Car won’t start after removing sysLOCATE device

After removing an old sysLOCATE device from the car, the car wouldn't start.
Experienced mechanics share their insights in answering this question :
The SysLocate GPS system was designed to track the location and the speed of the vehicle it was installed in. If the device’s power supply was being pulled from the wrong power source or if it wasn’t uninstalled correctly, this may be the cause of a power drainage. Also, the system could have been damaged which would keep the vehicle from starting. An inspection should be carried out by a qualified technician in order to find out exactly what the device may be interfering with.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

Why won`t my car start but I have power? If you attempt to start up your car but the engine won`t turn over and the dashboard lights up, then you most likely have an issue with your battery. You could have a damaged or corroded battery terminal, which is stopping the engine from starting up when you fully turn the key.
Connected to the battery is the alternator, which works to generate power for your vehicle`s electrical components. When you have a brand-new battery but still can`t start the car, the alternator might be the issue. Cold and damp climates may increase wear on an alternator, causing it to fail.
If the car computer fails to maintain the air-to-fuel ratio and timing belt, the car will not start. A bad car computer will make a car stall or require more than ten attempts to start the engine. If you are facing these issues, it is a faulty car computer which left unfixed can lead to no engine start at all.
Bad Sensors

One common culprit for this problem is the crankshaft position sensor, which measures the position and speed of the crankshaft. The computer uses the information from this sensor to know when to fire the spark plugs. If the sensor isn`t working, the spark plugs won`t fire, keeping the engine from starting.

It might be a battery or alternator problem.

If the source of the clicking is electrical, the starter (a small motor energized by the battery that gets the engine running) doesn`t have enough juice to stay powered. So instead, it rapidly turns on and off and produces a clicking noise!

Turning your key turns your battery on, so if you`ve turned your key all the way and the lights come on, but the engine doesn`t turn over, your starter motor could be the culprit. Any signs of electrical failure could also indicate the starter motor needs help.
When you attempt to start the vehicle, is there a clicking sound, but it won`t turn over? That may be a good sign. If a jump gets the car running, but won`t turn over again once it`s shut off, a dead battery is likely the cause.
If your vehicle fails to start for no apparent reason, this is also a good indicator that there may be a problem with the ECU. If you check the car battery, starter and other common electrical components, and the vehicle still does not start, a faulty engine control unit should be the next logical thing to consider.
A faulty ECM can send poor data to your vehicle`s transmission control module (TCM). As a result, the vehicle cannot properly shift gears or apply power, causing the shift to feel awkward, delayed, or even jarring. When this occurs, the engine may sporadically become more active or stall out.
The most common reason cars don`t start is a dead or faulty battery. Even though most cars run on gasoline, they all require electrical power to function. The starter that cranks your engine to start requires an electrical signal to fire. If something`s wrong with your battery, your car engine won`t turn over.
An effective method to determine whether it`s your battery or alternator that`s gone bad is to connect jumper cables from a running vehicle`s battery to yours. After a few moments, try starting your vehicle. Once it`s started, remove the jumper cables — if your engine stalls, your alternator has probably gone bad.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My car will not start Intermittently. I purchased a new battery 2 weeks ago and yesterday the car wouldn’t start. Got a jump and
ANSWER : The issue you are having is probably due to an intermittent fault in the starter motor itself or a deficiency in the starter electrical circuit, for example a large voltage drop due to a poor ground or a high resistance connection. These issues can be readily diagnosed and resolved on a mobile basis if you request a hard starting diagnostic. If you request that diagnostic, the responding certified mechanic will get this resolved for you promptly. Based on Toyota’s Factory Service Manual, the battery should not be disconnected if the vehicle engine is running. The battery acts as a large resistive voltage sink and consequently taking the battery out of the circuit, while the alternator is still running, can create a voltage spike on the car’s electrical system which is not good for voltage sensitive components such as the engine computer. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Car won’t start. The check engine light, battery light, and oil change light are coming on. I tried jumping the car and nothing happened. Why won’t my car start?
ANSWER : Hi and thanks for contacting Your Mechanic. If sometimes your vehicle will start with the new alternator and sometimes it won’t, then there is a loose connection in your charging system. Check all of the wires to the alternator and to the battery. Make sure that the battery cables are clean and tight. Make sure that the wires to the starter are clean and tight. A loose ground to the ignition system will cause the vehicle to not crank over. Check all of the ground wires from the battery to the starter. Make sure that they are clean and tight. If you need further assistance troubleshooting your no start situation, then seek out a technician, such as one from Your Mechanic, that can assist you.

The car crank but won’t start
ANSWER : Hi there. This does sound like an issue with the wiring. If the check engine light is coming on every now and then this means that when it does not come on there is no power to the computer. This can be the wiring harness issue or an ignition switch problem. I would have to test for voltage to the computer when the problem is occurring to be able to find where the issue lies. If you need assistance, a certified YourMechanic technician can be dispatched to your location to inspect your vehicle’s non-start issue and suggest any necessary repairs.

Map sensor car won’t start up good ?
ANSWER : Your MAP sensor is an important input for your computer. It helps determine the load on the engine to calculate the correct amount of fuel to inject. It sometimes takes a few seconds for the vehicle to realize that the sensor is not producing a good signal.

At that point, it will use other methods to determine the fuel rate, such as pre-programmed fuel maps, throttle position, etc. I would suggest replacing the MAP sensor and retesting. If you would like to have it checked first, a certified technician from YourMechanic will be able to scan your vehicle and test components to determine the root cause of your starting issue before making a repair.

My car won’t start, neither does my auto. Start. Sometime it might start if I jump it sometimes it won’t.
ANSWER : Hi there. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem. Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair. You might want to have a mobile mechanic complete a car is hard to start inspection so they can pinpoint the source of the issues you’re having and recommend the right repairs be completed.

Whenever I drive 1.5 miles, the s3 light starts blinking and then when I stop my car and come back to it, the car won’t start.
ANSWER : Hello, thank you for writing in. It is difficult to determine the issue without some more information. To start, when the check engine light illuminates, you want to scan the vehicle for diagnostic codes. These are what set the check engine light off, and are meant to tell the driver what the computer has detected is wrong. Codes can be pulled at most automotive parts stores, and by most technicians. Once you have that information you can focus in on one component or system. If the engine is truly overheating, then you want to start by checking your coolant and fluid levels. For more help with diagnosing and resolving the issue, contact our service department to schedule an appointment.

So I have a hyundai sonata se push to start. My car won’t turn on, power is working, I push tof start but it won’t crank. I don’t
ANSWER : Hi there. It sounds like you have a failed starter. However, without proper testing there is no way to be 100% sure. I suggest having the battery tested first with a digital battery tester that provides current voltage, cold cranking amps, and state of health. Also inspect for corrosion on the terminals and cables as this will cause excessive resistance and not allow proper voltage/amps to the starter. Other possible failures could be in the wiring harness, relay, fuses, or communication network. I suggest having a qualified technician perform an inspection to avoid replacing unnecessary parts. Your Mechanic has several available technicians that can assist you with a car does not start inspection.

car hesitates when trying to start the car ,but when started then i shut car off and start again it will start right up
ANSWER : Hi there:

Sometimes when you have problems starting an engine initially it is caused by a restriction in fuel flow; caused either by clogged fuel injectors or the throttle body that needs to be cleaned. Once the fuel starts to flow and engine warms up, it’s much easier to start. However, it could also be an air filter, EGR valve or other components that causes this issue as well, which is why it’s best to have a professional mobile mechanic complete a car is hard to start inspection so they can pinpoint the source of this issue.