How do I calculate the load carried ?

How do I calculate the load carried ?
Experienced mechanics share their insights in answering this question :
It’s easy to think that your car can carry pretty much whatever you can cram inside, but that’s not actually the case. Your car has a weight limit, and it’s probably not as high as you think. This limit includes the weight of the driver, all passengers, all cargo, and the tongue of the trailer if you’re towing one.

Honda rates the Accord with a weight limit of 850 pounds. To determine what your actual load is, follow these steps:

Add together the weight of the driver and all passengers.
Subtract this number from 850.
The result is the amount of weight available for cargo or hauling.
Determine the average weight for all the cargo you want to carry.
If the cargo weight exceeds the remaining weight allowance, it’s not safe to carry it.
If you’ll be towing a trailer, the tongue weight will need to be factored in as well.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

The towing capacity of the 2012 Honda Accord supports up to 1200kg. This is a braked figure, while the maximum load for any vehicle without using trailer brakes is 750kg, if rated to tow that much in the first place.
The maximum load for your vehicle is 850 lbs (385 kg). See the Tire and Loading Information label attached to the driver`s doorjamb. This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.
The Ford Fusion, Honda Accord, and Mazda6 midsized sedans, for example, all have a combined load capacity of 850 lbs.
2012 Honda Accord Value – $4,807-$15,282 | Edmunds.
Calculating your vehicle`s maximum payload is straightforward. You take the GVWR and subtract your vehicle`s curb weight. The remainder is your total maximum payload.
Smaller cars and sedans have a weight limit of 400-500 pounds. Of course, this limit depends on the type and size of vehicle you have. Some higher-seating capacity vehicles will reach their limit if every seat is occupied.
Load Index: 83 (1074 lbs.)

The load index indicates the maximum weight that a tire can support when properly inflated. The higher the tire`s load index number, the greater its load carrying capacity.

The Kerb weight of the Honda Accord is 1620 kg. Check similar car details: What is the weight of Toyota Camry? What is the weight of Audi A4?
The towing capacity of the 2013 Honda Accord supports up to 1600kg. This is a braked figure, while the maximum load for any vehicle without using trailer brakes is 750kg, if rated to tow that much in the first place.
Is the 2012 Honda Accord a Good Used Car? The 2012 Honda Accord is a great choice among used midsize cars . It aced all of its crash tests and earned an above-average reliability rating, and although the Accord`s trunk is on the small side, its cabin is incredibly roomy.
How Long Will the 2012 Honda Accord Last? A properly cared for 2012 Honda Accord will last over 250,000 miles, which is better than average for a midsize car. Regular annual maintenance costs are more affordable than the competition.
At least Honda`s drivetrain is efficient: With a fuel-saving cylinder deactivation system, the V-6 Accord sedan gets an EPA-estimated 24 mpg in combined city/highway gas mileage.
Subtract the curb weight from the GVWR to find the payload capacity. For example, if you have a light-duty truck with a GVWR of 9,000 pounds and a curb weight of 6,000 pounds, the payload capacity will be 3,000 pounds: GVWR – curb weight = payload capacity. 9,000 pounds – 6,000 pounds = 3,000 pounds.
FAQs. How much can I carry in my check-in luggage? You can carry a maximum of 15 kgs per person on domestic flights and around 23-30 kgs per person on international flights. The weight limit on an international flight depends on the airline and the destination you are travelling to.
Load capacity is in the road freight transport the maximum weight of goods declared permissible by the competent authority of the country of registration of the vehicle.
Maximum Weight Carrying Capacity:

Gross Trailer Weight: 2500 lbs. Tongue Weight: 250 lbs.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How do I calculate the load carried ?
ANSWER : It’s easy to think that your car can carry pretty much whatever you can cram inside, but that’s not actually the case. Your car has a weight limit, and it’s probably not as high as you think. This limit includes the weight of the driver, all passengers, all cargo, and the tongue of the trailer if you’re towing one.

Honda rates the Accord with a weight limit of 850 pounds. To determine what your actual load is, follow these steps:

Add together the weight of the driver and all passengers.
Subtract this number from 850.
The result is the amount of weight available for cargo or hauling.
Determine the average weight for all the cargo you want to carry.
If the cargo weight exceeds the remaining weight allowance, it’s not safe to carry it.
If you’ll be towing a trailer, the tongue weight will need to be factored in as well.

How heavy of a load can my car carry?
ANSWER : The maximum weight that your vehicle can carry is listed on the information placard, which is located on the inside of the door.

how to remove the spring loaded belt tensioner the serpentine belt is kept tight with.
ANSWER : Hey there. You will need to remove the entire housing that contains the spring. Belt tensioners are replaced as a unit. In the case of the 4.7L Toyota Motor, you will need to remove a couple of the plastic timing covers to allow the tensioner assembly to slide out and off of its studs. Once you remove the timing covers, you will be able to see the entire assembly and identify which bolts and nuts must be removed to remove the tensioner. You may need to remove the fan belt pulley to remove one or more of the covers. I suggest purchasing a new one first, then you will be able to see all that needs to happen. If you should need help with this project, or would simply like it to be done for you, have a certified technician from YourMechanic come to your car’s location to assist with your drive belt replacement.

Ford 5.4 knocking noise under load or high rev 2007 Ford E-250
ANSWER : Hi there – engine knocking under a load, or when "snapping" the throttle open, is usually worn connecting rod bearings. With your advanced mileage, this would not be unusual. I would recommend an engine noise inspection by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, diagnose this problem, give you an accurate assessment of damage and cost estimate for repairs.

Engine stutters under load in high gear.
ANSWER : This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear or engaging the brakes). The Manifold Absolute Pressure (MAP) sensor senses engine load and generates a signal that is proportional to the amount of vacuum in the intake manifold. The engine computer then uses this information to adjust ignition timing and fuel enrichment. When the engine is working hard, intake vacuum drops as the throttle opens wide. The engine takes in more air, which requires more fuel to keep the air/fuel ratio in balance. When the computer reads a heavy load signal from the [MAP sensor]((https://www.yourmechanic.com/services/manifold-absolute-pressure-sensor-map-sensor-replacement), it adjusts the fuel mixture to slightly more rich than normal so the engine can produce more power. The computer will then retard (back off) ignition timing slightly to prevent detonation that can damage the engine and decrease performance. This may also be caused by other closely related components such as a dirty or failing mass air-flow sensor, a faulty throttle position sensor or potentially a vacuum leak. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.

What is the tire and loading information label and where do I find it?
ANSWER : The tire and loading information label provides with a lot of important information about your tires, about the load limits on your car, the tire pressure and a lot more. Knowing where to find it and how to read it will ensure that you’re a better informed driver. Here’s what you need to know:

The tire and loading information label is found on the inside of the driver’s door jamb.
The label includes information about the right tire pressure for the front and rear tires.
The label tells you what size tires you need on your car.
The label tells you how many people can sit in the car, and where seating is located (2 in front and 3 in rear, for instance).
You’ll find the total amount of weight your car is rated to carry on this label.
You’ll find the size and air pressure for the spare tire on this label.

How do I unfold the fold flat load floor?
ANSWER : The fold flat load floor is easy to access if your car comes equipped with it. It only takes a few steps.

Lift up the rear seats bottoms, and fold them up towards the back of the seats.
Under the seat cushions is the fold flat load floor, which has a handle on it. Grab the handle and pull the load floor out, like a sofa bed, until it is flat and secure.
When you want to unload the fold flat load floor, just reverse the process.

Metallic ringing(bell maybe) sound when accelerating or engine under load?
ANSWER : Hi there. If I had to guess, based on your inquiry, my first thought would be to check your oil level, as commonly this type of noise is related to a lack of lubrication in the cylinder heads and the "pinging" noise is caused by lifters that are rubbing without proper lubrication. However, using 93 octane gasoline in a Chevrolet Impala along with the added "NOS" fuel additive could also create this type of pinging noise. Many of today’s fuel additives are filled with copious amounts of catalyst (or metals) that help in the ignition of gasoline. The reality is that normal gasoline only burns at an efficiency rating of maybe 80%. The rest of the unburned fuel is expelled out of the exhaust as "emissions". The additive can cause the ignition of fuel in the combustion chamber to fire slightly before TDC, which does improve the efficiency of the burn but it can also cause an engine ping. My advice would be to check your oil level first, start using 89 or 91 octane fuel, no additives and see if that solves your issue.