Car will not start, not throwing engine codes, just clicks when turning key in ignition and wont turn over
I have a dodge durango that wont start its got a new battery. Starter checks out fine. No engine codes are being given. Just clicks when trying to start car. Any idea what the problem could be? Hoping its a faulty fuel pump.
My car has 215361 miles.
My car has an automatic transmission.
Experienced mechanics share their insights in answering this question :
This issue is most likely not due to a fuel pump if you are hearing a clicking sound when turning the key. It is possible that the battery may just be discharged. I would recommend taking your battery to a local auto parts store to have the battery charged up or put it on a charger at home if you have one. Once the battery has reached 12.6 volts, it is fully charged. If the clicking sound still occurs, I would recommend having the starter rechecked from a different source.
How to Identify and Fix Common car Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced mechanics :
The most common reasons a Dodge Durango won`t start are a dead battery, an alternator problem, or failed starter.
Flat or faulty car battery
A flat battery is the most common reason your car won`t start and can be caused by a number of things, such as lights being left on, something in the electrical system causing a battery drain, or even a faulty battery that won`t hold its charge.
One common culprit for this problem is the crankshaft position sensor, which measures the position and speed of the crankshaft. The computer uses the information from this sensor to know when to fire the spark plugs. If the sensor isn`t working, the spark plugs won`t fire, keeping the engine from starting.
A click noise when the engine is started is usually attributed to a bad battery or connection. If the battery was recently replaced, I would make sure that it is adequately charged, and that the battery terminals and cables are in good condition.
It could be a minor glitch in the battery terminals, a dead battery, a defective ignition switch and so on. Car starting problems are mainly related to the battery, car self-start system or fuel lines. Below are some of the common reasons why your car is not starting upon switching on the ignition.
Press and hold the valet/override button below the steering column within five seconds of turning the ignition on. Release the valet/override button when the security light on the instrument panel stops blinking. The alarm is reset and disabled.
The most common reason cars don`t start is a dead or faulty battery. Even though most cars run on gasoline, they all require electrical power to function. The starter that cranks your engine to start requires an electrical signal to fire. If something`s wrong with your battery, your car engine won`t turn over.
It sounds like you may have a weak battery, a failing voltage regulator or failing alternator. As you may know, the alternator charges the battery while the engine runs by generating amperage and recharging the battery while the engine turns the alternator pulley.
your car fails to start: the engine`s computer uses the map sensor to gauge atmospheric pressure before the engine is started. a false reading could cause too much or too little fuel to be delivered to the engine. both conditions could keep it from firing up.
When a CV joint becomes damaged, the axle loses its flexibility, and will make a constant clicking noise when the wheels are turned.
About Fuel Pump Replacement
Most fuel pumps will last for the life of the vehicle but occasionally they can fail. Signs of such failure are a car that won`t start or stalls once it has started. Other times, the fuel flow can slowly become starved causing the check engine light to come on.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My 2003 ford explorer wont start up just get click click click click click click click click
ANSWER : If the battery is weak and the voltage is dropping to below 9 volts you will get the clicking without the starter turning the motor. Have the battery voltage checked and if battery cannot hold a load then replace it and clean the battery terminals and recheck system to see if it starts.
Car will not start, not throwing engine codes, just clicks when turning key in ignition and wont turn over
ANSWER : This issue is most likely not due to a fuel pump if you are hearing a clicking sound when turning the key. It is possible that the battery may just be discharged. I would recommend taking your battery to a local auto parts store to have the battery charged up or put it on a charger at home if you have one. Once the battery has reached 12.6 volts, it is fully charged. If the clicking sound still occurs, I would recommend having the starter rechecked from a different source.
Engine turned off but inside of car still on, now engine won’t turn back on.
ANSWER : Hi there. The symptoms you’re describing with your boyfriend’s 2002 Grand Cherokee appear to be related to a broken or worn out ignition switch or relay. The ignition switch on the inside of the steering column is attached to multiple electronic connections that send signals to a relay box; which in turn, sends the signal to the individual components. The issue could be related to the ignition switch, the relay, or any of the components in between. If you want to have the fault pinpointed in person, I would have this starting issue inspected by a trained professional to ensure that the correct repair is made.
Put key in ignition. Lights and everything come on for a second, then went off as I turned the key. Now no power, key stuck
ANSWER : Hi, thanks for writing in. This sounds like your battery cable connections are corroded or loose at the battery. Try to see if the battery connections are loose by wiggling them and see if power returns. If power returns, then have the cables removed, cleaned, and reconnected to test the battery. Hope this helps and best of luck!
The smart key can turn the ignition but can’t start the car
ANSWER : Hi there. It appears that the issues you’re experiencing may be caused by the ignition lock cylinder. In some newer vehicles (made after 2000) this part has multiple springs inside the cylinder that allows you to press the key forward and allow it to automatically spring back once the vehicle starts. If this is not happening, then I suggest having a professional mechanic diagnose the starting problem so that the ignition and starting issue can be addressed properly.
Key turns in ignition but engine doesn’t turn over
ANSWER : Hello there, many different faults can cause your car to not start when the key is turned. In this case the most likely faults would be a ignition switch, key cylinder, worn key, key transponder failure, or a wiring harness fault. A qualified technician such as one from YourMechanic will be able to diagnose your car not starting and make any repairs required to resolve it.
I am having trouble with my key fully turning in the ignition to start. It will turn halfway and I hear a clicking noise.
ANSWER : Hello, thanks for writing in. The symptoms you are experiencing can commonly be caused by a faulty starter, starter relay, or ignition switch. A clicking sound when you turn the key can sometimes be caused by a faulty starter or starter relay. A starter will click if the electric motor in the starter is worn and unable to engage, while a relay will click if it has internal issues. It may also be possible that the ignition switch or cylinder are the source of the issue. If they are worn out they may not be providing adequate contact for the vehicle to properly start. I would try to determine where the noise is coming from and go from there. If you would like help, consider having an expert automotive technician from YourMechanic come to your home or office to inspect and diagnose this issue for you, and make or suggest any repairs as needed.
Car won’t start after seeing engine hot turn a/c off warning light.
ANSWER : Hi there. Check the battery cables and make sure that they are tight and clean. Then check the battery voltage and see if it has a voltage of 12.6 or 12.4. If the battery is less than that, then the battery needs charged. If the battery has 12.4 volts or higher, then place a load tester on the battery and see if the battery can hold a charge when a load is applied. If the battery drops under 9.6 volts, then the battery is no good and needs replaced. If the battery drops to 11.5 volts, then there is a dry cell and possible a burned cell and the battery needs replaced. If you need further assistance with testing your car battery, then seek out a professional, such as one from Your Mechanic, to help you.
