Engine failure to start

I have a 93 jeep grand cherokee Laredo. Out of nowhere it will not start. Motor turns over great but just wont hit a lick. I check fuse box under the hood and 30 amp fuse was blown. I replaced it tried it again and fuse popped and smoke started coming out from around fan blower. What is my next step to try and fix this problem?
Experienced mechanics share their insights in answering this question :
Hi there. The fact that you’ve had a 30 amp fuse pop twice while starting to start indicates that you’ve got a pretty serious electrical problem with your 93 Jeep. Before you attempt to start the vehicle again, I’d contact a professional mechanic and have them complete an electrical problem inspection; so they can pinpoint the source of your Jeep’s electrical problems.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

If the car cranks when you turn the key, but the engine won`t start, it could be because fuel isn`t getting to the engine. One potential reason for this could be dirty fuel injectors. Over time, the fuel injector nozzles can become clogged with rust, corrosion or debris.
Why won`t my car start but the battery is good? If your car won`t start but the battery is good, the most common cause is a faulty starter – though it could also be to do with your fuel. You may have insufficient fuel to get the car going.
One common culprit for this problem is the crankshaft position sensor, which measures the position and speed of the crankshaft. The computer uses the information from this sensor to know when to fire the spark plugs. If the sensor isn`t working, the spark plugs won`t fire, keeping the engine from starting.
If you don`t hear clicking when you start the engine, the problem may be a dead battery. If you hear clicking, but the engine doesn`t crank, the starter might not be getting enough electricity. Using your owner`s manual and a voltmeter, you should be able to test functionality.
When you have a brand-new battery but still can`t start the car, the alternator might be the issue. Cold and damp climates may increase wear on an alternator, causing it to fail. Flickering gauges and a burning rubber smell could indicate that the alternator overheated and requires replacement.
When your car`s timing belt is broken or irreplaceable, your engine will not be able to ignite or turn over properly. This means when you turn the key, you may hear the starter motor engage, but since the timing belt is responsible for operating the crank and shaft, it will not fully ignite.
The crankshaft position sensor monitors the position and speed of the crankshaft and other parameters that play an important role when starting the engine. If the crankshaft position sensor is having a problem, the vehicle may have intermittent starting issues or not start at all.
An effective method to determine whether it`s your battery or alternator that`s gone bad is to connect jumper cables from a running vehicle`s battery to yours. After a few moments, try starting your vehicle. Once it`s started, remove the jumper cables — if your engine stalls, your alternator has probably gone bad.
When you attempt to start the vehicle, is there a clicking sound, but it won`t turn over? That may be a good sign. If a jump gets the car running, but won`t turn over again once it`s shut off, a dead battery is likely the cause.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Fuel pump engages. Batery good, alternator good volts, jump start helps when wont start. Temp does not matter. Intermittent?
ANSWER : Hello. Thank you for writing in. There are several reasons your vehicle may only start when jump starting. The first and most common is a build up of resistance that is causing you to need a boost of voltage to get the engine started. This may be due to poor battery cables, a bad ground connection, a poor starter solenoid, and a couple of other issues. The first thing you want to do is perform a visual inspection of the starting system. Make sure there is no corrosion build up in the battery cables. You can also check the resistance across these wires and make sure you have a solid connection between components. You then want to make sure the starter solenoid is doing its job. It is responsible for taking the small amount of electricity sent by the ignition and turning it into a huge electrical charge that is strong enough to push over the engine with the help of some gear ratios in its favor. Do some more testing, and stick to the basics before assuming its something seriously complicated.

Read Full Q/A … : Engine failure to start

Cranks over start than dies
ANSWER : Hi There,
The idle air control valve is a small valve on the engine’s intake system that reads the air intake as it comes into the motor. This is controlled by the car’s ECM which uses this information to make adjustments to the air/fuel ratio depending on various inputs such as outside air temperature, intake air temperature, load and various other things. As you accelerate, your car’s engine is receiving a much higher dose of fuel than when at idle and conversely, when you let off the gas pedal, there is a sudden change in this fuel supply as a result of your foot letting off the pedal. When this happens, the job of the idle air control valve is to bring this deceleration down to a slow and smooth idle rather than suddenly cutting off the fuel supply causing the motor to die. When the idle air control valve is not working properly, this cause a disruption in this process resulting in the engine not being able to idle properly. I would recommend having a professional come to your location to diagnose and inspect your vehicle.

Read Full Q/A … : Engine failure to start

Engine tapping noise related to short term fuel trim but only on cold start up.
ANSWER : Has a mechanic’s stethoscope been used to track down the specific location of the noise? There are several solenoid valves in the engine bay that do not run all the time and may be pretty loud once they start, such as an evaporative emissions purge valve and the like. The high fuel trims on one bank sound like you may have a problem on one side with a vacuum leak. A positive trim means air is being added and the computer is trying to add fuel to compensate.

I recommend having an experienced technician, such as one from YourMechanic, come to your location to determine why the engine is making a noise and suggest the proper repair.

Read Full Q/A … : Engine failure to start

Engine starts but stalls immediately
ANSWER : This may be an issue related to what is called an idle air control module. This is a module that regulates the amount of air that is allowed into the intake system as it is mixed with the fuel before being injected into the motor. When this is not working properly, this will cause the car to stall as you describe. I would suggest having an expert from YourMechanic come to your home to definitively diagnose the stalling issue and make necessary repairs.

Read Full Q/A … : Engine failure to start

Difficult start with hot engine, shutting off at start – 1990 Pontiac Grand LeMans
ANSWER : Hello there, thanks for writing in. You may have a few different things going on with your 1990 Pontiac Grand LeMans. These codes are most likely all related and have a few common causes. The most likely causes for this would be a stuck, open, or faulty thermostat, coolant temperature sensor, vacuum leak, spark plugs, exhaust leak, or an oxygen sensor. A certified automotive technician such as one from YourMechanic will perform a check engine light is on inspection and diagnose the fault performing any repairs required.

Read Full Q/A … : Engine failure to start

Vehicle won’t start, once it’s jump started it only stays running until you turn it off, then it work start again without jumping.
ANSWER : Hi there. There could be two problems here. It is possible that your battery is bad and will not take a charge from your alternator while driving. In that case every time you shut your car off you will not have enough juice to start it again. Inspect your battery – it should have at least 12.5 to 13 volts to start your car, if it doesn’t you will need to replace the battery. The second problem could be that your alternator is bad and not charging your battery, in this case you will need to replace your alternator. Both the battery and the alternator can be tested in your car. If you would like to have the car checked for you, a certified professional from YourMechanic can come to your car’s location to diagnose the starting problem and proceed with repairs.

Read Full Q/A … : Engine failure to start

Car engine dies
ANSWER : The first thing I would do is have the turbo/intake system ’smoke’ tested or visually inspected for any leaks. Without a smoke machine, you could spray your engine and turbo system with brake cleaner and listen for idle changes to help determine if there is a leak. The brake cleaner method is not as effective as using a smoke machine.

Next, checking your fuel pressure is in order to see if you lose fuel pressure as it sits or if the fuel pump in the tank is weak. If the fuel pump in the tank is weak or losing pressure, it would cause the engine to crank as you mentioned. Performing a fuel pressure test is not easy and requires a special tool. If you want to have this looked at a technician from YourMechanic can come to your car’s location to diagnose your stalling issue.

Read Full Q/A … : Engine failure to start

Car won’t start after driving any distance. I have to let it cool down before I can start the engine again.
ANSWER : It’s curious that you don’t seem to have a code in the ECM. Usually if you have a malfunction that prevents the car from starting, there will be a code resulting. That being said, it sounds like you may have an issue with a crank position sensor or an ignition control module. Both of these have a history of failing when they are hot and coming back to life again when they are cold. A bad crank sensor will almost certainly result in a code, but an ignition module might not. It’s hard to say what the issue is about the door lock, but it is probably not related.

Both of those pieces are pretty expensive, so I don’t recommend just replacing them to see if it works. Your best course of action would be to have a mechanic check it out so you don’t replace anything you don’t need. YourMechanic can send a technician to your home to diagnose the starting problem firsthand and recommend an accurate fix.

Read Full Q/A … : Engine failure to start