Bought used. Need to erase PIN number. Phone

Need to erase phone code or PIN number. from previous owner and all previous information

My car has 62000 miles.
My car has an automatic transmission.

Experienced mechanics share their insights in answering this question :
Hello, thank you for writing in. Resetting the system should be as easy as holding a few buttons and accessing the right menu. From there it should be rather straight forward once you reach the menu. On some models, you must hold down Menu, Map, and Cancel at the same time to pull up the menu. Your owner’s manual or a repair guide should have some more information on this. With the correct information you may also be able to call the dealership and have the access the system for you. A trained technician may be able to do this as well. For more help resetting the navigation, radio, and phone accessories, contact our service department to schedule and appointment.

How to Identify and Fix Common car Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced mechanics :

Retrieving Your Honda Radio Code

Check inside your glovebox where the radio code will be on a sticker that`s placed inside or the sticker will be your vehicle owner`s manual for the code. Your Honda radio code will also have a specific serial number along with similar credentials for your Honda Navigation system.

Retrieving Your Honda Accord Audio System Code

Check the inside of your glovebox or owner`s manual for the code. It should be on a sticker with the radio serial number.

For example, if your audio system code for your Honda Accord is “33351,” press “3” three times, “5” once, and “1” once. As a result, this will reset and unlock the car`s audio system.
You`re looking for a five-digit number on a small white sticker. It may be placed inside the glove box or on the side, exposed only when the glove box is open.
Retrieving Your Honda Accord Audio System Code

Check your glovebox. There should be a sticker inside with the radio`s serial number and code. Check your owner`s manual. It will have the radio code listed.

If the radio is showing ERR instead of CODE, turn off the vehicle and disconnect the black cable on your battery for one to three minutes. This step will reset the system.
Start your engine and turn on your car`s audio system. Turn it off if it asks for “code”. Press and hold the radio button for approximately 40-50 minutes. During this interval, your car`s audio system will ignore the code and start playing music.
The standard “NATO” phonetic alphabet (actually the International Radio-Telephony Spelling Alphabet) is: Alfa, Bravo, Charlie, Delta, Echo, Foxtrot, Golf, Hotel, India, Juliett, Kilo, Lima, Mike, November, Oscar, Papa, Quebec, Romeo, Sierra, Tango, Uniform, Victor, Whiskey, X-ray, Yankee, Zulu.
“Code 4” means everything is under control or the scene is safe. It indicates the officers are now in charge of the situation they were called to.
A dying battery or even changing the battery will reset your radio the same way a power outage resets your home clocks. Usually, when your battery is changed, all you need to do to reset your Accord radio is to hold the power button for a few seconds until the radio starts up. No code is needed.
Find your owner`s manual and look for the Anti-Theft Radio Identification Card. In the lower right corner, you will see two groups of numbers. The top group (which should be shorter and in bold) is your code. The serial number is the one at the bottom.
Thankfully, finding the radio code for a Honda Accord is a relatively simple process. Most of the time, all you have to do is press and hold the power button for a couple of seconds, allowing the radio to reset.
Is your Honda Civic radio is prompting you to enter a code? Your radio will prompt you to enter a code in the event your battery dies and then is jumped, or if your battery is replaced completely. Before you start searching, hold the radio power button for a few seconds and see if the radio starts.
Device serial number: On most new Honda models, you need to press buttons 1 and 6 on your radio, and once turned on, a 10-digit serial number will appear on the radio display. On older models, the radio may need to be removed from the vehicle, as the radio serial number is located on the back of the system.
Honda Civic radio codes are generally printed on a card or sticker in your original vehicle owner`s manual or glovebox.
Just enter the code by using the radio preset buttons on your Pilot. For example, if your Honda Pilot radio code is “558881,” just press “5” twice, “8” three times, and “1” once. The system will be unlocked, and you`ll once again have access to all of your Honda Pilot radio functions.
4) Look in your glove box and center console

In some Honda models, you`ll find a four- or five-digit number that represents your Code, or an eight-digit number that represents your Serial Number in the glove box or center console. Be sure to check both of these areas before coming down to our Honda dealership.

There is no Bluetooth streaming, but the stereo offers satellite radio and a six-disc changer. Honda stepped up its audio system for the Accord, using a subwoofer to make the sound more dynamic.
Start your engine and turn on your car`s audio system. Turn it off if it asks for “code”. Press and hold the radio button for approximately 40-50 minutes. During this interval, your car`s audio system will ignore the code and start playing music.
Start your engine and turn on your car`s audio system. Turn it off if it asks for “code”. Press and hold the radio button for approximately 40-50 minutes. During this interval, your car`s audio system will ignore the code and start playing music.
You can access your Honda Civic radio code online via the official Honda site. To get the code online, you`ll simply need to enter your customer information such as your zip code, phone number, email address, VIN number (which can be found on a sticker on the driver`s side door), and radio serial number.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Bought used. Need to erase PIN number. Phone
ANSWER : Hello, thank you for writing in. Resetting the system should be as easy as holding a few buttons and accessing the right menu. From there it should be rather straight forward once you reach the menu. On some models, you must hold down Menu, Map, and Cancel at the same time to pull up the menu. Your owner’s manual or a repair guide should have some more information on this. With the correct information you may also be able to call the dealership and have the access the system for you. A trained technician may be able to do this as well. For more help resetting the navigation, radio, and phone accessories, contact our service department to schedule and appointment.

I have Spotify account can I use that in my new Prius with out useing it through my phone by just inputting my account number. How
ANSWER : Hello. According to my research it appears that Spotify can only be used with your vehicle by connecting it with your smartphone. Spotify can be used by connecting your phone to the vehicle via a USB cable, or by syncing it wirelessly via bluetooth. It does not appear that Spotify is offered as a standalone app for your vehicle’s entertainment system, though I would refer to your owner’s manual to verify if that is the case or not.

Why do I need to use my Lic plate number or Vin number.
ANSWER : Your license plate will allow us to get your vehicle identification number. We need the VIN so we can get the correct parts for a repair and to document your vehicle correctly.

How do I use Uconnect phone to redial a number?
ANSWER : If you accidentally hang up during a Uconnect phone call, or simply need to call someone back, you can do so using the redial feature. To do so, follow these steps.

Press the Uconnect phone button, which is on either your steering wheel or center console.
The Uconnect system will say “Ready,” and then beep.
After the beep, say “Redial” to call the last number that your phone dialed.

Tip

When you use the redial feature, Uconnect will call the most recent number that your cell phone dialed, not necessarily the most recent number that the Uconnect system dialed.

How do I use voice recognition to call a phone number?
ANSWER : You can use the voice recognition system to dial a phone number, even if you don’t have the number stored in your contacts. To do so, press the voice command button, which will prompt you by saying “Ready”, followed by a tone. After the tone, say “Dial”. Following the prompt, say the entire number that you wish to say, without pauses.

How do I use a number to make a phone call?
ANSWER : You can make a phone call through the Bluetooth system by dialing it if you do not have the contact saved. To do so, follow these easy steps:
1. Press the Phone button.
2. Rotate the selector knob to Dial, then press the selector knob.
3. Rotate the selector knob to the first digit of the phone number, then press the selector knob.
4. Repeat step 3 for the remaining digits of the number.
5. Rotate the selector knob to the phone icon, then press the selector knob.

I want to make a solar panel charged phone and I wanted to know what I can use to store the energy made by the solar panels.
ANSWER : You can get one or more of the battery storage units that can be hooked to a phone to recharge a phone so you an use it. They can be hooked up to a USB charge port on your small converter hooked up to your solar panels.

How do you store just one phone number from your phone in the HandsFreeLink?
ANSWER : While you can import entire phonebooks (on some phones) into the HandsFreeLink® (HFL) system, you can also add specific names and numbers if you want. This is handy if you only want to store a few close friends and family members in the system. To do it, just follow these steps:

Press the talk button and release it
Say “phonebook”
Tell the HFL system “receive contact”
Listen to the system’s prompts and then select the name/number you want from your phone
Send it to the system
The system will give you more prompts, after which you can add a name to the phone number. If you selected the wrong number, just say “discard”