstructed by the seat belt or any other object.
All CR-V models are equipped with a child seat-mounting system called LATCH (Lower Anchors and Tethers for CHildren) in the rear seating positions.
The second row has ISOFix points in the two outer seats, which are within plastic guides behind a flap of seat leather. I found them nice and easy to connect to. I could fit three child seats across the second row, which is fantastic.
Buried or nonexistent anchors mean that the seat belt is often your best — or only — option when installing a car seat. This might make parents nervous, but a car seat installed with a seat belt can be just as safe as one installed with the Latch system, provided you know what you`re doing.
*For ISOFIX car seats for children, you will need to buckle up with the seat belt after ISOFIX installation. Because we know that children like to do everything by themselves, we have designed our child car seats especially for them, so they can buckle up all by themselves.
2012 Honda CR-V models

All LX models also have a four-speaker sound system with a CD player, a Pandora interface, an auxiliary audio jack and a USB/iPod interface.

Fourth generation: 2012-2016, with most notable redesigns in 2012. Third generation: 2007-2011, with redesigns in 2007. Second generation: 2002-2006, with redesigns in 2002. First-generation: 1997-2001, with Honda debuting the CR-V lineup in 1997.
The Honda CRV can run for well over 200,000 miles and, if maintained with a lot of tender love and care, it can keep chugging along even past 300,000 miles. Like all of Honda`s vehicles, the CRV can last for such a long time because of the craftsmanship and high-quality materials that are used for its construction.
They are within plastic casing located behind a slit in the seat upholstery fabric, so they are a little bit trickier to get to but not any harder to connect to though. There are three top tether points in the CR-V, they are located in the ceiling just in front of the boot door.
The CR-V is one of the few Honda models to have three Isofix points fitted across the back row. However you may find the reality of using all three Isofix points at once a little bit of a squeeze, so we`d definitely recommend looking for narrower child seats.
Car seats can be installed using two different methods: The vehicle seat belt or Lower Anchors and Tethers for Children (LATCH). Many parents wonder which option is the safest way to install their child`s car seat. In situations where either installation method is allowed, one is not usually safer than the other.
Lap-sash seat belts for all seats allowed the fitment of a baby car seat, and ISOFIX mounting points were fitted from 2013 on the diesel variants, and 2014 across the rest of the range.
2022 Honda CR-V – the 2022 Best Compact SUV for Families

It`s an Insurance Institute for Highway Safety (IIHS) Top Safety Pick. It has one of the roomiest interiors in its class, with lots of space for kids and cargo. And bulletproof Honda reliability means it holds its value well for the day you need to sell it.

Install the car seat in the back seat according to the seat maker`s instructions. Use either the seat belt or Lower Anchors and Tethers for Children (LATCH) system. Use the tether strap to keep the seat extra stable. It`s a strap that hooks to the top of the seat and attaches to an anchor in the car.
An Isofix child seat is `plugged` into the corresponding fitting points in the car, removing the need to use the car`s seat belts to secure it. An additional top tether or support leg is used to prevent the child seat titling or rotating in an impact.
ISOFIX was first introduced in 1997 so it`s been around a while. It was developed by Britax-Romer in collaboration with VW and by 2001, most European cars are believed to have integrated the technology.
By using both the Lower Anchors and the seat belt system when you shouldn`t, the force of the crash will place stress on the wrong areas of the car seat, which can cause the car seat not to function properly. In fact, most manufactures advise that using both doesn`t allow the car seat to move properly during a crash.
You can find out whether your Honda is an EX or LX by decoding the VIN. VIN (Vehicle Identification Number) is a 17-character code that gives you information about your car, such as: Trim level.
While your car is in park, but running, go to “Settings” and then “Phone” on your Display Audio system. You should then be able to choose the Bluetooth® Device List. Your phone will either show up, or you will have to add it by hitting “Add Bluetooth® Device”. (Be sure that the Bluetooth® on your phone is enabled).
You can determine if Your Honda CR-V is an EX/LxBy the VIN on the metal plate on top of the driver`s side of the dashboard. The eighth digit is the one that will determine the Vehicle Grade.
In the U.S., CR-V is manufactured in Ohio at the East Liberty Auto Plant of Honda of America Manufacturing, Inc., using domestic and globally sourced parts. The East Liberty Auto Plant earned a Silver Award for outstanding quality in the recently released J.D. Power 2011 Initial Quality Study.
Some say it stands for “compact recreation vehicle,” while others insist it`s short for “comfortable runabout vehicle.” The acronym hasn`t caught on. Consumers and car manufacturers have gravitated to the more generic term “crossover SUV” to describe all of these vehicles.
The 2012 Honda CR-V is a good used SUV. It has some of the best fuel economy estimates in the compact SUV class, and it offers carlike handling and maneuverability. It should meet the daily needs of most buyers, but its four-cylinder engine can be sluggish. Many rivals offer stronger engine options.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How do I install a child seat using the seat belt?
ANSWER : It is very important that a child seat is properly installed before driving with a child in your vehicle. To properly secure a child seat in your vehicle, follow these steps:
1. Place the child seat on one of the rear seats.
2. Follow the child seat’s instruction manual to properly run the seat belt through the child seat, and buckle the seat belt latch.
3. With the seat belt buckled, slowly pull on the shoulder strap until the entire belt has been extracted. This process activates the seat belt lockable retractor.
4. Release the seat belt, which will retract until it is firmly securing the child seat. Pull on the seat belt to make sure that the retractor worked. If there is still slack in the belt, then the retractor did not activate; you should not be able to pull the belt out at all.
5. Pull the shoulder strap of the seat belt up, to make sure to release any slack that remained in the lap strap of the seat belt.
6. Try and move the child seat to make sure that it is firmly secured.

How do you reset the seat belt light on a 2006 Murano?
ANSWER : You will need to have your body computer scanned to get the codes from the seat belt module. If may have stored the code due to the battery was not disconnected when seat was removed causing the system to see problems in seat circuits. You may just have to have the codes cleared and if no problem codes return the you will be okay.

hey i had a belt break while traveling on my 2004 honda pilot. It is the small belt and not the serpentine belt. The mechanic t
ANSWER : Hello. The smaller belt is known as your timing belt, and it works inside the engine to keep mechanical components aligned with each other during the compression cycle. The serpentine belt, which is the big belt, drives the alternator, water pump, AC compressor, and a couple of other components. If the small belt broke it is likely the timing belt. This will cause the car to stall, lights to illuminate, and can even cause serious damage to the engine. Typically replacing a timing belt is a lot more complicated and expensive than replacing a serpentine belt. You may want to receive a second opinion on the car before you go ahead with repairs.

What type of maintenance is needed for child seats and seat belts?
ANSWER : While your seat belts require only basic maintenance, and your car seat(s) only requires regular cleaning, there are some specific steps that you’ll need to take to ensure the safety of your little ones, as well as other passengers in the car.

Car Seat Maintenance:

Regularly inspect the car seat for any damage, dirt and grime. Clean it regularly. See your manufacturer’s specific information regarding cleaning and maintenance.

Seat Belt Maintenance:

Clean your seat belts regularly with mild soap, water and a soft cloth.
Let them dry before allowing them to retract.
Clean retraction points with a cloth to prevent dirt from entering the retractor, which can cause your belt to move slowly.
Check the condition of shoulder belt adjusters.
Check the condition of all seat belts (look for snags, tears and other signs of damage).

How do I know when a child is big enough to use a seat belt?
ANSWER : At some point a child outgrows the child seats, and is ready to sit in the car seats, and use a seat belt. Here are a few things that you should check to see if your child is ready to ride without a child seat:
1. When the child sits upright at the back of the seat, their knees should easily bend at the end of the seat.
2. The lap belt should run over the child’s thighs, and not across their stomach.
3. The shoulder belt should run over the child’s shoulder, and not over their neck or head.
4. The child should be able to stay relatively still throughout the entire drive.
If the child does not fit all of these specifications, then they should remain in a child seat.

How do I install a child seat to the front seat with a tether strap attachment?
ANSWER : There are several ways of attaching a child seat in your truck. One of those ways is with a tether strap attachment. To install a child seat to the front seat with a tether strap attachment.

Pull the child safety seat tether strap under the head restraint.
Find the correct anchor for the seating position.
Attach the tether strap to the anchor.
Tighten the tether strap.

How do you install a car seat that uses the lap belt?
ANSWER : While most newer car seats are designed to use the Lower Anchors and Tethers for CHildren (LATCH) system, there are still some models on the market that rely on the seat belt to secure the car seat. Here’s how to install one of them:

Position the car seat correctly (in the back seat – never in the front).
Follow the car seat manufacturer’s directions and route the belt through the back of the car seat (or over the front if you’re using a rear-facing car seat).
Buckle the seat belt.
Pull the slack out of the shoulder belt portion.
Lock the retractor: To lock the retractor, pull the shoulder belt slowly until it will not extend any farther.
Check that the car seat is secure.

How do I install a front-facing child restraint with a seat belt?
ANSWER : A front-facing child restraint system that uses a seat belt is easy to install. To do so, follow these quick steps:
1. Place the restraint on one of the rear seats. While you can install a front-facing restraint in the front seat, you should always situate it on a rear seat. If you use the front seat, be sure that the Passenger Airbag Off indicator comes on.
2. Run the seat belt through the child restraint system, following the instructions provided by the manufacturer.
3. Buckle the seat belt.
4. Extend the shoulder belt fully, and then release it so that it retracts. This sets the Automatic Locking Mode, which will ensure that the seat is held firmly in place.
5. Remove any remaining slack in the seat belt by pulling on the shoulder and lap belts.
6. Check all aspects of system and belt, by trying to move the child restraint. You should not be able to move the system more than an inch from side to side.
Tips
Always follow the instructions provided by the child restraint system’s manufacturer.