Cvt is shuttering on take off from a stop. Forward and reverse. Is it done for.

Cvt transmission is shuttering on take off from a stop. Foward and reverse. Is it done for.

My car has 132000 miles.
My car has an automatic transmission.

Experienced mechanics share their insights in answering this question :
Hi there. That is definitely one of the signs that the CVT transmission is having issues. However, without a proper inspection it would be difficult to determine if the transmission assembly is in need of replacement or if there are other possible concerns that could be identified and does not involve replacing the transmission assembly. I suggest having a qualified technician perform an inspection to avoid replacing unnecessary parts or perform unnecessary services. Your Mechanic has several available technicians that can assist you with a transmission is shuddering inspection.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

The weights that control the pulleys become dirty and worn, causing the car to shudder—far from the smooth ride that you expected from a CVT. No matter how well you care for the CVT, the belt breaks and the bearings become out of shape, and a very expensive and extensive repair ensues.
Surging, Lurching or Jumping – Along with the other common symptoms of a bad CVT transmission, surging can be a sign of contaminated transmission fluid. When your transmission becomes too polluted or filled with debris over time, your vehicle might begin to accelerate, jerk, lurch.
As the belt and pulleys inside a CVT begin to wear, the belt may begin to slip, causing a “judder” sensation, which Nissan describes as being a “shake, shudder, single or multiple bumps or vibration.”
Some common problems to look out for with your CVT include: Transmission `jerking`, slipping, grinding or jumping during acceleration when the car is shifting gears. Noisy while driving – some customers have issues with a `whining`, `clanging` or `rattling` sound while driving especially with Nissan CVT`s.
A damaged torque converter can cause torque converter shudder. Damage to the torque converter can occur due to overheating, wear, or manufacturing defects. For example, if the impeller, turbine, or stator blades are damaged or bent, the fluid flow inside the torque converter can become disrupted, leading to shuddering.
The two most likely reasons your vehicle jerks when coming to a stop are: Issues with your car`s transmission: When slowing to a stop, your vehicle must shift gears. A bad transmission (or one that`s low on transmission fluid) can cause a jerking sensation in the cabin when switching between gears.
The original shudder fix. For long term benefit, use LUBEGARD ATF Protectant P/N 60902. For use in ANY automatic transmission fluid except CVT, DCT, and Ford Type F [1986 and earlier models] applications.
You`re all set. Instant Shudder Fixx will work in all makes and models except for older Ford vehicles manufactured before the 1980s that require type F transmission fluid. Instant Shudder Fixx should not be used in continuously variable transmissions, CVTs, or dual clutch transmissions, DCTs.
Nissan vehicles with CVT transmissions still experience shaking, shuddering, overheating and acceleration problems.
The automatic transmission (CVT) can have a “shudder” due to a worn start clutch. Replacing the start clutch should correct this type of shudder condition.
When the belt contacts a pulley in a pushing belt-type CVT, vibration is generated by frictional force due to rubbing between the individual elements that are components of the belt, which is said to increase wear and noise.
You`re all set. Instant Shudder Fixx will work in all makes and models except for older Ford vehicles manufactured before the 1980s that require type F transmission fluid. Instant Shudder Fixx should not be used in continuously variable transmissions, CVTs, or dual clutch transmissions, DCTs.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Cvt is shuttering on take off from a stop. Forward and reverse. Is it done for.
ANSWER : Hi there. That is definitely one of the signs that the CVT transmission is having issues. However, without a proper inspection it would be difficult to determine if the transmission assembly is in need of replacement or if there are other possible concerns that could be identified and does not involve replacing the transmission assembly. I suggest having a qualified technician perform an inspection to avoid replacing unnecessary parts or perform unnecessary services. Your Mechanic has several available technicians that can assist you with a transmission is shuddering inspection.

No reverse in transmission 1997 Chevrolet Express Van 1500
ANSWER : Hello – I believe you have a failure in the reverse input clutch in the transmission. This could be caused by several components in this clutch, all of which will require removal and disassembly of the transmission to repair. To confirm this diagnosis, I recommend a transmission inspection by a mobile, professional mechanic, such as one from YourMechanic, who will come to your location, diagnose this problem, give you an accurate assessment of damage and cost estimate for repairs.

My transmission will not downshift at a stop, upshift from a stop, or go in reverse.
ANSWER : Hi there. Most transmissions have shifting issues with the fluid being dirty. First replace the transmission oil filter and do a transmission oil flush. If the fluid is black, do not attempt to change the fluid as it will make the transmission no longer work. Then drive the vehicle and see if the transmission will act up again. If it does, then either the transmission control system (valve body – brain of the transmission) has a mass cross leak or the transmission is slipping and needs rebuilt or replaced. I recommend seeking out a professional, such as one from Your Mechanic, to help you diagnose your transmission.

I was stopped on the freeway, started to go about 5 mph, the car jerked and stop without warning like the wheels locked up.
ANSWER : Hi, thanks for writing in. I’d be happy to try to help. It is hard to definitively diagnose what the issue is. At first it seems like a transmission issue. Automatic transmissions are rather complicated and can do strange things when they malfunction. If not an issue with the transmission, you could also have a clutch issue. Always start by checking the simple components first. Check your transmission fluid level. Make sure your transmission filter is clean and debris free. When you have the transmission pan off, you can look and see if there are any metal shavings at the bottom. There is often a small magnet at the bottom of the pan designed to gather any metal shavings for a quick diagnosis. This is a sign of more serious transmission problems. Unless you have experience with automatic transmissions, it is not recommended that major repairs be done at home. I suggest taking your car to a transmission specialist for help.

my truck has to go to 3500-4000 rpms to go forward, and it goes forward in reverse. Also it was smoking llike crazy at one point
ANSWER : Hi there. I appears that your transmission has some serious problems. It could be damage to the torque converter, or internal transmission components & seals being broken as well. I would recommend having a professional mechanic complete a car is hard to shift inspection to determine what damage has occurred and what the best repair options are best for your Dodge.

Reversing sensors not working and reversing camera intermittent
ANSWER : Hi there. Depending on your camera setup on your vehicle, most of the wires has sensor tied in the main harness of the system along with the fuses. If the sensor is not clicking, then first check the fuse and make sure that it’s not blown. If the fuse is good, then the sensor is not working then the sensor would need replaced. If you need further assistance with your back up camera, then seek out a professional, such as one from Your Mechanic, to help you.

Stopped moving in forward and reverse
ANSWER : Hello. This could potentially be transmission bands that may need to be adjusted. Also, check to be sure your transmission cooler is working as it should as well. There is also a transmission control module that can sometimes be the cause of something like this. When it is faulty, it can cause intermittent reactions as you describe. For more help with this, I would recommend having an exert from YourMechanic come to your home or office to diagnose and repair this acceleration problem.

My car is not going in reverse and in neutral. It only goes forward, Why? How much charges it will take to fix?
ANSWER : Hi there. The transmission could have overheated as the vehicle was trying to escape the snow. Going back and forth many times will overheat the transmission fluid and make it boil. This will cause clutch materials within the transmission to burn up and no longer work. The smoke that you were seeing could be coming from the transmission as the reverse input clutch could have been burning, or oil on the transmission burning off as the transmission could have been getting hot. I recommend seeking out a professional, such as one from Your Mechanic, to help you with your transmission.

Billing question sent to CS for the cost of the diagnostics and repair of the transmission issue.