How do I adjust the fan speed for the rear seats?

How do I adjust the fan speed for the rear seats?
Experienced mechanics share their insights in answering this question :
The fan speed for the rear seats is adjusted via the Rear Fan Speed buttons. Press the + button to increase the speed of the rear fan, or press the – button to decrease the speed.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :


The system will automatically adjust the fan and air delivery mode to reach and maintain the selected temperature.

The Ford Escape does have aircon vents in the back of the central console box, which are great for keeping the rear passengers comfortable.
Climate Control – Rear Passenger Climate Controls

Press and release the button to direct airflow to rear footwell air vents. Note: Air can be directed through any combination of air vents.

As the name(Rear AC vent) defines, it is just an extra vent connected to AC and works similar to front AC vents.
Rear Window De-fog

This one is particularly useful in winter when you need to defog the rear window of your vehicle. Unlike your front windscreen, there are no air vents to blow hot air onto the screen. Instead the rear defogger sends an electrical current through the grid which is made of a mixture of metal and resin.

(6) Once in the vehicle, point your front A/C vents up towards the ceiling to help direct airflow to the back seat. Crack open back window to help circulate the air.
If your air conditioner is blowing out warm air, your unit`s refrigerant levels might be low. This usually indicates a refrigerant leak in your system! If that`s the case, your air conditioner will continue to run and blow out warm air, trying to reach the temperature you set on your thermostat.
What it really does is remove heat and humidity from it. The evaporator can be somewhat compared to a heater core working in reverse: Both are located inside the passenger compartment, often in very close proximity, or even inside the same housing under the dashboard.
If your car`s air conditioning isn`t blowing cold air at all (or it tries, then turns warm), you could have a clogged expansion valve, a faulty compressor clutch, a leak, or a malfunctioning fuse in the system.
The Basics of Supply and Return HVAC Vents

Supply vents push air that`s been conditioned by your HVAC unit throughout your home. Return vents pull stale air into the ductwork so that it can be reconditioned and circulated throughout your home once that`s complete.

Return air vents are generally located near the center of the homes. Older and newer homes often have one register per floor, but homes built from 1960-1990 may have a cold return air vent in each room.
The various controls of climate include latitude, land and water distribution, prevailing winds and belts of high and low pressure, ocean currents, altitude, topography, clouds, and cyclonic activity.
Climate control consistently monitors the temperature in the car and then heats or cools the cabin space accordingly, whereas air-con is more of a manual system where you have to tell it what to do. You set the temperature and fan speed, and then the air con will stay on those settings until you adjust them yourself.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How do I adjust the fan speed for the rear seats?
ANSWER : The fan speed for the rear seats is adjusted via the Rear Fan Speed buttons. Press the + button to increase the speed of the rear fan, or press the – button to decrease the speed.

Front A/C fan not blowing, but front seat cooling and rear A/C fans are working.
ANSWER : What you are describing sounds like a failure of the blower motor that circulates air in the HVAC system, however, there are certain faults that could occur in the electric circuit that powers the blower motor. If power is reaching the blower motor when the blower switch is in the on position and the blower motor is not functioning as intended then the blower motor is condemned and replaced. On the other hand, if there is no power, then the blower switch and the plug connection on the back of the switch, as well as the rest of the circuit should be inspected. If the circuit includes a blower motor resistor block, of course the resistor block has to be checked for continuity (i.e., specified resistance in ohms) at each position. If equipped with a relay in the circuit, that is easy to test and if the relay works consistently as commanded, you can assume there is no fault there. If you want these diagnostic steps performed by a certified Mechanic, dispatched by YourMechanic right to your location, please request a non functioning blower motor diagnostic/replacement and the responding mechanic will get this resolved for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic.

The seats in your truck were designed to create a comfortable ride. To add to the comfort, the seats can be adjusted. To adjust the seats.
ANSWER : Lift up the track release bar under the seat.
Move the seat backwards and forwards and release the track release bar when it is in the position you want it in.
Pull the release lever on the side of the seat.
Push the seat backwards and forwards and release the release lever when it is in the position you want it in.
If your vehicle has an electric control, you can also use this to move the seat back both backwards and forwards, as well as recline the seat.
Turn the Lumbar Support dial, or press the Lumbar Support control, to increase or decrease the amount of Lumbar Support on your back.

Nissan altima 2013 rear seat latch is broken and I cannot fold down the seat. How do I repair the broken seat latch? What should I
ANSWER : Hello, thank you for writing in. Correcting the issue will involve finding out what the exact issue is first. The latch has a handle that is pulled to release it. If the handle is broken, and you cannot release the latch, you will need to replace the handle. They typically screw or bolt on with ease. If the latch itself is broken, then you will have to manually release the latch with a screw driver or other means first before replacing the entire latch unit. For more help with the repair, contact our service department to schedule an appointment.

Side mirrors will adjust, but not the rear view mirror
ANSWER : Hello! The rearview mirror is not electronically controlled like the side mirrors. To move the rearview mirror you just grab it with your hand and slightly twist it into the position that you wish. My information indicates that there is a section in your owner’s manual referring to the adjustment of the rearview mirror.

If it’s still unable to be adjusted and you think it needs to be fixed, contact a qualified mechanic who can replace your rearview mirror at your own convenience.

Removal of rear seat
ANSWER : Hi there. This video shows how the process is completed on the 9th Gen Honda Accord. The process for your 2003 is nearly identical.

removing driver electric driver seat, seat stuck all the way back.
ANSWER : Hi there. Although this video is for a GMC, the process of manually adjusting a broken electrical seat is the same.

2011 Chevrolet Camaro"Driver side power seat"…..Seat back won’t come up. Dealer says its over $4,000.
ANSWER : Without knowing what the actual problem is, it would be difficult to say which estimate is accurate. It is quite a price difference. The problem can be caused by a faulty electric motor, which may be a few hundred dollars to replace, or possible a broken seat frame or drive mechanism, which can cost much more One of our mobile technicians can come to you and check into why the seat is not working and give you a diagnosis and/or estimate for repairs.