Dodge Challenger bolt pattern.

What is the bolt pattern range for a dodge challenger
Experienced mechanics share their insights in answering this question :
Hello. The stock bolt pattern for the Dodge Challenger is 5 x 115mm, 5 lug wheel with a medium offset. Using wheels with any other bolt pattern or too high or low of offset may result in improper fitment or vibrational issues.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

Most Dodge vehicles have a lug pattern of 5×5 or 5×4. 52. However, you`ll need the exact measurements of your Dodge`s wheels if you want to swap your rims for a new set.
The 2015 Dodge Challenger`s bolt pattern is 5×4. 53, or 5 on 4.53. This means that each wheel has five bolts in a circle with a diameter of 4.53 inches.
A 2013 Dodge Challenger has a bolt pattern of 5 on 4.53 (or 5×4. 53). This means that each wheel has 5 bolts arranged in a circle, and the diameter of that circle is 4.53 inches.
Wheels with a 5×115 bolt pattern can be found on a ton of great vehicles, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs and more. Whether you`re rocking that classic American muscle or a refined vehicle that boasts high-end luxury, you can amp up your ride`s looks with 5×115 wheels.
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee`d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
5×114.3, also known as 5×4.5 is a very common bolt pattern used on many Honda, Nissan, Infiniti, Lexus, Toyota, Hyundai, Ford, and more. 5×114.3 wheels are available in 14″, 15″, 16″, 17″, 18″, 19″ and 20″ diameters in a wide range of widths and offsets to fit just about any car, SUV or light truck on the road.
5×114. 3 bolt pattern same as 5×4.
Dodge Challengers come with a 5×115 bolt pattern and 18“, 19“ or 20“ rim diameters, depending on the year model and trim level of your Challenger.
– Built with a 5×115 bolt pattern.
All Dodge Challengers manufactured from 2008 onwards have a bolt pattern of 5 x 4.53 inches (5×115 mm).
The bolt pattern on a 2012 Dodge Challenger is 5×4. 53. This means each wheel has five bolts which form a diameter of 4.53 inches.
Regardless of its rim diameter, your Charger rims will feature a 5×115 bolt pattern.
The 5×115 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (115), the notional circle determined by the center position of the studs. Wheel backspace is the distance from a wheel`s mounting surface to the back edge of the wheel.
There is a definite difference between 114.3 and 115 – its not just rounding. 1 inch is exactly 25.4 mm – so 4.5 inch is exactly 114.3 mm. They are very close though yes.
A: If your car has 5×114. 3 lugs, your new rim has 5×100 lugs, these will fit.
PERRIN 20mm Wheel Adapters allow you to fit 5×120 wheels onto your 5×114.
There is a definite difference between 114.3 and 115 – its not just rounding. 1 inch is exactly 25.4 mm – so 4.5 inch is exactly 114.3 mm. They are very close though yes.
Yes, 5×114.3 and 5×4.5 are the same bolt pattern; the only difference is the unit they are measured in. The 5×114.3 bolt pattern is measured in metric, while the 5×4.5 is measured in inches.
Product Information: The wheel adapter set is used on 5×120 bolt pattern hubs to fit 5×115 bolt pattern wheels. They will space out your wheels for 1-inch to help you get enough clearance for wider tires and rims.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Ignition coil bolt can’t bolt down
ANSWER : The valve cover on that side of the engine has the broken bolt boss. The only way to secure the coil is to either replace the valve cover so you have the bolt boss to bolt down the coil, or to change the coil involved in the misfire.

Read Full Q/A … : Dodge Challenger bolt pattern.

Dodge Challenger bolt pattern.
ANSWER : Hello. The stock bolt pattern for the Dodge Challenger is 5 x 115mm, 5 lug wheel with a medium offset. Using wheels with any other bolt pattern or too high or low of offset may result in improper fitment or vibrational issues.

Read Full Q/A … : Dodge Challenger bolt pattern.

leaking gas underneath. right where the transmission cover is. right at the very end bolt of the trans bolts rear bolts
ANSWER : Hello. A fuel leak from underneath the vehicle is probably going to be caused by a faulty fuel line. I would carefully examine all the fuel lines that run underneath the vehicle, placing extra attention on the ones that run near where your fuel is leaking from. It may be possible that a fuel hose or even hard line has ruptured and is leaking your fuel. Keep in mind that you may have to remove the cover to access some of the lines. I would recommend you stop driving the vehicle until the issue is fixed, as leaking fuel presents a safety hazard. If you need help having this resolved, a professional from YourMechanic can come to your home or office to diagnose the leak and assist with repairs.

Read Full Q/A … : Dodge Challenger bolt pattern.

I need the torque specifications for the caliper bracket bolts, banjo bolt, and caliper slide bolts.
ANSWER : The caliper bracket bolts are 125 ft lbs. The banjo bolt for line connection is 35 ft lbs. The caliper slide bolts are 26 ft. lbs.

Read Full Q/A … : Dodge Challenger bolt pattern.

Removing bolt from red current line connected to the car’s battery.
ANSWER : The square headed bolt is designed to keep the bolt from turning when you are trying to tighten or loosen the nut on the other side. To loosen the nut on the other side you will want to turn it to the left. There is a very old saying that uses the acronym "righty tighty, lefty loosey" that is usually a good rule of thumb. There are certain cases where things will have what are called reverse threads where this is not true and is in fact the opposite, but generally speaking, this is usually a good rule to remember.

Read Full Q/A … : Dodge Challenger bolt pattern.

My idler pulley bolt snapped off on my 98 ford contour, what does the pulley bolt go into so I can get that part
ANSWER : The part is a bracket and due to the age of the car the part is almost undoubtedly no longer available from Ford and there is no aftermarket for this part. The normal practice in a case like this is to simply drill the bolt out, re-thread the hole (with a heli-coil insert if necessary) and the problem is solved. This can sometimes be done without removing the part from the car (compact right angle drills) but even if you have to unbolt a bracket, once you have the bracket off it becomes even easier to just drill it out and thus will be much cheaper to fix what you have, and less time consuming than running around to junkyards trying to find a used part. Repair of broken bolts is no big deal and is a routine occurrence in the field. I would recommend you simply request repair service for the bolt repair and this can be resolved quickly by a mobile mechanic who travels right to your location. If you have further questions or concerns as you decide what to do, do not hesitate to re-contact YourMechanic because we want you to make the most of your repair dollars and help you get the best possible results.

Read Full Q/A … : Dodge Challenger bolt pattern.

Robert I removed the output vss from a 2001 cherokee there bolt is stuck in the old sensor it has 2 different diagonal thread patt
ANSWER : If you are replacing the sensor and the bolt is stuck in the old sensor, just simply buy a new bolt. It is standard metric hardware and is probably an 8 mm bolt with a 1.25 thread pitch but simply bring the old bolt to any hardware store and they will have it. Just be sure the thread is exact and when you install the new sensor turn the bolt in by hand ONLY to be sure you have the right bolt and to avoid cross threading the threads in the hole. If you have any difficulty, simply request speed sensor installation/repair and the responding certified mechanic will get this taken care of for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Read Full Q/A … : Dodge Challenger bolt pattern.

Difference between a 2011 Dodge Grand Caravan SE and 2011 Dodge Grand Caravan C/V besides the seating? Chassis & suspension diff?
ANSWER : The C/V version is rated for 1,500 pounds of cargo and 300 pounds of passengers (1,800 pounds combined). All other versions of this vehicle, including the SE, have a suspension rated for 1,150 pounds max, passengers and cargo combined. Obviously, if you take the seats out of an SE you will reach your minimum required payload of 1,200 pounds. To determine the exact load carrying capacity of a vehicle simple view the certification placard on the door pillar which will contain the GVWR (subtract curb weight to get cargo capacity) but note that ratings per axle which must be observed to avoid overloading and dangerous operating conditions. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Read Full Q/A … : Dodge Challenger bolt pattern.